DELL RAPIDS EAST QUARRY: 152 MSHA citations Metal/Non-Metal

Employee was washing out under the cone crusher to prepare for maintenance. While performing the task, employee slipped and fell landing on EE's ribs. Was seen at local ER and prescribed pain medicine. Was able to return to work with zero restrictions.

Cable and hook was wedged between two rollers. Miner pulled the cable out and the hook struck EE in the mouth resulting in a chipped tooth.

Employee was operating the 345 excavator clearing in front of the face. The bucket dropped off a ledge causing the machine to jar. The shudder of the machine resulted in the operator hurting their lower back. Was seen by medical professional who restricted them to resting for one week.

Employee bent over to open a bag of mansand to empty it out. When EE straightened their back they felt a pop. Injury is a result of ergonomic nature. Employee initially injured back on 10/08/2024 and has been trying to care for injury at home. Activities completed on 11/22/2024 aggravated the injury. Employee went in to ER on 11/24/2024 & was kept overnight for treatment to back.

Miner was dismounting equipment and tripped landing on the ground, knees first. Was placed on restrictions and physical therapy.

The Employee informed us has Dust Disease of the Lungs (Pneumoconiosis) - Silicosis.

Driller was climbing into the cab of the drill, which was parked at a slight angle, when the door swung shut pinching a fingers on left hand causing a laceration.

Iron worker was tied off on a beam with a retractable lanyard. Walking when lanyard suddenly locked. This caused the worker to fall onto surface of the beam in an awkward position. They received a contusion to the right side of their back.

Employee was moving rock around and out of a 7' standard crusher after it had plugged. Rock shifted and pinched finger between rock and metal cone.

EE was using a boring bar and cut left finger.

While unloading acetylene tank from truck the tank slipped and fell on EE's finger causing a fracture.

Lifting a gas tank into the back of the pickup.

EE had just used a razor knife to cut one piece of rubber and had begun installing it while IE measured out and began to cut the second strip. The knife slipped and cut through the leather glove, into IE's wrist.

EE was unhooking chains attached to an item that had been picked and set in place by the crane. As EE was pulling the chains, EE said EE felt a strain in EE's back. EE's back was sore and stayed home to rest for two days following the incident before going to the clinic.

Using a sledge hammer to break apart rocks that were lodged in the grizzly rails

EE was going up the stairway and EE scraped finger, on the top behind the fingernail, but did not think it was serious and did not report the injury at that time.

Lifting a turbo using an A frame hoist, while picking up the shut felt a pain in EE's arm.

Adjusting nut on crusher tramp release cylinder bolts. Trying to loosen net and felt a pain in arm.

Walking and twisted knee.

Two employees were lifting a piece of garbage metal approximately 80LBS off a service truck while doing this employee felt a pulled a muscle in stomach which then became a hernia

Employee was torching a steel plate on the Return Deister deck. This area has a 2 deck screen bed where screens are changed out weekly/bi weekly when worn. Torching and welding when needed. Conditions were windy that day and while torching a piece of slag went into employees ear. Plant was down for maintenance and all PPE was worn.

Employee was carrying a piece of steel 4ftx2ftx3/8 thick up a flight of stairs. EE turned on the landing of the stairs and felt like ee may have pulled a muscle. EE wasn't too concerned about it at that time. EE texted the next day that EE couldn't put any pressure on leg.

A flat rock approx 6" wide and 20" long bridged across the step box end. The employee attempted to dislodge the rocks. EE's left hand was struck by a rock from up above in the chute. The natural reaction was to pull EE's and back which caused the fall. There was no property damage.

Repair work was being done to an HP400 Crusher. EE was working inside crusher cavity and climbed out to help work on the top side. While climbing out EE felt a pull/prick on left side of EE's lower back and leg

Doing mainframe liner change hit left knee on cateye when moving to climb out of crusher

Unbinding the chains that had the front of the CAT 345 secured. Chain was tight so a bar was used to loosen the binder. When loosening the binder, it turned and employee was struck in the right check causing a laceration.

