Mining Incidents

Custer Mill: 93 MSHA citations Metal/Non-Metal

Pacer Corporation · Facility
Controlled by Steve Burns
Custer, Custer County, SD  ·  Abandoned
MSHA Mine ID: 3900428

Custer Mill has $23K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Custer Mill.

Fatalities
0
Total incidents
23
Years on record
1988–2018
Latest incident
Jun 2018
Compliance record
MSHA citations since 2000
93
citations
27
significant & substantial
$22,895
proposed penalties
$22,895
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
60
inspections on record
958
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 958 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2015-04-27.
On record since 2015.
Source: MSHA imminent-danger order records, updated weekly.

Custer Mill has $23K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$23K
proposed penalties
$23K
current assessed
$23K
paid to date
$0
outstanding
92 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2018-07-05.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
29.3%
significant & substantial
5.4%
high negligence or reckless
29.3%
reasonably likely or greater
60.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 2.2% low, 92.4% moderate, 5.4% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2017-06-09, 9 years ago
38%
of limit-tested samples over the exposure limit
26
samples
24
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz249 over
  • Fibers, >5um1
  • Respirable dust, <.1mg1
Show the individual readings (26)
Date Contaminant Concentration Limit Conc / limit Occupation
2017-03-03 Quartz, respirable, >1% Qtz 5.68 0.71 8.00 Ball Mill Operator
2009-09-29 Quartz, respirable, >1% Qtz 0.94 0.82 1.15 Cleanup Man
2008-08-06 Quartz, respirable, >1% Qtz 0.78 0.74 1.05 Dry Screen Plant Operator
2007-09-12 Quartz, respirable, >1% Qtz 1.31 0.67 1.96 Ball Mill Operator
2007-09-12 Quartz, respirable, >1% Qtz 1.76 0.69 2.55 Bagging Operator
2007-09-12 Quartz, respirable, >1% Qtz 1.77 1.41 1.26 Bagging Operator
2007-01-04 Quartz, respirable, >1% Qtz 0.93 0.72 1.29 Bagging Operator
2005-10-20 Quartz, respirable, >1% Qtz 1.1 0.91 1.21 Bagging Operator
2005-06-16 Quartz, respirable, >1% Qtz 0.85 0.74 1.15 Ball Mill Operator
2017-06-09 Quartz, respirable, >1% Qtz 0.68 0.7 0.97 Ball Mill Operator
2017-04-18 Fibers, >5um 0.11 Laborer, Bullgang
2017-03-03 Quartz, respirable, >1% Qtz 0.59 0.67 0.88 Ball Mill Operator
2010-02-23 Quartz, respirable, >1% Qtz 0.46 0.72 0.64 Ball Mill Operator
2010-02-23 Quartz, respirable, >1% Qtz 0.62 0.8 0.78 Dry Screen Plant Operator
2010-02-23 Quartz, respirable, >1% Qtz 0.47 0.84 0.56 Cleanup Man
2010-02-23 Quartz, respirable, >1% Qtz 0.32 0.91 0.35 Ball Mill Operator
2009-09-29 Quartz, respirable, >1% Qtz 0.3 0.84 0.36 Crusher Oper/Worker
2008-08-06 Quartz, respirable, >1% Qtz 0.36 0.73 0.49 Warehouse Man
2007-12-19 Quartz, respirable, >1% Qtz 0.34 0.77 0.44 Bagging Operator
2007-12-19 Quartz, respirable, >1% Qtz 0.21 0.72 0.29 Ball Mill Operator
2007-01-04 Quartz, respirable, >1% Qtz 0.7 0.84 0.83 Ball Mill Operator
2006-02-16 Quartz, respirable, >1% Qtz 0.78 1.03 0.76 Ball Mill Operator
2006-02-16 Respirable dust, <.1mg 0 Supervisor, Co. Official
2006-02-16 Quartz, respirable, >1% Qtz 0.44 0.79 0.56 Bagging Operator
2005-10-20 Quartz, respirable, >1% Qtz 0.98 0.99 0.99 Bagging Operator
2004-06-03 Quartz, respirable, >1% Qtz 0.49 1.82 0.27 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Custer Mill recorded 0.00 reportable injury cases per 100 full-time workers in 2016.

