CLEBURNE S & G #282 A&B has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at CLEBURNE S & G #282 A&B.
Fatalities
1
Total incidents
28
Years on record
1989–2004
Latest incident
Jun 2004
Compliance record
MSHA citations since 2000
33
citations
4
significant & substantial
$1,358
proposed penalties
$1,358
paid to date
100% of proposed penalties paid to date, a $0 gap.
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 273 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
CLEBURNE S & G #282 A&B has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$1K
proposed penalties
$1K
current assessed
$1K
paid to date
$0
outstanding
23 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2005-06-06.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2005-06-07, 21 years ago
0%
of limit-tested samples over the exposure limit
11
samples
3
limit-tested
Most sampled contaminants
Respirable dust, <.1mg7
Quartz, respirable, >1% Qtz3
Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (11)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2005-06-07
Respirable dust, <.1mg
0
Complete Load-Haul-Dump
2005-06-07
Respirable dust, <.1mg
0
Truck Loader
2005-06-07
Quartz, respirable, >1% Qtz
0.13
1.49
0.09
Laborer, Bullgang
2005-06-07
Respirable dust, <.1mg
0
Crusher Oper/Worker
2003-12-17
Quartz, respirable, >1% Qtz
0.17
1.3
0.13
Mechanic
2003-12-17
Respirable dust, <.1mg
0
Laborer, Bullgang
2000-07-19
Respirable dust, <.1mg
0
Bulldozer Operator
2000-07-19
Respirable dust, <.1mg
0
Front-end Loader Operator
2000-07-19
Quartz, respirable, >1% Qtz
0.18
1.25
0.14
Truck Driver
2000-07-19
Respirable dust, <.1mg
0
Scraper Operator
2000-07-19
Unlisted Particulate, respirable, <1% Qtz
0.32
Truck Driver
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
CLEBURNE S & G #282 A&B recorded 0.00 reportable injury cases per 100 full-time workers in 2005.
Injury rate, 2005
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 3.76 and the all-US-mining average was 4.21 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 3.41 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2005 *
0.00
0.00
0.000
2004 *
8.77
4.39
0.000
2003 *
0.00
0.00
0.000
2002 *
0.00
0.00
0.000
2001 *
11.90
0.00
0.000
2000 *
4.87
4.87
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2006
0
2005
12
2004
18
2003
23
2002
27
2001
34
2000
34
Source: MSHA quarterly employment and production, updated weekly.
CLEBURNE S & G #282 A&B sits in Johnson County, Texas, where the Census mining category is 1.0% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Johnson County, Texas · Population 188,820
1.0%
Mining share of county employment
$81,826
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2006 Q1
0
0
0
2005 Q4
1,499
0
0
0.0
2005 Q3
8,638
0
0
0.0
2005 Q2
9,970
2
0
200.6
2005 Q1
9,837
0
0
0.0
2004 Q4
9,962
1
0
100.4
2004 Q3
11,270
2
0
177.5
2004 Q2
11,278
0
0
0.0
Show 17 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2004 Q1
13,083
0
0
0.0
2003 Q4
12,514
0
0
0.0
2003 Q3
14,541
0
0
0.0
2003 Q2
12,308
0
0
0.0
2003 Q1
13,223
0
0
0.0
2002 Q4
15,025
1
0
66.6
2002 Q3
15,972
0
0
0.0
2002 Q2
16,691
5
0
299.6
2002 Q1
17,411
0
0
0.0
2001 Q4
20,356
0
0
0.0
2001 Q3
22,444
0
0
0.0
2001 Q2
20,960
6
0
286.3
2001 Q1
20,273
0
0
0.0
2000 Q4
19,742
0
0
0.0
2000 Q3
22,295
10
3
448.5
2000 Q2
19,856
0
0
0.0
2000 Q1
20,184
0
0
0.0
Fatalities at this mine
1 recorded
January 26, 1999TX · Metal/Non-Metalcrane operator, mobile equipment operator (meo), dragline operator, dropball operator, riggerFatality · POWERED HAULAGE
IN JANUARY 1999 THE EMPLOYEE COMPLAINED OF NECK PAIN AFTER HE HAD BEEN OPERATING A HAUL TRUCK. HE WAS UNDER A PHYSICIAN'S CARE AND CONTINUED WORKING LIGHT DUTY. ON SEPTEMBER 22, 1999, HE UNDER WENT SURGERY TO CORRECT THE PROBLEM WITH HIS NECK. HE WAS ADMITTED TO INTENSIVE CARE A COUPLE OF DAYS LATER. HE DIED ON 10/1/99. ON 7/25/00, THE COMMITTEE DETERMINED THIS FATALITY TO BE CHARG
REPLACING SCREENS ON SHAKER AT PLANT. CAUSED PAIN TO BACK.
January 21, 2004TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
HAD INSTALLED A NEW ROLLER ON CAT D9R WHEN ONE BOLT BROKE.LOOSENED INSIDE BOLTS SLIGHTLY TO ALLOW ROLLER TO TILT DOWN & OUT OF THE WAY TO REMOVEDUTCHMAN. WHEN REMOVING THE LAST OUTER BOLT THE ROLLER FELL MORE THAN EXPECTED CATCHING THE MIDDLE FINGER ON LEFT HAND. THE ROLLER WEIGHS 250 LBS. WAS USING A 3/4" IMPACT TO LOOSEN BOTTOM ROLLER
EMPLOYEE WAS UNHOOKING FUEL TRAILER FROM PIU, WHEN HE FELT PAIN IN HIS RIGHT HIP. WENT TO SEE DOCTOR. DOCTOR RELEASED HIM TO LIGHT DUTY UNTIL 11-28-01.
