Mining Incidents

Belton Plant 1154: 20 MSHA citations Metal/Non-Metal

Controlled by Arcosa, Inc
Temple, Bell County, TX  ·  Abandoned
MSHA Mine ID: 4101043

Belton Plant 1154 has $3K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Belton Plant 1154.

Fatalities
0
Total incidents
23
Years on record
1986–2019
Latest incident
Jun 2019
Compliance record
MSHA citations since 2001
20
citations
4
significant & substantial
$2,575
proposed penalties
$2,575
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
47
inspections on record
777
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 777 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Belton Plant 1154 has $3K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$3K
proposed penalties
$3K
current assessed
$3K
paid to date
$0
outstanding
20 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2021-04-06.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
20.0%
significant & substantial
5.0%
high negligence or reckless
20.0%
reasonably likely or greater
50.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 35.0% low, 60.0% moderate, 5.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2020-09-16, 5 years ago
0%
of limit-tested samples over the exposure limit
21
samples
2
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg16
  • Unlisted Particulate, respirable, <1% Qtz3
  • Quartz, respirable, >1% Qtz2
Show the individual readings (21)
Date Contaminant Concentration Limit Conc / limit Occupation
2020-09-16 Unlisted Particulate, respirable, <1% Qtz 1.48 Front-end Loader Operator
2020-09-16 Respirable dust, <.1mg 0 Utility Man
2016-08-02 Quartz, respirable, >1% Qtz 0.47 1.63 0.29 Truck Driver
2016-08-02 Respirable dust, <.1mg 0 Hydrating Plant Operator
2016-08-02 Respirable dust, <.1mg 0 Front-end Loader Operator
2016-08-02 Respirable dust, <.1mg 0 Rotary Bucket Ex. Operator
2012-09-18 Respirable dust, <.1mg 0 Truck Driver
2012-09-18 Respirable dust, <.1mg 0 Rotary Bucket Ex. Operator
2012-09-18 Unlisted Particulate, respirable, <1% Qtz 0.12 Truck Driver
2010-05-26 Unlisted Particulate, respirable, <1% Qtz 0.13 Truck Driver
2010-05-26 Respirable dust, <.1mg 0 Bulldozer Operator
2010-05-26 Respirable dust, <.1mg 0 Backhoe Operator
2009-06-09 Respirable dust, <.1mg 0 Mechanic
2009-06-09 Respirable dust, <.1mg 0 Truck Driver
2009-06-09 Respirable dust, <.1mg 0 Front-end Loader Operator
2004-05-19 Quartz, respirable, >1% Qtz 0.18 0.55 0.33 Laborer, Bullgang
2004-05-19 Respirable dust, <.1mg 0 Bulldozer Operator
2004-05-19 Respirable dust, <.1mg 0 Crusher Oper/Worker
2003-05-07 Respirable dust, <.1mg 0 Backhoe Operator
2003-05-07 Respirable dust, <.1mg 0 Truck Driver
2003-05-07 Respirable dust, <.1mg 0 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Belton Plant 1154 recorded 0.00 reportable injury cases per 100 full-time workers in 2020.

Injury rate, 2020
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.77 and the all-US-mining average was 2.08 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 1.52 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2020 * 0.00 0.00 0.000
2017 * 0.00 0.00 0.000
2016 * 8.79 0.00 0.000
2015 * 4.00 0.00 0.000
2014 * 0.00 0.00 0.000
2013 * 0.00 0.00 0.000
2012 * 0.00 0.00 0.000
2011 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Belton Sand & Gravel Company Inc 1950 to 1985
  2. Cen-Tex Ready Mix Concrete Company 1985 to 1992
  3. Arcosa Aggregates, Inc 1992 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2022 9
2021 13
2020 14
2019 16
2017 19
2016 18
2015 18
2014 16
2013 13
2012 12
2011 12
2010 12
2009 10
2008 11
2007 11
2006 9
2005 10
2004 10
2003 10
2002 10
2001 12
2000 10
Source: MSHA quarterly employment and production, updated weekly.