Injury rate, 2016
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 2.17 and the all-US-mining average was 2.59 cases per 100 workers.
In South Dakota, metal and nonmetal mining averaged 4.95 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2016 * 0.00 0.00 0.000
2015 * 7.82 0.00 0.000
2014 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Pacer Corporation 1950 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2018 9
2017 11
2016 12
2015 13
2014 13
2013 11
2012 7
2011 5
2010 5
2009 5
2008 5
2007 5
2006 5
2005 6
2004 6
2003 6
2002 6
2001 6
2000 6
Source: MSHA quarterly employment and production, updated weekly.

Custer Mill sits in Custer County, South Dakota, where the Census mining category is 2.8% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Custer County, South Dakota · Population 8,686
2.8%
Mining share of county employment
$81,958
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2018 Q3 4,284 3 0 700.3
2018 Q2 3,459 0 0 0.0
2018 Q1 5,483 2 0 364.8
2017 Q4 3,455 0 0 0.0
2017 Q3 4,151 1 1 240.9
2017 Q2 4,261 0 0 0.0
2017 Q1 3,979 5 0 1256.6
2016 Q4 5,733 0 0 0.0
Show 67 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2016 Q3 6,623 0 0 0.0
2016 Q2 5,287 0 0 0.0
2016 Q1 4,182 5 2 1195.6
2015 Q4 5,714 4 1 700.0
2015 Q3 5,424 5 1 921.8
2015 Q2 7,249 1 0 138.0
2015 Q1 7,187 0 0 0.0
2014 Q4 6,989 5 1 715.4
2014 Q3 5,977 0 0 0.0
2014 Q2 6,867 0 0 0.0
2014 Q1 5,644 0 0 0.0
2013 Q4 6,661 3 1 450.4
2013 Q3 3,543 0 0 0.0
2013 Q2 5,108 0 0 0.0
2013 Q1 4,479 0 0 0.0
2012 Q4 4,417 2 0 452.8
2012 Q3 3,181 0 0 0.0
2012 Q2 3,708 3 3 809.1
2012 Q1 3,054 6 3 1964.6
2011 Q4 2,796 0 0 0.0
2011 Q3 2,408 1 0 415.3
2011 Q2 2,172 0 0 0.0
2011 Q1 1,974 4 1 2026.3
2010 Q4 2,108 0 0 0.0
2010 Q3 2,439 5 2 2050.0
2010 Q2 2,086 0 0 0.0
2010 Q1 2,239 0 0 0.0
2009 Q4 1,652 0 0 0.0
2009 Q3 2,079 2 1 962.0
2009 Q2 1,893 0 0 0.0
2009 Q1 2,398 0 0 0.0
2008 Q4 2,159 4 1 1852.7
2008 Q3 2,460 4 0 1626.0
2008 Q2 2,411 0 0 0.0
2008 Q1 2,634 6 2 2277.9
2007 Q4 2,308 2 1 866.6
2007 Q3 2,155 5 3 2320.2
2007 Q2 2,341 0 0 0.0
2007 Q1 2,442 1 0 409.5
2006 Q4 2,290 0 0 0.0
2006 Q3 2,026 0 0 0.0
2006 Q2 2,189 0 0 0.0
2006 Q1 2,026 0 0 0.0
2005 Q4 2,372 0 0 0.0
2005 Q3 3,002 0 0 0.0
2005 Q2 2,876 3 0 1043.1
2005 Q1 2,781 0 0 0.0
2004 Q4 2,402 0 0 0.0
2004 Q3 2,425 0 0 0.0
2004 Q2 2,638 0 0 0.0
2004 Q1 2,864 0 0 0.0
2003 Q4 2,457 1 0 407.0
2003 Q3 2,026 0 0 0.0
2003 Q2 2,436 0 0 0.0
2003 Q1 2,567 0 0 0.0
2002 Q4 2,824 0 0 0.0
2002 Q3 2,410 2 0 829.9
2002 Q2 2,838 0 0 0.0
2002 Q1 2,639 0 0 0.0
2001 Q4 3,050 0 0 0.0
2001 Q3 2,763 0 0 0.0
2001 Q2 2,888 0 0 0.0
2001 Q1 2,688 0 0 0.0
2000 Q4 2,642 0 0 0.0
2000 Q3 3,001 8 3 2665.8
2000 Q2 3,020 0 0 0.0
2000 Q1 2,935 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

