Mining Incidents

Berlin Plant: 102 MSHA citations Metal/Non-Metal

Controlled by Heidelberg Materials AG
Williamstown Junction, Camden County, NJ  ·  Active
MSHA Mine ID: 2800615

Berlin Plant has $19K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Berlin Plant.

Fatalities
0
Total incidents
58
Years on record
1984–2018
Latest incident
Jan 2018
Compliance record
MSHA citations since 2000
102
citations
24
significant & substantial
$18,864
proposed penalties
$18,050
paid to date
96% of proposed penalties paid to date, a $814 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
65
inspections on record
1,060
inspection hours
9.6
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
102 citations across 1,060 inspection hours.
Source: MSHA inspections data, updated weekly.

Berlin Plant has $19K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$19K
proposed penalties
$18K
current assessed
$18K
paid to date
$0
outstanding
100 assessments are final orders; 1 contested dockets.
Of $2K in penalties contested before the Commission, $936 was upheld in final decisions.
As of the most recent assessment on 2026-05-20.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
24.0%
significant & substantial
20.0%
high negligence or reckless
24.0%
reasonably likely or greater
56.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 18.0% low, 62.0% moderate, 20.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
5 citations taken to the federal commission · 5% of citations on record
  • Settled 5 · 100%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 2 decided S&S contests · industry: 79%
47%
Penalty reduction in decided contests
$2K proposed, $936 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2009-10-20.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
YORK 2010-23M Settlement Melick 2011 $2K → $936
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2024-04-24
0%
of limit-tested samples over the exposure limit
22
samples
7
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz11
  • Respirable dust, <.1mg6
  • Unlisted Particulate, total, <1% Qtz2
  • Arsenic fumes1
Show the individual readings (34)
Date Contaminant Concentration Limit Conc / limit Occupation
2024-04-24 Quartz, respirable, >1% Qtz 0.35 Laborer, Bullgang
2024-04-24 Quartz, respirable, >1% Qtz 0.31 Dredge/Barge Operator
2023-04-19 Quartz, respirable, >1% Qtz 0.13 Front-end Loader Operator
2023-04-19 Respirable dust, <.1mg 0 Front-end Loader Operator
2023-04-19 Quartz, respirable, >1% Qtz 0.19 Washer Operator
2021-08-27 Quartz, respirable, >1% Qtz 0.27 Front-end Loader Operator
2021-08-27 Quartz, respirable, >1% Qtz 0.19 Washer Operator
2017-01-18 Cobalt fumes 0 100 0.00 Welder, etc.
2017-01-18 Arsenic fumes 0 500 0.00 Welder, etc.
2017-01-18 Beryllium fumes 0 2 0.00 Welder, etc.
2017-01-18 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2017-01-18 Chromium, insoluble 0 1 0.00 Welder, etc.
2017-01-18 Copper fumes 0 100 0.00 Welder, etc.
2017-01-18 Iron oxide fumes 0.01 10 0.00 Welder, etc.
2017-01-18 Lead fumes 0 150 0.00 Welder, etc.
2017-01-18 Magnesium oxide fumes 0 10 0.00 Welder, etc.
2017-01-18 Manganese fumes 0 5 0.00 Welder, etc.
2017-01-18 Molybdenum fumes 0 10 0.00 Welder, etc.
2017-01-18 Nickel fumes 0 1 0.00 Welder, etc.
2017-01-18 Vanadium fumes 0 50 0.00 Welder, etc.
2017-01-18 Zinc oxide fumes 0 5 0.00 Welder, etc.
2015-01-14 Quartz, respirable, >1% Qtz 0.29 0.92 0.32 Front-end Loader Operator
2015-01-14 Quartz, respirable, >1% Qtz 0.36 0.54 0.67 Utility Man
2011-05-25 Respirable dust, <.1mg 0 Utility Man
2011-05-25 Respirable dust, <.1mg 0 Front-end Loader Operator
2011-05-25 Quartz, respirable, >1% Qtz 0.16 0.53 0.30 Utility Man
2011-05-25 Unlisted Particulate, respirable, <1% Qtz 0.17 Dredge/Barge Operator
2004-10-06 Respirable dust, <.1mg 0 Dredge/Barge Operator
2004-10-06 Quartz, respirable, >1% Qtz 0.15 0.75 0.20 Truck Driver
2004-10-06 Respirable dust, <.1mg 0 Front-end Loader Operator
2004-10-06 Respirable dust, <.1mg 0 Washer Operator
2004-10-06 Quartz, respirable, >1% Qtz 0.14 1.39 0.10 Front-end Loader Operator
2001-11-07 Unlisted Particulate, total, <1% Qtz 1.07 Washer Operator
2001-11-07 Unlisted Particulate, total, <1% Qtz 1.8 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Berlin Plant recorded 0.00 reportable injury cases per 100 full-time workers in 2023.

