Haydon Materials, LLC Metal/Non-Metal

Employee tripped on a rock when returning to truck upon completion of specific task

Employee was in the jaw rock crusher control room when EE went to step up on the platform at the control desk. Employee's foot slipped causing EE to fall. EE attempted to catch self and while doing so EE's right hand went through the glass of a window.

Dumped rock out of truck. Was holding tailgate to clean rock off spreader pan. The scraper slipped and caught hand. Lacerated left ring finger.

Employee was holding carriage bolt up so that a nut could be removed with an impact wrench. As the nut was being removed the bolt dropped down and was spinning. The head of the bolt was worn down and had a sharp edge. The spinning bolt cut through the employee's glove causing a laceration to his left index finger requiring 16 stitches.

Employee carrying screen weighing between 40-50 lbs up flight of stairs

Operating pug mill when foreign body entered eye.

While using grease gun on maintenance truck, the hose slipped and handle hit top of left hand.

EMPLOYEE WAS HELPING TO PUT PINS IN DOZER, USING HEAVY JACKS & HE HURT HIS LOWER BACK.

HE WAS GREASING THE PLANT. WENT TO CHECK THE SCALPING SCREEN. HIS HARD HAT FELL OFF. HE RAISED UP AND HIT THE TIP OF HIS HEAD ON A STRIP OF ANGLE IRON.

HE WAS UNLOADING STEEL FFOM THE BUCKET OF THE BACK HOE A PIECE OF THE STEEL SLIPPED, HE WENT TO CATCH IT AND THE STEEL CAUGHT HIS HAND BETWEEN IT AND THE GROUND, BREAKING IT.

HE WAS RUNNING THE CRUSHER CONTROL HOUSE, STANDING ON THE BOTTOM RUNG OF A STOOL, HIS FOOT SLIPPED, HE TRIED TO CATCH HIMSELF AND RAN HIS LEFT HAND THROUGH A PLATE GLASS WINDOW.

HE WAS HELPING TO HANG SHEET METAL ON THE NEW LANT, MOVING IT WITH A SLING OFF OF THE CRANE. THE METAL SHIFTED AND EE GRABBED IT AND CUT THE MIDDLE AND RING FINGERS ON HIS LEFT HAND.

HE WAS HELPING IN THE SETTING UP OF NEW PLANT, WATCHING EE, WHO WAS USING THE CRANE, TO LACE A PIECE OF H BEAM STEEL INTO PLACE, TH ESTEEL SLIPPED AND CAUGHT EE ON THE LEFT WRIST.

HE WAS TAKING THE BATTERY CABLES LOOSE ON A EUCLID R35 THE BATTERY BLEW UP CAUSING ACID TO SPRAY IN THE EYES

HE WAS GRINDING A PIECE OF METAL ON A STATIONARYGRINDER WHEN THE GRINDER GRABBED THE METAL PULLING IT AND HIS LEFT THUMB INTO THE GRINDING WHEEL.

HE WAS TRYING TO LOOSEN A BOLT ON OUR CONE CRUSHER BY HITTING A WRENCH WITH A HAMMER. HE MISSED THE WRENCH AND HIT HIS LEFT THUMB FRACTURING IT.

HE WAS FILLING THE 175C LOADER WITH OIL. WHEN HE PARKED THE LOADER BESIDE THE OIL TANK HE STEPPED DOWN ONTO A THREE FOOT RETAINER WALL AND AS HE STEPPED DOWN FROM THE WALL WITH HIS RIGHT FOOT FIRST HIS LEFT KNEE STRUCK THE TOP OF THE WALL.

HE WAS SERVICING THE ROCK SCREEN, HE SLIPPED AND FELL ON THE SCREEN CUTTING THE BACK OF HIS HEAD, HURTING HIS LEFT SHOULDER, AND CUTTING HIS RIGHT LOWER BACK.

HE WAS USING SHOVEL TO MOVE ROCK UNDER THE CONVEYOR BELT. THE SHOVEL GOT CAUGHT IN CONVEYOR BELT AND KICKED BACK HITTING AND BREAKING THIS RIGHT THUMB.

PUTTING CABLES ON BATTERY ON FRONT END LOADER, DRIVER STARTED IT, ENGINE BACKFIRED, CUTS BURNS TO THE R SIDE OF FACE TEMP LOSS OF HEARING R EAR

HE WAS WORKING IN THE SHOP AND HE WAS BRUSHING SLAG OFF OF SOME WELDED METAL WITH A WIRE BRUSHE, SOME OF THE SLAG FLEW INTO HIS RIGHT EYE.

HE WAS PULLING LEVERS ON THE ROCK BIN AND PULLED MUSCLES IN HIS LOWER BACK.

HE WAS LOADING 5 TRUCK WITH ROCK FROM THE ROCK BIN TO TAKE TO THE STOCK PILE, WHEN HE LOOKED UP A SMALL ROCK FELL IN HIS LEFT EYE.

HE WAS USING A 4RENCH AND HAMMER TO LOOSEN BOLTS ON MACHINERY, THE WRENCH SLIPPED AND HE HIT THE INDEX FINGER ON HIS LEFT HAND.

HE WAS CUTTING WEEDS ON THE SIDE OF BANK, WHEN HE SLIPPED ON SOME ROCK AND TWISTED HIS RIGHT KNEE.

HE WAS DRIVING A PIN OUT OF T HE LOADER BUCKET WITH A SLEDGE HAMMER WHEN THE HAMMER GLANCED OFF THE PIN AND HIT HIM ON THE LEFT HAND