23 on file

2018 · 1 incident

June 13, 2018 SD · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Pacer Corporation · Struck by flying object

EE was breaking jasper brick grinding media with a sledge hammer in order to obtain smaller pieces. EE busted a piece that flew up and cut middle finger on left hand. EE supervisor controlled the bleeding and took ee to the hospital where EE received two stitches.

2017 · 1 incident

August 11, 2017 SD · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Pacer Corporation · Over-exertion (Not Elsewhere Classified)

The operator was performing the task of placing a tarp over a shaker screen. EE was standing on a pedestal to access the screen. EE slipped while attempting to step down from the pedestal to the catwalk and hyperextended left knee. The operator went to the doctor at the end of the shift. Nothing was broken but EE was given a knee immobilizer and released to return to work.

2015 · 1 incident

June 25, 2015 SD · Metal/Non-Metal ball/rod/pebble/hand/limestone/dry mill operator, roller operator HANDLING OF MATERIALS
Pacer Corporation · Caught in, under or between a moving and a stationary object

Re-bricking mill and while placing bricks inside mill, he pinned right pinky finger between bricks and mill door

2013 · 3 incidents

December 31, 2013 SD · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
Pacer Corporation · Struck against stationary object

Employee attempting to bore a hole with a cordless drill when the drill bit broke causing employee to lurch forward at which point he cut the thumb of his free hand with the portion of drill bit still remaining in the drill.

October 21, 2013 SD · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Pacer Corporation · Fall to the walkway or working surface

On third level of plant, ran into a low clearance area, fell back and hit tail bone on catwalk.

April 29, 2013 SD · Metal/Non-Metal ledgeman/hand, quarry man HANDLING OF MATERIALS
Pacer Corporation · Struck by... (Not Elsewhere Classified)

Cleaning up the discharge blower chute on the Mill. EE attempted to empty the discharge flap, failed to notice a bunge cord that was securing the flap closed and pushed the flap open which caused the bunge cord to break and slip free from the flap striking EE in the lower nose and upper lip area.

2008 · 1 incident

September 24, 2008 SD · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Pacer Corporation · Over-exertion in lifting objects

Strained/pulled muscles in lower back while emptying 50 lb bags of product. Went to Custer Regional Medical Emergency Room, Custer, SD.

2003 · 1 incident

May 1, 2003 SD · Metal/Non-Metal mine manager, mine foreman, mine owner HANDLING OF MATERIALS
Pacer Corporation · Over-exertion in pulling or pushing objects

EE WAS AT THE EXPLOSIVES MAGAZINE. HE WAS TRYING TO OPEN A JAMMED DOOR (THE WOOD ON THE BACK OF THE DOOR EXPANDED DUE TO MOISTURE). HE STRAINED HIS LOWER BACK. HE REPORTED THE INCIDENT BUT DID NOT SEEK TREATMENT. ON 5/22 HE WAS BARRING ORE IN THE CRUSHER PIT AND REINJURED HIS BACK. HE IS NOW BEING TREATED BY A CHIROPRACTOR & MAY BE SCHEDULED FOR FURTHER MEDICAL TREATMENT.