Injury rate, 2023
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.78 and the all-US-mining average was 2.10 cases per 100 workers.
In New Jersey, metal and nonmetal mining averaged 2.45 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2023 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2015 * 0.00 0.00 0.000
2014 * 0.00 0.00 0.000
2013 * 8.38 0.00 0.000
2012 * 0.00 0.00 0.000
2011 * 0.00 0.00 0.000
2010 * 14.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. George F Pettinos Inc 1950 to 1998
  2. Hanson Aggregates BMC, Inc. 1998 to 2022
  3. Heidelberg Materials Northeast LLC 2022 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 11
2025 11
2024 9
2023 9
2022 9
2021 9
2020 9
2019 9
2018 9
2017 9
2016 10
2015 9
2014 10
2013 10
2012 11
2011 10
2010 12
2009 12
2008 16
2007 18
2006 18
2005 17
2004 17
2003 19
2002 19
2001 15
2000 15
Source: MSHA quarterly employment and production, updated weekly.

Berlin Plant sits in Camden County, New Jersey, where the Census mining category is 0.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Camden County, New Jersey · Population 524,042
0.1%
Mining share of county employment
$86,384
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 6,031 1 0 165.8
2026 Q1 4,414 0 0 0.0
2025 Q4 5,239 1 0 190.9
2025 Q3 5,935 1 0 168.5
2025 Q2 5,180 0 0 0.0
2025 Q1 2,422 2 0 825.8
2024 Q4 4,479 3 1 669.8
2024 Q3 4,944 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 4,629 2 1 432.1
2024 Q1 5,091 0 0 0.0
2023 Q4 5,763 3 0 520.6
2023 Q3 5,201 0 0 0.0
2023 Q2 4,725 2 0 423.3
2023 Q1 4,916 0 0 0.0
2022 Q4 4,413 2 0 453.2
2022 Q3 5,670 1 0 176.4
2022 Q2 3,222 0 0 0.0
2022 Q1 4,607 1 0 217.1
2021 Q4 4,816 0 0 0.0
2021 Q3 5,675 4 1 704.8
2021 Q2 5,481 0 0 0.0
2021 Q1 4,124 6 1 1454.9
2020 Q4 5,132 0 0 0.0
2020 Q3 5,408 1 0 184.9
2020 Q2 3,192 0 0 0.0
2020 Q1 4,182 0 0 0.0
2019 Q4 4,440 2 2 450.5
2019 Q3 4,720 2 0 423.7
2019 Q2 4,906 1 0 203.8
2019 Q1 3,736 2 2 535.3
2018 Q4 5,634 0 0 0.0
2018 Q3 4,550 1 1 219.8
2018 Q2 4,025 0 0 0.0
2018 Q1 4,331 2 0 461.8
2017 Q4 3,732 0 0 0.0
2017 Q3 4,782 0 0 0.0
2017 Q2 5,003 1 0 199.9
2017 Q1 5,297 1 0 188.8
2016 Q4 5,150 0 0 0.0
2016 Q3 4,472 0 0 0.0
2016 Q2 4,038 3 1 742.9
2016 Q1 4,573 2 1 437.3
2015 Q4 5,722 0 0 0.0
2015 Q3 4,588 0 0 0.0
2015 Q2 5,346 2 1 374.1
2015 Q1 4,757 2 1 420.4
2014 Q4 5,481 0 0 0.0
2014 Q3 5,406 2 0 370.0
2014 Q2 5,802 0 0 0.0
2014 Q1 4,557 1 0 219.4
2013 Q4 7,235 0 0 0.0
2013 Q3 6,426 0 0 0.0
2013 Q2 5,706 1 1 175.3
2013 Q1 4,505 3 1 665.9
2012 Q4 4,569 0 0 0.0
2012 Q3 5,462 0 0 0.0
2012 Q2 5,807 1 0 172.2
2012 Q1 5,714 0 0 0.0
2011 Q4 6,651 0 0 0.0
2011 Q3 5,689 3 0 527.3
2011 Q2 4,705 2 0 425.1
2011 Q1 4,698 5 3 1064.3
2010 Q4 6,415 0 0 0.0
2010 Q3 6,542 0 0 0.0
2010 Q2 7,458 1 0 134.1
2010 Q1 8,158 0 0 0.0
2009 Q4 6,092 3 2 492.4
2009 Q3 5,880 5 2 850.3
2009 Q2 3,939 0 0 0.0
2009 Q1 8,859 0 0 0.0
2008 Q4 8,191 0 0 0.0
2008 Q3 10,850 0 0 0.0
2008 Q2 9,565 0 0 0.0
2008 Q1 8,378 4 0 477.4
2007 Q4 12,146 0 0 0.0
2007 Q3 14,198 0 0 0.0
2007 Q2 14,083 0 0 0.0
2007 Q1 13,207 0 0 0.0
2006 Q4 11,998 1 0 83.3
2006 Q3 11,467 0 0 0.0
2006 Q2 11,451 3 0 262.0
2006 Q1 12,257 0 0 0.0
2005 Q4 11,847 7 1 590.9
2005 Q3 13,144 0 0 0.0
2005 Q2 11,192 0 0 0.0
2005 Q1 9,097 0 0 0.0
2004 Q4 13,545 2 0 147.7
2004 Q3 10,509 0 0 0.0
2004 Q2 11,328 0 0 0.0
2004 Q1 9,324 2 1 214.5
2003 Q4 11,337 0 0 0.0
2003 Q3 10,343 0 0 0.0
2003 Q2 12,888 0 0 0.0
2003 Q1 11,820 0 0 0.0
2002 Q4 11,698 0 0 0.0
2002 Q3 12,881 0 0 0.0
2002 Q2 13,172 0 0 0.0
2002 Q1 8,872 0 0 0.0
2001 Q4 9,253 0 0 0.0
2001 Q3 8,322 0 0 0.0
2001 Q2 8,823 0 0 0.0
2001 Q1 7,382 0 0 0.0
2000 Q4 8,294 1 0 120.6
2000 Q3 8,536 0 0 0.0
2000 Q2 9,120 0 0 0.0
2000 Q1 8,262 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