The employee was removing a u-clamp from a vehicle when his finger was pinched between impact and jack stand. He was taken to a clinic and had two stitches placed in his finger.

Repetitive use of hand tools and air tools and heavy lifting have resulted in bilateral carpal tunnel syndrome.

Reinstalling a truck set under a railcar - when pushing on wheel received a steel sliver in the palm of left hand.

Employee was lifting metal up on a screen bed. As he was lifting the metal, he pinched his finger between the metal in his hand and an I-beam for the deck above.

Employee was bent over pounding out screens with a 5 pound hammer. When he stood up, he felt pain in his lower back.

Driving 35 ton haul truck and as he drove, his back became stiff and eventually went into spasms and became sore.

Employee performing maintenance on screen bed and went to dismount and feet caught on air line and he lost his balance and fell.

Heat Exhaustion and Dehydration

Cutting a piece of expanded metal and cut right knee.

Torching metal and in doing so, slag splattered and got behind his safety glasses and went in eye.

Employee was torching bolts off of the discharge plate of a screen bed. There was built up pressure between the plate and screen causing the plate to pop off, hitting him in the right forearm, causing a laceration.

Changing screens on the west 3D screen.

Retreiving parts from upstairs and when turned to leave, tripped over a box and fell on a piece of steel and busted face open.

Kneeling down, setting up wheel lathe and went to stand up and had pain in right leg. Wasn't able to put any weight on it.

Changing a screen on 3D Deister and screen fell down on palm of right hand.

Loosening bolts on guard to check for oil leak and turned bolts to far and guard fell off pinning elbow between the plate and ground.

Helping put back screen plate and the plate got stuck and while trying to move the plate, it shifted and smashed his ring finger on the right hand.

Rubbed metal partical from hand or face into right eye.

Pulling metal shavings away from wheel on locomotive and one of the shavings cut through glove and cut finger tip.

A spec of welding slag in right eye while welding.

Strained right knee while putting oil in 50 ton Cat truck

Hit tip of right ring finger with hammer while lining up a bolt hole.

Caught a spark in the eye.

Squatted down in short cab to check sanding valve and when stood up there was extreme pain in the right knee

Right knee injured when working on jaw crusher in primary.

Walking past angle iron and hit knee against it.

PUTTING ON RUBBER BOOTS TO BEGIN WORK OUTSIDE.

Employee was climbing down a ladder and his knee popped.

EMPLOYEE FELL THROUGH AN ACCESS DOOR THAT WASN'T PROPERLY SECURED.

EMPLOYEE WAS TRYING TO OPEN A WATER VALVE WITH A PIPE WRENCH AND WRENCHED BACK.

Worker was pulling on a tube for the rolling rock box, when his hand slipped and his little finger went under one of the rollers.

Small puncture wound on right forearm due to contact with a sharp object.

Moving railroad ties, saw a splinter, went to remove splinter of wood when a tie slipped and cut skin of finger.

CUT TO RIGHT INDEX FINGER; FINGER PINCHED BETWEEN COME ALONG CHAIN AND HEAD PULLEY GUARD.

CLEANING OUT THE GRIZZLY SHE PINCHED HER FINGERS BETWEEN TWO ROCKS.

Head of hammer broke off and bounced off a belt and struck employee above the left eye.

Employee was allegedly shoveling rock in tunnel from floor on to belt and developed a hernia.

EMPLOYEE WAS ALLEGEDLY GETTING ROCKS OUT OF THE TAIL PULLEY OF A RAILCAR.

Electrical cable at entrance interior walls burned.

EE WAS WELDING ON A CONVEYOR IN A TUNNEL. WHEN FINISHED, EYES BEGAN TO HURT AT THE END OF THE DAY

EMPLOYEE WAS HOLDING A BAR TO BREAK UP FROZEN MATERIAL WHEN ANOTHER EMPLOYEE HIT THE BAR WITH A HAMMER. THE HAMMER HIT THE EMPLOYEE'S FINGER REQUIRING STITCHES.

