Mining Incidents

Colonel Hollow Mine: 31 MSHA citations Coal

Alden Resources LLC · Surface
Controlled by Ferroglobe PLC
Woodbine, Whitley County, KY  ·  Abandoned
MSHA Mine ID: 1519508

Colonel Hollow Mine has $29K in proposed MSHA penalties and $100 outstanding across 6 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Colonel Hollow Mine.

Fatalities
0
Total incidents
0
Years on record
Latest incident
Compliance record
MSHA citations since 2010
31
citations
17
significant & substantial
$28,846
proposed penalties
$17,718
paid to date
61% of proposed penalties paid to date, a $11,128 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2010
12
inspections on record
289
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 289 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Colonel Hollow Mine has $29K in proposed MSHA penalties and $100 outstanding across 6 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$29K
proposed penalties
$18K
current assessed
$18K
paid to date
$100
outstanding
31 assessments are final orders; 6 contested dockets.
Of $28K in penalties contested before the Commission, $17K was upheld in final decisions.
As of the most recent assessment on 2017-04-11.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
54.8%
significant & substantial
9.7%
high negligence or reckless
54.8%
reasonably likely or greater
19.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 90.3% moderate, 9.7% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
19 citations taken to the federal commission · 61% of citations on record
  • Settled 19 · 100%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 16 decided S&S contests · industry: 79%
40%
Penalty reduction in decided contests
$28K proposed, $17K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2017-06-14.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
KENT 2017-0273 Settlement Simonton 2018 $13K → $4K
KENT 2017-0274 Settlement Simonton 2018 $7K → $6K
KENT 2011-279 Settlement Lewis 2011 $3K → $3K
KENT 2011-167 Settlement Lewis 2012 $3K → $2K
KENT 2015-0227 Settlement Lesnick 2015 $1K → $960
KENT 2016-0007 Settlement Feldman 2016 $540 → $540
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

MSHA sampling at Colonel Hollow Mine shows 100% of 43 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2017-02-09, 9 years ago
100%
within 1.5 mg/m3
43
samples
1.50
dust max (mg/m3)
0
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
24 samples taken by MSHA inspectors, 19 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR22
  • HIGHWALL DRILL OPERATOR8
  • HIGHLIFT OPERATOR/FRONT END LOADER5

Silica (quartz)

Last sampled: 2015-06-11, 11 years ago
5.4
silica avg (%)
6
samples
9.5
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR2
  • HIGHWALL DRILL OPERATOR2
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE2

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2017-01-09, 9 years ago
6%
over PEL
18
samples
Most-sampled occupations
  • BULLDOZER OPERATOR5
  • HIGHLIFT OPERATOR/FRONT END LOADER4
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE4
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2017 100% 6
2016 100% 3
2015 100% 16
2014 100% 13
2010 100% 5
Silica (quartz) by year
Year silica avg (%) samples
2015 5.5 2
2014 3.3 2
2010 7.5 2
Noise by year
Year over PEL samples
2017 25% 4
2015 0% 4
2014 0% 5
2010 0% 5
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Colonel Hollow Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2015.

Injury rate, 2015
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 3.76 and the all-US-mining average was 2.72 cases per 100 workers.
In Kentucky, coal mining averaged 4.56 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Alden Resources LLC 2010 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2017 2
2016 2
2015 22 34,084
2014 14 9,815
2010 15 9,401
Source: MSHA quarterly employment and production, updated weekly.

Colonel Hollow Mine sits in Whitley County, Kentucky, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Whitley County, Kentucky · Population 36,755
0.0%
Mining share of county employment
$41,719
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2017 Q2 1,260 3 3 2381.0
2017 Q1 1,537 1 0 650.6
2016 Q4 753 0 0 0.0
2016 Q1 768 0 0 0.0
2015 Q4 6,512 0 0 0.0
2015 Q3 12,697 1 0 78.8
2015 Q2 13,999 0 0 0.0
2015 Q1 13,464 0 0 0.0
Show 4 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2014 Q4 12,768 2 0 156.6
2014 Q3 2,924 0 0 0.0
2010 Q4 829 0 0 0.0
2010 Q3 11,268 17 12 1508.7

No reportable incidents on file.

MSHA has no recorded reportable accidents for this mine in the current dataset. New reports appear here within a week of being filed.