58 on file

2018 · 1 incident

January 10, 2018 NJ · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Hanson Aggregates BMC, Inc. · Fall onto or against objects

EE was rebuilding slurry pump at booster EE took rubber guard off of hub seal on pump and laid it on ground next to work area as EE continued to perform task EE tripped on rubber guard and fell on stump and injured lower right side of back and cracked a rib.

2013 · 1 incident

September 23, 2013 NJ · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Hanson Aggregates BMC, Inc. · Struck by falling object

EE was working on the classifier and had the steel cover opened on the station. The cover fell on and lacerated his left middle finger. EE received six sutures to his middle finger.

2010 · 2 incidents

September 21, 2010 NJ · Metal/Non-Metal clerk, timekeeper, office worker, director of sales HANDLING OF MATERIALS
Hanson Aggregates BMC, Inc. · Over-exertion in lifting objects

The office clerk injured her right wrist when she was moving a box of ticket paper into piece to feed the printer. A wrist splint was applied to support her sprained wrist.

July 30, 2010 NJ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDTOOLS (NONPOWERED)
Hanson Aggregates BMC, Inc. · Struck by... (Not Elsewhere Classified)

The ee was cutting a piece of rubber with his right hand. He was cutting away from his body and out his left pointer finger (was holding the rubber in place with his left hand) Resulted in taking off distal of left pointer. Work status is restricted duty, must keep clean, dry and covered. Wear finger splint. Follow up on Monday 8/2/10.

2008 · 1 incident

January 21, 2008 NJ · Metal/Non-Metal ledgeman/hand, quarry man SLIP OR FALL OF PERSON
Hanson Aggregates BMC, Inc. · Fall to lower level, (Not Elsewhere Classified)

EE was walking and did not notice he was standing on ice, the ice was covered with sand. The ice broke and he went down to his shins and jarred his back.

2006 · 1 incident

February 25, 2006 NJ · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Hanson Aggregates BMC, Inc. · Struck against stationary object

EE stepped in grease before mounting equipment. When EE was climbing ladder to the truck, his foot slipped on step. He held on with one arm and bumped his arm into the trucks fire extingusher holder.