Belton Plant 1154 sits in Bell County, Texas, where the Census mining category is 0.7% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Bell County, Texas · Population 379,811
0.7%
Mining share of county employment
$66,051
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2022 Q3 722 0 0 0.0
2022 Q2 1,129 0 0 0.0
2021 Q3 2,466 0 0 0.0
2021 Q2 4,155 3 2 722.0
2021 Q1 8,013 0 0 0.0
2020 Q4 7,297 1 0 137.0
2020 Q3 7,515 0 0 0.0
2020 Q2 9,373 0 0 0.0
Show 76 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2020 Q1 9,434 0 0 0.0
2019 Q4 9,587 0 0 0.0
2019 Q3 8,055 0 0 0.0
2019 Q2 8,732 1 0 114.5
2017 Q4 8,281 0 0 0.0
2017 Q3 10,929 0 0 0.0
2017 Q2 10,366 0 0 0.0
2017 Q1 11,561 1 0 86.5
2016 Q4 9,938 0 0 0.0
2016 Q3 10,971 0 0 0.0
2016 Q2 11,580 0 0 0.0
2016 Q1 13,006 0 0 0.0
2015 Q4 12,124 1 0 82.5
2015 Q3 12,472 0 0 0.0
2015 Q2 12,706 0 0 0.0
2015 Q1 12,716 1 0 78.6
2014 Q4 12,509 0 0 0.0
2014 Q3 12,279 0 0 0.0
2014 Q2 11,087 0 0 0.0
2014 Q1 10,076 2 0 198.5
2013 Q4 8,949 0 0 0.0
2013 Q3 8,063 0 0 0.0
2013 Q2 7,909 2 0 252.9
2013 Q1 8,286 0 0 0.0
2012 Q4 8,220 1 1 121.7
2012 Q3 8,329 0 0 0.0
2012 Q2 9,059 0 0 0.0
2012 Q1 7,994 0 0 0.0
2011 Q4 8,447 0 0 0.0
2011 Q3 8,477 0 0 0.0
2011 Q2 8,317 0 0 0.0
2011 Q1 7,639 0 0 0.0
2010 Q4 7,495 0 0 0.0
2010 Q3 6,547 0 0 0.0
2010 Q2 6,164 1 0 162.2
2010 Q1 5,517 0 0 0.0
2009 Q4 6,470 0 0 0.0
2009 Q3 6,047 0 0 0.0
2009 Q2 5,206 0 0 0.0
2009 Q1 4,875 0 0 0.0
2008 Q4 6,773 0 0 0.0
2008 Q3 7,419 0 0 0.0
2008 Q2 7,616 0 0 0.0
2008 Q1 7,102 0 0 0.0
2007 Q4 7,193 0 0 0.0
2007 Q3 6,875 0 0 0.0
2007 Q2 6,998 0 0 0.0
2007 Q1 6,437 0 0 0.0
2006 Q4 6,069 0 0 0.0
2006 Q3 6,693 0 0 0.0
2006 Q2 5,198 0 0 0.0
2006 Q1 5,809 0 0 0.0
2005 Q4 5,497 0 0 0.0
2005 Q3 5,772 0 0 0.0
2005 Q2 6,213 0 0 0.0
2005 Q1 5,716 0 0 0.0
2004 Q4 6,452 0 0 0.0
2004 Q3 7,046 0 0 0.0
2004 Q2 6,711 0 0 0.0
2004 Q1 6,784 0 0 0.0
2003 Q4 6,856 0 0 0.0
2003 Q3 6,525 0 0 0.0
2003 Q2 5,757 1 0 173.7
2003 Q1 6,205 0 0 0.0
2002 Q4 5,354 0 0 0.0
2002 Q3 6,073 0 0 0.0
2002 Q2 6,523 0 0 0.0
2002 Q1 6,869 0 0 0.0
2001 Q4 7,018 2 0 285.0
2001 Q3 7,011 0 0 0.0
2001 Q2 7,543 0 0 0.0
2001 Q1 6,741 0 0 0.0
2000 Q4 6,780 0 0 0.0
2000 Q3 6,633 0 0 0.0
2000 Q2 7,442 0 0 0.0
2000 Q1 7,128 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

23 on file

2019 · 1 incident

June 18, 2019 TX · Metal/Non-Metal crane operator, mobile equipment operator (meo), dragline operator, dropball operator, rigger OTHER
Arcosa Aggregates, Inc · Absorption of radiations, caustics, toxic and noxious substances

Employee was fueling up a water pump with diesel when a bee stung them around the neck area.

2016 · 2 incidents

September 8, 2016 TX · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Arcosa Aggregates, Inc · Struck by flying object

Employee was trying to remove a bearing from the bearing housing. EE was using a sledge hammer to knock the bearing loose. When EE struck the head of the sledge hammer against the bearing a small piece of metal flew off the bearing and punctured left leg. Employee received one stitch.

February 9, 2016 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman OTHER
Arcosa Aggregates, Inc · Absorption of radiations, caustics, toxic and noxious substances

Employee was shoveling around the pea gravel belt. EE felt something sting or bite EE's chest. Employee went to the doctor because of the swelling of the bite. Doctor had to lance the insect wound.