EE ALLEGEDLY SLIPPED ON ICY STEP ON THE LOCOMOTIVE AND PULLED HIS SHOULDER WHILE TRYING TO HANG ON TO THE HAND RAIL. ON FEBRUARY 20, 2004 EE HAD SURGERY ON HIS SHOULDER DUE TO THIS INJURY.

EE WAS CLEANING SNOW OUT OF RAILROAD CARS WHEN HE COMPLAINED OF PULLED MUSCLES IN HIS LOWER BACK.

EE WAS CUTTING A BOLT WITH A CUTTING TORCH WHEN HIS FLANNEL SHIRT STARTED ON FIRE BURNING HIS STOMACH AND HAND.

EE INJURED RIGHT HAND WHEN THE PUMP HOUSING HOOKED TO A CHAIN TIPPED AS HE WAS UNLOADING IT AND HIS HAND HIT THE CRANE HOOK.

EE ALLEGES THAT WHILE CLEANING AND CLOSING RAILROAD CAR DOORS HE PULLED BACK MUSCLE.

EMPLOYEE WAS FOLDING UP A CONVEYER WHEN HE SLIPPED AND FELL ABOUT FOUR FEET TO THE DECK BRUISINGHIS LEG AND HIP. THE DOCTOR FELT THE EMPLOYEE JUST HAD BRUISES. NOW THE EMPLOYEE STARTED HAVING MORE PAIN SO THE DOCTOR PRESCRIBED NO WORK FOR ONE WEEK. FORST DAY OFF WORK WAS 1-7-02.

ON 3/16/01 EE SAID HE WAS GOING TO A DOCTOR FOR AN UNKOWN ARM PAIN NOT WORK RELATED. ON 3/21 HE CALLED HIS FOREMAN AND SAID HE HAD SURGERY ON HIS NECK BUT DID NOT KNOW WHEN HE COULD COME BACK TO WORK. ON 3/23 HE TALKED TO ANOTHER SUPERVISORAND SAID HE WOULD NOT BE PAID FOR HIS TIME OFF WORK SO HE WOULD NEE THIS INJURY TO BE WORKMAN'S COMP IN ORDER TO RECEIVE PAY.

EMPLOYEE PUSHED A HEX BELT INTO A HOLE AND HAD HIS FINGER BETWEEN THE HEX HEAD AND THE METAL WHEN THE NUT GOT TIGHTENED HIS FINGER GOT PINCHED.

EE WAS GETTING OUT OF THE HAUL TRUCK WHEN HE SAID HE TWISTED HIS LEFT KNEE AS HE TURNED AROUND TO CLIMB DOWN THE STEPS OF THE TRUCK. HE HAS HAD NO PROBLEMS UNTIL TODAY.

EMPLOYEE ALLEGES HE TWISTED HIS ANKLE WHEN HE STEPPED ON A ROCK.

THE EE ALLEGES THAT HE STEPPED DOWN FROM THE FRONT OF THE TRUCK ONTO HIS LEFT FOOT, ROLLING HIS ANKLE.

EE CUT HIS HAND ON BANDING WHILE HE WAS BANDING ROCK ON PALLETS. THE BANDING MACHINE HAD PLUGGED BY A BEND IN THE BANDING.

EE ALLEGES LOWER BACK MUSCLE SPASMS DUE TO LIFTING & MOVING INSULATED TARPS INTO A VAN

THIS EMPLOYEE WAS GRINDING METAL AND HE HAD GLASSES AND A SHIELD ON. SOME FOREIGN MATERIAL ALLEGEDLY GOT INTO HIS EYE, BUT HE DID NOT NOTICE IT UNTIL HE GOT HOME AFTER WORK.