2005 · 1 incident

May 9, 2005 NJ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Hanson Aggregates BMC, Inc. · Struck against a moving object

A loading truck was off of the loading road and had his truck stuck in a loading area.Our loader operator was unaware of the vehicle directly behind him and as he backed was unable too see truck and made direct contact.No damage to loader still waiting on quotes for truck.The only injury was a neck strain to loader operator.

2004 · 1 incident

2003 · 2 incidents

August 8, 2003 NJ · Metal/Non-Metal

EMPLOYEE WAS INSIDE WORKBOAT PULLING ON POWER CABLE FOR DREDGE WHEN HE LOST HIS BALANCE STRIKING HIS KNEE AGAINST BOAT AND TWISTING HIS BACK.

January 14, 2003 NJ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Hanson Aggregates BMC, Inc. · Over-exertion (Not Elsewhere Classified)

EE WAS STEPPING DOWN OFF OF DREDGE PLATFORM AND TWISTED RIGHT FOOT ON WASH HOSE BREAKING LOWER BONE IN RIGHT FOOT.

1998 · 1 incident

December 1, 1998 NJ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Hanson Aggregates BMC, Inc. · Caught in, under or between (Not Elsewhere Classified)

MECHANIC WAS USING A PRYBAR TO DISENGAGE DRIVE SHAFT FROM HUB OF PARKING BRAKE ASSEMBLY. DRIVE SHAFT SPUN UNEXPECTEDLY AND EE'S FINGER WAS PINCHED BETWEEN PRYBAR AND FRAME OF LOADER. TIP OF IN DEX FINGER WAS CUT OFF.

1997 · 3 incidents

July 29, 1997 NJ · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
George F Pettinos Inc · Contact with hot objects or substances

TWO EMPLPOYEE WERE CHECKING A 125 H.P. PUMP. PUMP HAD LOST PRIME AND WAS RUNNING WITHOUT WATER. THE OTEHR EMPLOYEE TOOK VALVE BONNET OFF AND STEAM ESCAPED & BURNED THEM BOTH.

July 29, 1997 NJ · Metal/Non-Metal belt foreman, maintenance foreman, maintenance supervisor HANDLING OF MATERIALS
George F Pettinos Inc · Contact with hot objects or substances

EMPLOYEE WAS CHECKING A 125 H.P. PUMP. PUMP HAD LOST PRIME AND WAS RUNNING WITHOUT WATER. HE TOOK VALVE BONNET OFF AND STEAM ESCAPED AND BURNED HIM AND ANOTHER EMPLOYEE.

January 4, 1997 NJ · Metal/Non-Metal mine manager, mine foreman, mine owner POWERED HAULAGE
George F Pettinos Inc · Struck by powered moving object

EE ATTEMPTED TO CROSS SPUR 536 FROM THE DRIVEWAYOF GEOR. F. PETTINOS, INC., HE STATED HE DID NOTSEE OTHER VEHICLE WHICH WAS TRAVELING WEST ON SPUR 536 AND WAS STRUCK BROADSIDE.

1996 · 1 incident

May 11, 1996 NJ · Metal/Non-Metal mine manager, mine foreman, mine owner HANDLING OF MATERIALS
George F Pettinos Inc · Over-exertion in lifting objects

EE WAS LIFTING MAN HOLE COVER OFF HEAVY WEIGHT SCALE AND HURT LOWER BACK.

1995 · 2 incidents

March 23, 1995 NJ · Metal/Non-Metal mine manager, mine foreman, mine owner HANDLING OF MATERIALS
George F Pettinos Inc · Over-exertion in lifting objects

EMPLOYEE WAS HOLDING DRAG LINE CABLE, HE TWISTED & HURT LOWER BACK.

March 6, 1995 NJ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
George F Pettinos Inc · Contact with hot objects or substances

FRONT END LOADER BEGAN TO OVERHEAT. EE REMOVED RADIATOR CAP AND HOT COOLANT BURST OUT OF RADIATOR AND SPLASHED EE ON THE FACE, ARM AND LEG.

1994 · 2 incidents

August 8, 1994 NJ · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
George F Pettinos Inc · Over-exertion (Not Elsewhere Classified)

INJURED WAS SITTING IN A MOXY HAUL TRUCK GETTIN GLOADED. THE OTHER TRUCK CAME TO GET LOADED AS HE BACKED UP HE RAN INTO THE FIRST TRUCK.