2015 · 1 incident

December 29, 2015 TX · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Arcosa Aggregates, Inc · Fall from machine

Employee slipped and fell while trying to enter a dozer. Employee fell 2.5 feet and landed on his right shoulder. The employee felt fine after the incident. He continued to work for eight days without any issues. On 1/12/2016 employee went to his doctor because of dizziness and a headache. The doctor diagnosed the employee with a slight concussion that was caused by the fall.

2010 · 1 incident

January 14, 2010 TX · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Arcosa Aggregates, Inc · Caught in, under or between a moving and a stationary object

While checking front windshield wiper, the wiper became stuck, emplyee got out and found a 1.5 inch diameter rock stuck at the base of the wiper, he grabbed the rock with his left index finger and thumb and pulled back on it, the rock and the wiper started to move back to the start position, catching the left thumb between the wiper arm assembly, caused a fracture on left thumb.

2006 · 1 incident

March 4, 2006 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Arcosa Aggregates, Inc · Struck against stationary object

While changing screens, one screen was too tight, tried to push a little harder to get screen in place and lost balance and fell forward. EE tried to catch himself and hurt left wrist.

2004 · 1 incident

September 3, 2004 TX · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Arcosa Aggregates, Inc · Fall from machine

Dismounting from trackhoe and fell off. and hurt right ankle.

2001 · 2 incidents

July 2, 2001 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Arcosa Aggregates, Inc · Struck against stationary object

EE WAS INSPECTING SHAKER & SCREEN COMPONENTS FORRATTLING NOISE. RIGHT LITTLE FINGER GOT CAUGHT ON SCREEN WHILE CHECKING IT TO SEE IF IT HAD COMELOOSE.

January 22, 2001 TX · Metal/Non-Metal backhoe operator, trackhoe operator, crane operator MACHINERY
Arcosa Aggregates, Inc · Struck against a moving object

WAS RUNNING A GRADER NOT BEING USED TO IT JERKING HAD PULLED SOMETHING IN LEFT ARM.

2000 · 2 incidents

August 28, 2000 TX · Metal/Non-Metal backhoe operator, trackhoe operator, crane operator POWERED HAULAGE
Arcosa Aggregates, Inc · Struck against a moving object

EMPLOYEE WAS DRIVING HAUL UNIT TO PIT WHEN STEERING MALFUNCTIONED. HAUL UNIT RAN OFF HAUL ROAD INTO OPEN FIELD. HE RECEIVED LACERATION ABOVE RIGHT EYE AND BRUISED LEFR KNEE.

May 22, 2000 TX · Metal/Non-Metal dryer operator, kiln operator, dry plant operator, fluid operator, bed dryer operator MACHINERY
Arcosa Aggregates, Inc · Over-exertion in pulling or pushing objects

STRAIN TO RIGHT ELBOW WHILE TRYING TO START AIR COMPRESSOR. INJURY OCCURRED 5/22/00 BUT HE DID NOT WAT TO SEE DOCTOR UNTIL NOW (JUNE 12). DOCTOR DIAGNOSED BURSITIS TO ELBOW AND ORDERED 2 WEEKS REST BEFORE RETURNING TO REGULAR DUTY.

1997 · 1 incident

February 18, 1997 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech OTHER
Arcosa Aggregates, Inc · Struck by... (Not Elsewhere Classified)

(ENVIRONMENTAL FACTOR) WIND BLOWING DUST AND SAND. WIND 20-30-MPH. SAND BLEW INTO EYES. EE HAD SAFETY GLASSES ON.

1995 · 1 incident

July 25, 1995 TX · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor SLIP OR FALL OF PERSON
Arcosa Aggregates, Inc · Fall onto or against objects

AT 8:00 AM. EE WAS IN THE PROCESS OF STARTING PLANT FOR PRODUCTION AS HE WALKED THROUGH PATH WAY FROM MAIN FEED BELT AND HOPPER, A HYD LINE HUNG OVER HYD TANK TO GROUND TRIPPED EE CAUSING HIM TO FALL ON TOP OF ABOUT 2' O.D. ROCK SIN WITCH CAUSED INJURY TO RIGHT ARM AND BACK.