October 19, 2001TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDTOOLS (NONPOWERED)
WORKING IN CLOSE QUARTERS WITH HEAVY ITEMS. BEARING & BEARING HOUSING WAS PUSHED ACROSS FLOOR WITH COMEALONG. RAISED & THEN TURNED AND LASHED INTO PLACE.
July 25, 2001TX · Metal/Non-Metalbackhoe operator, trackhoe operator, crane operatorSLIP OR FALL OF PERSON
EE WAS AT THE SCALE HOUSE. A TRUCK WAS COMING UPTO THE WINDOW TOO CLOSE TO HIM SO HE MOVED TO GET OUT OF THE WAY. HE TRIPPED & FELL ON METAL BARRAILING ON CHEST & CHIN.
CLEANING AROUND CRUSHER WITH PRYBAR AND HAMMER. LEFT ARM FROM ELBOW TO MUD SHOULDER BLADE EXPERIENCING PAIN.
March 30, 2001TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
EE SLIPPED AND HIT HIS LEFT SHIN AND CUT IT WHILE WASHING SAND OUT OF SCREW. EE WENT TO HOSPITAL AND HAD SEVEN STITCHES TO CLOSE THE CUT AND WAS SENT HOME.
EE WAS CLEANING PLANT AREA WITH BOBCAT, WHEN HE RAN OVER A LARGE ROCK, THE BOBCAT WAS OFF BALANCE AND AS THE WHEELS OF THE BOBCAT TRAVELED OVER ROCK IT CAUSED EE'S HEAD TO JERK FROM SIDE TO SI DE.
August 13, 1999TX · Metal/Non-Metalcrane operator, mobile equipment operator (meo), dragline operator, dropball operator, riggerHANDLING OF MATERIALS
EMPLOYEE WAS ALIGNING BOLT HOLES ON MAIN SHAFT COUPLING, HE INSERTED LEFT LITTLE FINGER INTO BOLT HOLES TO CHECK ALIGNMENT OF COUPLING, CUTTINGHIS FINGER. HAD CUT CLEANED AND STITCHED UP AT C LINIC. RETURNED TO WORK AT FULL DUTY 8-23-99.
June 23, 1999TX · Metal/Non-Metalcrane operator, mobile equipment operator (meo), dragline operator, dropball operator, riggerOTHER
Trinity Materials Inc · Absorption of radiations, caustics, toxic and noxious substances
STUNG BY BEE ON RIGHT FINGER, WHILE OPERATING B-30 EUCLID. DID NOT MISS ANY WORK.
April 26, 1999TX · Metal/Non-Metalhaul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driverHANDLING OF MATERIALS
EE SLIPPED AND FELL FROM B-70 EUC TO THE GROUND INJURING RIGHT ARM. DAMAGE WAS HE BRUISED RIGHT ARM.
January 12, 1998TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
WHILE REPLACING A BUCKET TOOTH PIN, USING A HAMMER A PIECE OF METAL CHIP OFF AND HIT CHIN CUTTING IT. EE WAS TAKEN TO DOCTOR TO REMOVE PIECE OF METAL IN CHIN. RELEASE TO FULL DUTY THE NEXT DAY
1996 · 1 incident
May 4, 1996TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techMACHINERY
July 20, 1994TX · Metal/Non-Metalcrane operator, mobile equipment operator (meo), dragline operator, dropball operator, riggerHANDLING OF MATERIALS
Lafarge Corp · Caught in, under or between a moving and a stationary object
WERE REMOVING DECK FROM SHAKER. HAD PULLED DECK TO TOP OF SHAKER. ATTEMPTED TO RETIE CRANE TO PANEL WHEN PANEL SLIPPED BACK CATCHING LEG BETWEEN PANEL AND A PIPE.
June 1, 1994TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDTOOLS (NONPOWERED)
EE WAS INSTALLING A NEW TOOTH ON THE DRAGLINE BUCKET THE TOOTH WAS GOING ON HIGH WHEN EE HIT THE TOOTH WITH A SLEDGEHAMMER AFTER ABOUT 15 HITS WITH THE SLEDGEHAMMER A PIECE CHIPPED OF & WENT I NTO EE LEFT BICEP
EMPLOYEE WAS INSTALLING A DUMP CABLE ON THE B30 EUCLID THE CA BLE SLIPPED STRIKING THE HARD HAT THROUGH FOREHEAD OF EMPLOYEE CAUSING A MINER ABRASION TO FOREHEAD
September 11, 1991TX · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorPOWERED HAULAGE
Lafarge Corp · Caught in, under or between a moving and a stationary object
DRIVE PARKED HAUL UNIT ON GRADE AND TRAILER BRAKES AND LEFT MACHINE. MACHINE STARTED ROLLING DRIVER TRIED TO CATCH THE TRUCK COULD NOT AND TIRE ROLLED OVER TWO OF HIS RT FOOT. K BRAKE WAS NOT SET.