June 27, 1994 NJ · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
George F Pettinos Inc · Struck by falling object

EMPLOYEE WAS REMOVING CUTTING EDGES FROM A 966 CAT FRONT END LOADER HE REMOVED THE LAST BOLT & THE CUTTING EDGE FELL ON HIS RT BIG TOE EMPLOYEE CONTINUED WORKING BUT AFTER SIX HOURS ON THE JO B HIS TOE SWELLED UP EMPLOYEE THEN WENT TO HIS DOC WHO TREATED HIM FOR PAIN & SWELLING EMPLOYEE GOT XRAYS THE FOLLOWING DAY

1993 · 1 incident

October 19, 1993 NJ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
George F Pettinos Inc · Struck against a moving object

EMPLOYEE WAS MOVING BAR SAND FROM ONE LOCATION TO ANOTHER HE HIT A PIPE IN THE GOUND WITH THE FRONT END LOADER FRONT END LOADER JARRED CAUSING EMPLOYEE TO HIT HIS CENTER RT ABDOMIN ON THE STEE RING WHEEL

1992 · 1 incident

July 24, 1992 NJ · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
George F Pettinos Inc · Struck by falling object

EE WAS ASSISTING TO PUT A 250 H.P. MOTOR ON PUMP HOUSE TRIPED OVER MOTOR CAME APART AND HIT EE IN THE HEAD.

1991 · 1 incident

June 29, 1991 NJ · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor SLIP OR FALL OF PERSON
George F Pettinos Inc · Fall from machine

EMPL INSTALLING PIPE LINE.HE WAS BEING LIFTED OUT OF TRENCH AND SLIPPED & FELL OFF EXCAVATOR BUCKET ONTO GROUND.

1990 · 1 incident

December 6, 1990 NJ · Metal/Non-Metal mine manager, mine foreman, mine owner HANDLING OF MATERIALS
George F Pettinos Inc · Struck by... (Not Elsewhere Classified)

EE WAS MOVING PIECES OF METAL PLATE IN SHOP IT SLIPPED AND CUT HIS LEFT HAND.

1989 · 1 incident

March 22, 1989 NJ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
George F Pettinos Inc · Fall to the walkway or working surface

EMPL PULLING TORCH TO HOOK UP TO BACK OF PICKUP TRUCK,SLIPPED IN SAND AND IT SLIPPED AND CUT HAND.

1988 · 7 incidents

November 18, 1988 NJ · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
George F Pettinos Inc · Caught in, under or between a moving and a stationary object

OPER. WAS STOCK PJILING PLANT. AS HE WA> GETTING OUT OF DUMP TRUCK DOOR SHIUT ON HAND.

November 7, 1988 NJ · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
George F Pettinos Inc · Over-exertion in lifting objects

EMPL WAS PICKING UP STEEL BED IN SCREEN AND PULLED LOWER BACK

August 18, 1988 NJ · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
George F Pettinos Inc · Over-exertion in pulling or pushing objects

EMPLOYEE WAS PUSHING HARD ON GEAR SHIFT TO TRY TO FREE MACHINE FROM BEING STUCK. HE JAMMED HIS RIGHT WRIST.

March 28, 1988 NJ · Metal/Non-Metal ledgeman/hand, quarry man HANDLING OF MATERIALS
George F Pettinos Inc · Over-exertion in lifting objects

OPERATOR WAS ASSISTING PERSONNEL FROM MILLVILLE IRON WORKS HE WAS ON ONE END OF A 12 IN I BEAM HELPING TO LINE IT UP SO IT COULD BE WELDED WHEN EMPLOYEE PICKED HIS END OF THE II BEAM UP HE FEL T A SHARP PAIN IN HIS RT SIDE

March 21, 1988 NJ · Metal/Non-Metal MACHINERY
George F Pettinos Inc · Struck by... (Not Elsewhere Classified)

EMP WAS ASSISTING IN INSTALLATION OF A PULLEY ON A STACKER, HE WAS GUIDING THE PULLEY INTO POSITION WHEN THE CHAIN LIFTING THE PULLEY BROKE LOOSE FROM THE BUCKET HOOK OF FRONT END LOADER

March 11, 1988 NJ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
George F Pettinos Inc · Caught in, under or between a moving and a stationary object