1994 · 1 incident

August 8, 1994 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Arcosa Aggregates, Inc · Struck by falling object

WHILE REPAIRING PIN ON BACKHOE EMPLOYEE UNTIED ROPE HOLDING CYLINDER & CYLINDER FELL ON HIS FOOT & BROKE HIS TOE ON RT FOOT

1992 · 1 incident

May 28, 1992 TX · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Cen-Tex Ready Mix Concrete Company · Struck by falling object

A PIECE OF PLATE METAL WAS BEING LAYED INTO POSITION OT RELIGN THE LOADER BUCKET FOR THE K-95 LOADER WHEN IT FELL ON TOP OF HIS LEFT FOOT AND BUMPED HIS "SHIN BONE." THIS RESULTED IN A BUMP & BRUISE ON HIS SHIN BONE, AND BRUISED THE TENDONS ON TOP OF HIS LEFT FOOT.

1991 · 1 incident

November 4, 1991 TX · Metal/Non-Metal crane operator, mobile equipment operator (meo), dragline operator, dropball operator, rigger MACHINERY
Cen-Tex Ready Mix Concrete Company · Caught in, under or between a moving and a stationary object

INJURED EE WAS PUTTING CRATER GREASE ON OPEN FACE BULL GEAR. HIS CALKING GUN TUBE OF CRATER BURSTED OUT ON THE SIDE AND HE TRIED TO RUB AS MUCH OF THE CRATER ON THE GEARS INTEAD OF REPLACING W ITH ANOTHER TUBE OF CRATER GREASE. THIS ACTION CAUSED HIS HAND TO BE CAUGHT IN THE GEARS WHEN THE HANDLE OF CALKING GUN HUNG ONTO EITHER HIS GLOVES OR BUTTONED SHIRT SLEEVE. HIS RIGHT HAND IN

1990 · 2 incidents

June 14, 1990 TX · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Cen-Tex Ready Mix Concrete Company · Struck by... (Not Elsewhere Classified)

CONE CRUSHER FEEDER HAD MUD STUCK BETWEEN BARS. EMPL GOT STEEL LEVER TO PRY MUD LOSE. WHILE PUSHING AGAINST LEVER HANDS SLIPPED CASUING LEVER TO HIT EMPL IN CHEST.

June 12, 1990 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Cen-Tex Ready Mix Concrete Company · Caught in, under or between (Not Elsewhere Classified)

PULLING TAILGATE BACK LET IT SWING SHUT HAND CAUGHT IN TAILGATE

1989 · 1 incident

October 7, 1989 TX · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Cen-Tex Ready Mix Concrete Company · Fall to the walkway or working surface

STEEL PLATE COVER WAS REMOVED FROM PORTA PLANT AND LAID ON GROUND. GRAVEL COVERED PLATE. HE WAS LIFTING TOOLS TO REPLACE BELTING. HE SLIPPED ON PLATE AND FELL. INJURY WAS TO BACK AND RIBS.

1988 · 2 incidents

June 21, 1988 TX · Metal/Non-Metal outside foreman, leadman HANDLING OF MATERIALS
Cen-Tex Ready Mix Concrete Company · Struck by falling object

I.NAME WAS CHAINING A PIECE OF PIPE TO BE LOADED ONA TRUCK LOADER PICKED UP ONE END OF THE PIPE THEN I.NAME WAS PULLING END OF THE CHAIN UNDER THE PIPE WHEN LOADER ROLLED BACK DROPING PIPE ON HIS HAND ON THE RT.HAND THE MIDDLE & INDEX FINGERS WERE CUT & BRUISED

March 10, 1988 TX · Metal/Non-Metal mine manager, mine foreman, mine owner MACHINERY
Cen-Tex Ready Mix Concrete Company · Struck by flying object

EMPLOYEE WAS BENT OVER GRINDING ON A PIECE OF STEEL.A PIECE OF RUST ENTERED THE EYE.A FACE SHIELD WAS IN USE AT THE TIME OF THE ACCIDENT.

1987 · 1 incident

September 24, 1987 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Cen-Tex Ready Mix Concrete Company · Over-exertion in lifting objects

HE AND I.NAME W9RE CARRYING A GEAR BOX (APPROX. 110 LBS) DOWN SMALL SHAKER STAIRRS. HE PULLED A MUSCLE IN HIS LOWER STOMACH AND GROIN AREA.

1986 · 1 incident

May 19, 1986 TX · Metal/Non-Metal crane operator, mobile equipment operator (meo), dragline operator, dropball operator, rigger MACHINERY
Cen-Tex Ready Mix Concrete Company · Struck by flying object

WHILE OPERATING3A 22B DRAGLINE CLEAN SLUSH PITS AND SLUSH FLEW IN HIS EYE CAUSING 2 SCRATCHES UNDER LEFT EYELID.