2001 · 1 incident

December 5, 2001 SD · Metal/Non-Metal mine manager, mine foreman, mine owner HANDLING OF MATERIALS
Pacer Corporation · Over-exertion in lifting objects

BENT TO SLIDE AND LIFT A BOX OUT OF A VEHICLE AND PULL OR STRAINED BACK MUSCLES. PROGRESSIVELY GOT WORSE BY NEXT DAY. HE MISSED NO TIME OFF WORK. HE WENT TO LAMMERS CHIROPRACTIC CLINIC ON 12/6 /01, 12/7/01 AND 12/10/01.

2000 · 1 incident

September 25, 2000 SD · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator OTHER
Pacer Corporation · Struck by flying object

EE WAS WALKING ACROSS PLANT AREA. WIND BLEW A FOREIGN OBJECT INTO HIS RIGHT EYE. IT DID NOT BOTHER HIM UNTIL LATER IN THE EVENING AT WHICH TIME HE WENT TO THE EMERGENCY ROOM AT THE CUSTER HOSP ITAL. HE MISSED NO TIME OFF WORK AND RETURNED TOWORK THE NEXT DAY AT THE BEGINNING OF HIS SHIFT. HE WAS WEARING SAFETY GLASSES AT THE TIME OF THE ACCIDENT.

1997 · 1 incident

June 9, 1997 SD · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Pacer Corporation · Over-exertion (Not Elsewhere Classified)

EE WAS LOADING 50 LB BAGS OF FELDSPAR. HE BENT OVER THE HELP FOLD A TARP THAT WAS COVERING THE MATERIAL AND PULLED THE MUSCLES IN HIS LOWER BACK.

1995 · 4 incidents

August 22, 1995 SD · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Pacer Corporation · Fall down stairs

EE WALKING DOWN THE STEPS OF A STAIRWAY ON THE SOUTHEND OF THE FELDSPAR PLANT. HE SLIPPED ON THE LAST STEP AND SPRAINED HIS LEFT ANKLE. EE WENT TO URGENT CARE CLINIC IN CUSTER AND HAD HIS ANKL E X-RAYED. IT IS JUST A BAD SPRAIN.

August 22, 1995 SD · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
Pacer Corporation · Struck by flying object

EE WAS PICKING DENTAL SPAR FROM A PICKING BELT. ROCK IS FED INTO A HOPPER TO FEED THE PICKING BELT. A LARGE ROCK BOUNCED OFF THE PICKING BELT AND HIT EE IN THE LEFT LEG. EE WENT TO THE URGENT CARE CLINIC IN CUSTER WHERE THE LEG WAS X-RAYED.OFF UNTIL 8-28-95.

May 19, 1995 SD · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Pacer Corporation · Fall onto or against objects

EMPLOYEE WAS WORKING ON SHAKER SCREEN. IT STARTED TO HAIL AND THE WORK AREA BECAME SLIPPERY VERY QUICKLY. EMPLOYEE SLIPPED ON THE PLATFORM AND HIT HIS LEFT KNEE ON A STEEL BEAM. THE KNEE SWELL ED UP. HE WENT TO THE URGENT CARE CLINIC IN CUSTER AND WAS INFORMED TO WEAR A BRACE AND STAY OFF IT FOR A FEW DAYS. HE WORKS PARTTIME AND HIS NEXT SCHEDULED WORK DAY IS 5-24-95. HE MAY NOT MI

May 15, 1995 SD · Metal/Non-Metal belt foreman, maintenance foreman, maintenance supervisor MACHINERY
Pacer Corporation · Struck by flying object

EE WAS WELDING METAL. THE COMEALONG HOOKED TO THE METAL CAME LOOSE & HIT THE WELDING HOOD CAUSING THE SHIELD TO BREAK. GLASS GOT IN EE'S RIGHT EYE. FIRST AID WAS ADMINISTERED AT SITE. EE THEN WENT TO THE ER ATA THE CUSTER COMMUNITY HOSPITAL. EE WILL BE OFF WORK 1-2 DAYS.