2 OPERTORS, ONE OPERATING 966 OADER ONE OPERATING A SCRAPER WAGON PARKED THEIR MACHINES SIDE BY SIDE, OPPOSIT DIRECTIONS FOR ACONVERSATION. EMP STEPPED FROM CAB OF SCRAPER ONTO STEP UP LADDE OF 966 LOADER. AFTER CONVERSATION EMP STARTED TO STEP BACK INTO THE SCRAPER CAB AND AT SAME TIME THE 966 L OADER OPERATOR STARTED HIS LOADER, IT STARTED TO

February 1, 1988 NJ · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
George F Pettinos Inc · Struck by falling object

EMPLOYEE WAS REMOVING PUSHING OFF LARGE LUMPS OF FROZEN CLAY FROM FEED BELT CONVEYOR TO PREVENT THEM FROM GOING INTO THE WASH PLANT. A LARGE LUMP OF THE MATERIAL FELL ONTO THE EMPLOYEE S FOOT.

1987 · 15 incidents

November 20, 1987 NJ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
George F Pettinos Inc · Struck by... (Not Elsewhere Classified)

EMP WAS ASSISTI3G IN THE INSTALLATION OF CROWN BAR RUBBER ON SCRREN DECK. HE WA SUSING A 1/2 IN X 4 IN LONG PIECE OF PIPE TO FORCE BAR RUBBER IN P OSITION. PIPE SLIPPED AND END OF PIPE CAME UP AND HIT EMP IN 3THE MOUTH

November 17, 1987 NJ · Metal/Non-Metal SLIP OR FALL OF PERSON
George F Pettinos Inc · Fall onto or against objects

EMPLOYEE BECAME3INVOLVED IN ROUGH PLAY WITH ANOTHER EMPLOYEE, HE FELL AGAINST THE CORNER OF WORK TABLE AND STRUCK HIS HEAD.

November 6, 1987 NJ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
George F Pettinos Inc · Fall onto or against objects

EMPLOYEE AND FE5LOW EMPLOYEE WERE CARRYING A VIBRTOR TO THE AREA OF THE FEED HOPPER, PREPARING FOR THE INSTALLATION OF THE SAME. EMPLOYEE LOST HIS BALANCE AND STRUCK HIS SHOULDER AGAINST THE W ALL OF THE FEED3HOPPER.

October 28, 1987 NJ · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
George F Pettinos Inc · Fall onto or against objects

EMPLOYEE WAS CL3MBING UP THE STEPS TO ENTER THE CAB OF A 633 CAT SCRAPER WAGON. EMPLOYEE SAID HIS FOOT WAS WET AND HE SLIPPED ON THE STEPS.

October 19, 1987 NJ · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
George F Pettinos Inc · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE WAS BR9AKING UP AND DISLODGING LARGE CLAY LUMPS IN THE SYNTRON FEED BOS HIS RT FOOT WAS POISITIONED BETWEEN A CLAY LUMP AND A BAR IN THE SYNTRON FEED BOX A FELLOW EMPLOYEE ASSISTING I N THE BREAKING 6P OF THE LUMPS APPARENTLY PRESSURED THE LUMP AGAINST I.NAMES FOOT CAUSING IT TO BE PINCHED BETWEEN THE LUMP AND THE BAR

August 3, 1987 NJ · Metal/Non-Metal HANDLING OF MATERIALS
George F Pettinos Inc · Struck by... (Not Elsewhere Classified)

EMP WAS ASSISTI3G IN CLEANING OUT OF HEAD FEED BOX. A LARGE TREE STUMP HAD BEEN FED INTO THE BOX. WITH ASSISTANCE OF FELLWO EMP THEY HAD PLACED THE STUMP ON THE NEARBY WALKWAY, AS THEY START TO PUCH THE STU4P OVERBOARD, PART OF THE STUMP PROJECTING OUT HIT EMPLOYEE

July 24, 1987 NJ · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
George F Pettinos Inc · Fall from machine

EMPLOYEE AFTER 7LEANING OUT THE SIMPLICITY SCREEN HEAD BOX WAS PREPARING TO TURN ON A WATER VALVE.FELLOW EMPLOYEE WITHOUT WAITING FOR AN ALL CLEAR SIGNAL,TURNED ON THE POWER TO THE FFED BELT O N WHICH THE EMP5OYEE WAS STANDING AND CAUSED THE EMPLOYEE TO LOSE HIS BALANCE AND THREW HIM INTO THE FEED BOX.

