Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← Back to search

Culver Mine: 18 MSHA citations Coal

Vinita, OK, Craig County, OK  ·  Abandoned
MSHA Mine ID: 3402094

Culver Mine has $4K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Culver Mine.

Fatalities
0
Total incidents
0
Years on record
—
Latest incident
—
Compliance record
MSHA citations since 2010
18
citations
8
significant & substantial
$3,898
proposed penalties
$3,898
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
See Phoenix Mining Company's full MSHA compliance history →
Inspection activity
MSHA inspections since 2010
6
inspections on record
266
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 266 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
ⓘ A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2011-03-22.
On record since 2011.
Source: MSHA imminent-danger order records, updated weekly.

Culver Mine has $4K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$4K
proposed penalties
$4K
current assessed
$4K
paid to date
$0
outstanding
17 assessments are final orders; 1 contested dockets.
Of $324 in penalties contested before the Commission, $324 was upheld in final decisions.
As of the most recent assessment on 2011-12-21.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
47.1%
significant & substantial
0.0%
high negligence or reckless
47.1%
reasonably likely or greater
17.6%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 35.3% low, 64.7% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘ Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2 citations taken to the federal commission · 11% of citations on record
  • Stood as issued 2 · 100%
100%
S&S designation survived the contest
ⓘ Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 2 decided S&S contests · industry: 79%
0%
Penalty reduction in decided contests
$324 proposed, $324 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2010-08-31.
Contested penalties
ⓘ A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2010-1188 Default Lesnick 2011 $324 → $324
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

MSHA sampling at Culver Mine shows 100% of 32 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2012-02-03, 14 years ago
100%
within 1.5 mg/m3
32
samples
1.17
dust max (mg/m3)
23 samples taken by MSHA inspectors, 9 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR14
  • HIGHLIFT OPERATOR/FRONT END LOADER9
  • COAL TRUCK DRIVER6

Silica (quartz)

Last sampled: 2010-08-03, 16 years ago
12.5
silica avg (%)
1
samples
12.5
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR1
See US coal mines ranked by silica in their dust samples.

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2011-12-21, 14 years ago
0%
over PEL
18
samples
Most-sampled occupations
  • HIGHLIFT OPERATOR/FRONT END LOADER6
  • COAL TRUCK DRIVER5
  • BULLDOZER OPERATOR3
See US mines ranked by noise samples over the legal limit.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2012 100% 7
2011 100% 13
2010 100% 12
Noise by year
Year over PEL samples
2011 0% 11
2010 0% 7
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Culver Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2011.

Injury rate, 2011
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 3.83 and the all-US-mining average was 3.08 cases per 100 workers.
In Oklahoma, coal mining averaged 3.75 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2011 * 0.00 0.00 0.000
2010 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Phoenix Mining Company 2009 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘ Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2012 5 4,769
2011 18 75,074
2010 13 43,696
Source: MSHA quarterly employment and production, updated weekly.

Culver Mine sits in Craig County, Oklahoma, where the Census mining category is 1.1% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Craig County, Oklahoma · Population 14,215
1.1%
Mining share of county employment
$50,182
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2012 Q3 0 0 0
2012 Q2 0 0 0
2012 Q1 11,349 0 0 0.0
2011 Q4 9,566 3 1 313.6
2011 Q3 10,327 3 0 290.5
2011 Q2 8,855 0 0 0.0
2011 Q1 11,169 3 2 268.6
2010 Q4 9,429 2 1 212.1
Show 3 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2010 Q3 3,344 0 0 0.0
2010 Q2 8,639 7 4 810.3
2010 Q1 1,549 0 0 0.0

No reportable incidents on file.

MSHA has no recorded reportable accidents for this mine in the current dataset. New reports appear here within a week of being filed.