1994 · 1 incident

September 20, 1994 SD · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Pacer Corporation · Absorption of radiations, caustics, toxic and noxious substances

EMPLOYEE WAS LAYING BRICK ON INSIDE OF BALL MILL AT THE FELDSPAR PLANT HE KNEELED PART OF THE TIME TO DO THIS ACTIVITY HE RECEIVED CONCRETE BURNS ON HIS KNEES EMPLOYEE VISITED THE CLINIC IN CU STER ONE TIME & RECEIVED FIRST AID & MEDICATION 09-23-94 HAD A RECHECK AT CLINIC ON 09-26-94

1993 · 1 incident

July 21, 1993 SD · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Pacer Corporation · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS CUTTING OPEN A TUBE OF SILICONE. RAZOR BLADE SLIPPED AND CUT LEFT THUMB. LEFT THUMB REQUIRED SUTURES. SUTURES GIVEN AT FAMILY HEALTH CARE CLINIC. NO LOST TIME.

1991 · 1 incident

June 18, 1991 SD · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Pacer Corporation · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS CHANGING A TIRE ON A 930 LOADER.EMPLOYEE WAS USING A BAR TO PRY THE NUTS LOOSE ON THE TIRE.A NUT CAME LOOSE QUICKER THAN EXPECTED AND THE BAR SLIPPED,CAME BACK AND HIT THE EMPLOYE E ON THE LEFT SHOULDER AND CHEST AREA.DR DIAGNOSED A MUSCLE STRAIN AND ADVISED EMPLOYEE TO REST SHOULDER FOR REMAINDER OF THE WEEK.HE COULD RETURN TO WORK ON06-24-91.

1990 · 2 incidents

August 30, 1990 SD · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Pacer Corporation · Struck by falling object

EMPLOYEE WAS TRYING TO REMOVE A PIECE OF FELDSPAR FROM A GATE IN THE CRUSHER PIT.HE SLIPPED FROM THE RAILING HE WAS STANDING ON CAUSING ANOTHER PIECE OF FELDSPAR TO ROLL DOWN FROM THE PILE.THI S ROLLING PIECE OF ORE HIT HIS RIGHT KNEE.EMPLOYEE MISSED 1/2 DAY OF WORK AND DID NOT SEE A PHYSICIAN.

January 26, 1990 SD · Metal/Non-Metal welder (shop) MACHINERY
Pacer Corporation · Struck by falling object

EMPLOYEE WAS WELDING DCOORS FOR THE SILO AUGER. THE DOOR SHE WAS WELDING WAS LOCATED ON A TABLE. THE DOOR PLATE FELL OFF THE TABLE AND LANDED ON HER RIGHT FOOT.

1989 · 1 incident

August 3, 1989 SD · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Pacer Corporation · Over-exertion (Not Elsewhere Classified)

EE WAS CARRYING A BUCKFUL OF GRINDING MEDIA TO PLACE IN THE MILL AND SLIPPED. IN THE PROCESS OF CATCHING HIS BALANCE, THE BUCKET PLACED A STRAIN ON HIS UPPER RIGHT LEG. ACCORDING TO DR STEVEN FISHER I NAME DEVELOPED A SYMPOTMATIC INGUINAL HERNIA.

1988 · 2 incidents

August 29, 1988 SD · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Pacer Corporation · Fall onto or against objects

EMPLOYEE WAS CARRYING A PIECE OF PIPE, TRIPPED AND FELL ON A PIECE OF ANGLE IRON.

August 15, 1988 SD · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator NONPOWERED HAULAGE
Pacer Corporation · Over-exertion in lifting objects

EMPLOYEE WAS CLEANING OUT MILL. HE BENT TO PICK UP A WHEELBARROW FULL OF MATERIAL, COULD NOT STAND UP STRAIGHT DUE TO LOW CEILING AND PULLED MUSCLE IN BACK.