July 18, 1987 NJ · Metal/Non-Metal HANDLING OF MATERIALS
George F Pettinos Inc · Struck by falling object

EMPLOYEE WAS LO5DING A 4'X12" PIECE OF H-BEAM INTO A BUCKET OF A FRONT END LOAER.AFTER THROWING THE METAL IN THE BUCKET, IT BOUNCED BACK AND DROPPED TO THE GROUND.

July 14, 1987 NJ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
George F Pettinos Inc · Struck by flying object

EMPLOYEE WAS RE4OVING A BOLT FROM A CABLE CLAMP WITH A RATCHET WRENCH.THE WRENCH SLIPPED OFF THE BOLT AND CAME UP AND HIT EMPLOYEE,STRIKING A FORNT TOOTH.

June 26, 1987 NJ · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
George F Pettinos Inc · Over-exertion in pulling or pushing objects

EMPL FREEING HA3DLE OF VISE AS HE PULLED ARM BACK HE FELT SHARP PAIN IN HIS BACK.

May 4, 1987 NJ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech STEPPING OR KNEELING ON OBJECT
George F Pettinos Inc · Struck against stationary object

EMPLOYEE WAS MO5ING A 6'X20' TABLE INPOSTION UNDER A HOIST TO MAKE REPAIRS ON A PULLEY. WHILE MOVING THE TABLE HE STEPPED ON A PIPE LAYING CLOSE BY AND HE LOST HIS FOOTING AND TWISTED HIS LEG.

April 30, 1987 NJ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
George F Pettinos Inc · Fall from scaffolds, walkways, platforms

EMPLOYEE WAS CU7TING A 10 INCH DIA PIPE WITH A TORCH STANDING ON A WALKWAY ABOUT 11 FT ABOVE GBRXX GROUND. PIPE WAS ON THE SAME LEVEL AS WALKWAY. EMPLOYEE HAD ALREADY CUT A SECTION AT A LOVER LEVEL. THE PIP9 SECTION WITH 1, INCH DIA VALVE ATTACHED STARTED MOVING TOWARDS EMPLOYEE AND THEN PLUNGED TO THE GROUND. EMPLOYEE REALIZING THE PIPE STARTED TO MOVE SIDESTEPPED ON THE WALKWAY,

April 24, 1987 NJ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
George F Pettinos Inc · Struck against a moving object

I.NAME WAS STOC5PILING CONCRETE SAND MATERIAL. HE LOOKED TO THE LEFT & THE RIGHT, BUT NOT IN THE REAR. WHEN BACKING UP THE LOADER HE STRUCK A ARTICULATED DUMP TRUCK THAT WAS PASSING BY ON TH E PLANT ROADWAY1 STOCKPILE IS APPROX 36' FROM ROADWAY

March 2, 1987 NJ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
George F Pettinos Inc · Contact with hot objects or substances

EMPLOYEE SITTIN1 ON AN I-BEAM,ATOP A STEEL STRUCTURE,USING AN ACETYLENE TORCH.CUTTING OUT PIECES OF STRUCTURE.EMPLOYEE'S FOOT SLIPPED AND KNOCKED ACETYLENE TORCH AGAINST HIS LEFT LEG.

February 18, 1987 NJ · Metal/Non-Metal ledgeman/hand, quarry man HANDLING OF MATERIALS
George F Pettinos Inc · Struck by flying object

EMPLOYEE WORKIN1 ON THE DISMANTLING OF STEEL STRUCTURE. FOREIGN OBJECT FLEW INTO EMPLOYEE'S LEFT EYE.

1986 · 5 incidents

October 6, 1986 NJ · Metal/Non-Metal HANDTOOLS (NONPOWERED)
George F Pettinos Inc · Struck by... (Not Elsewhere Classified)

EE WAS HOLDING 5 4'X3' PIECE OF LINATEX WHILE ANOTHER EE WAS CUTTING OUT A PIECE OF LIATEX FOR CHUTE LINING. THE KNIFE SLIPPED FROM EES HAND & LANDED ON EES AHND.

August 25, 1986 NJ · Metal/Non-Metal backhoe operator, trackhoe operator HANDLING OF MATERIALS
George F Pettinos Inc · Over-exertion (Not Elsewhere Classified)

EMPL ASSTING IN3REMOVAL AND INSTALLATION OF SET OF CONVEYOR ROLLERS ON ASPHALT HORIZONTAL CONVEYOR.

July 30, 1986 NJ · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
George F Pettinos Inc · Struck against a moving object

FOUR SCRAPERS W5GONS WERE TRAVELING THE PLANT HAUL ROAD, 3 WERE GOING NORTH, ONE GOING SOUTH. THE THIRD SCRAPER SIDESWIPED THE ONE SCRAPER TRAVELING SOUTH. CONDITIONS AT TIME WERE DUSTY BECAUS E OF HEAVY EQUI1MENT RAISING THE DUST. THE THREWW SCRAPER WAGONS TRAVELING NORTH WERE OUTSIDE CONTRACTOR.

May 2, 1986 NJ · Metal/Non-Metal HANDLING OF MATERIALS
George F Pettinos Inc · Caught in, under or between a moving and a stationary object

EMP WAS ASSISTI3G IN REMOVING A P12438HE25 BEND PULLEY AFTER REMVOING THE BOLTS EMP WAS PULLING THE BEND PULLEY FROM THE CONVEYOR FRAME BY GRASPING THE BEARING END OF THE PULLEY THE PULLEY DRO DROPPED SUDDENL2 AND PINNED EMPLOYEES LEFT HAND AGAINST THE FRAME AND BEARING OF BEND PULLEY

1985 · 2 incidents

September 7, 1985 NJ · Metal/Non-Metal HANDLING OF MATERIALS
George F Pettinos Inc · Struck by... (Not Elsewhere Classified)

TWO EMPLOYEES, I.NAME & I. NAME 2 WERE CLOSING THE PLANT GATE. I.NAME WAS PROPELLING THE PIPE STYLE GATE BY WALKING & PUSHING WITH HIS BACK NEXT TO THE GATE. I.NAME 2 WAS BENDING OVER PICKING UP THE CHAIN & LOCK T O SECURE THE GATE. AS THE GATE WAS CLOSING IT STRUCK I,NAME 2

February 1, 1985 NJ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator OTHER
George F Pettinos Inc · Struck by flying object

OPERATOR WAS STOCKPILING USING A FRONT END LOADER, WIND HAD BEEN BLOWING AND PICKED UP SOME GRIT AND THE GRIT BLEW INTO OPERATORS RIGHT EYE AND THE EYE BECAME IRRITATED

1984 · 5 incidents

December 31, 1984 NJ · Metal/Non-Metal outside foreman, leadman SLIP OR FALL OF PERSON
George F Pettinos Inc · Fall to the walkway or working surface

EMPLOYEE WAS ASSISTING THE DREDGE OPERATOR IN THE LOADING OF A ROW WORK BOAT ON TO A \80 CHEV. PICK-UP TRUCK. I.NAME LOST HIS FOOTING ON THE UNEVEN GROUND.

November 23, 1984 NJ · Metal/Non-Metal superintendent MACHINERY
George F Pettinos Inc · Struck by flying object

EMPLOYEE WAS BURNING OFF BOLTS OF A 966 CAT FRONT END LOADER CUTTING EDGE. WHEN STARTING TO BURN OFF THE LAST BOLT, THE BOLT SNAPPED ANDTHE CUTTING EDGE FLEW OFF & STRUCK EMPLOYEE ON THE RIGHT FOOT.

November 20, 1984 NJ · Metal/Non-Metal HANDLING OF MATERIALS
George F Pettinos Inc · Over-exertion (Not Elsewhere Classified)

EMPLOYEE WAS TURNING THE V-BELTS OF A SHAFT ON A 66" SAND SCREW BY HAND TO GET TO BOLTS THAT WERE TO BE REMOVED FOR NEEDED REPAIRS. EMPLOYEE STRAINED HIS BACK IN SO DOING.

July 30, 1984 NJ · Metal/Non-Metal superintendent MACHINERY
George F Pettinos Inc · Contact with hot objects or substances

I NAME USING A CUTTING TORCH WAS CUTTING OFF A 18 DIA SHEAVE OFF A 3-7-16" SHAFT A PIECE OF HOT METAL OR SPARK FELL ON I NAME S LEG SHOE AND BURNED THROU ONTO HIS INSTEP.

June 28, 1984 NJ · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
George F Pettinos Inc · Fall from machine

EMPL ASSISTING INSTALLATION OF NEW SCREEN DECK FOR 48\\ X 12\ TRIPLE DECK VIBRATING SCREEN.FELLOW EMPL I.NAME SAW I.NAME FALL BUT DOESNT KNOW WHY HE FELL OR WHAT CAUSED HIT TO FALL. I.NAME FEL INTO RECEIVING HOPPER AT BASE OF SCREEN.