EE ALLEGEDLY BUMPED HIS RIGHT ELBOW ON AN OXYGENTANK AND HIS ELBOW PUFFED UP

FLASH BURN TO HIS EYE WHILE WELDING.

A ROCK WAS ON THE CANOPEE OF THE TRUCK SHE WAS DRIVING. THE ROCK FELL OFF THE CANOPEE HITTING THE MIRROR & A SMALL PIECE BROKE OFF HITTING HER IN THE SIDE OF THE HEAD.

THE EMPLOYEE STEPPED ON A CHROME BUMPER OF A TRUCK. HE SLIPPED AND FELL 2 FEET LANDING ON THE CONCRETE FLOOR. HE DID NOT GO TO A DOCTOR UNTIL 3.26.98.

EMPLOYEE ALLEDGES THAT HE TRIED TO LIFT AN I-BEAM AND HE FELT A MUSCLE IN HIS BACK PULL.

EMP ALLEGES MUSCLE SPASMS IN LOWER BACK AND SHARP PAINS WHILE DRIVING TRUCK IN THE HOLE.

THE EMP HIT HIS HAMMER AGAINST A ROCK AND ROCK CHIPS WENT INTO HIS EYES. EMP WAS ISSUED SAFETY GLASSES BUT WAS NOT WEARING THEM.

THE EMPLOYEE STOOD UP UNDER LOADER AND CUT HIS FOREHEAD ON THE FENDER.

EE IS A PLANT DRIVER WHO TRIED TO SO SOME WELDING DURING SOME DOWN TIME AND APPARENTLY GOT FLASH BURNS TO HIS EYES.

EE WAS DIGGING OUT FLAT ROCKS UNDER THE JAW AND A ROCK SLID DOWN AND HIT HIM ON HIS FOOT AND ANKLE

EMP WAS LEANING AGAINST A BIN AND THE BIN SHIFTED TO THE SIDE WHENT HE EMP SHIFTED HIS WEIGHT TOUNHOOK A CHAIN AND THE EMP FELL OFF THE BIN TO THE GROUND.

EMPLOYEE WAS TAKING ROUND STOCK OUT OF THE BANDSAW. ONE END FELL OFF THE STAND AND LANDED ON HIS RIGHT FOOT.

ANOTHER EE WAS MOVING A BLNAK ON THE E1 JAY DECK AND NONE OF THE TWO EE NOTICED A CENTER STRAP BEHIND IT. THE STRAP FELL OFF THE DECK HITTING EE BRUISING HIS RIBS.

EMPLOYEE WAS SERVICING A LOCOMOTIVE WHEN HE ALLEGEDLY OBTAINED A SORE BACK.

EE CLAIMS HE PLACED A FRAME ON A STAND AND WHEN HE TOOK PART OF THE FRAME OFF, THE OTHER PART MOVED AND PUSHED HIM BACKWARDS AND LANDING ON HIS BUTT. HE DID NOT REPORT THIS INJURY OR SEE A DR UNTIL NO. 21. AS HE FELT HE WAS NOT INJURED. THIS WAS TURNED IN TO THID GROUND INSURANCE WHO PAID THE CLAIM. NOW THE EE AND DR SAY THIS COULD BE WORK RELATED SO IT IS BEING TRANSFERRED TO W.C

EMPLOYEE WAS USING THE GRINDING WHEEL AND THE STONE BROKE CUTTING HIS FINGER.

EE WAS PULLING ON A ROD UNDER A LOCOMOTIVE AND HE BRACED HIMSELF BY HIS CHEST.

EMPLOYEE WAS UNPLUGGING THE CRUSHER WHEN HE SLIPPED & BRUISED HIS RIBS

THE EMPLOYEE WAS PICKING UP METAL AND HE SQUEEZED HIS FINGER BETWEEN THE PIECE OF METAL RESULTING IN A BROKEN FINGER.

EE JUMPED OFF THE OMNICONE DECK AND HE TWISTED HIS KNEE WHEN HE LANDED ON THE GROUND.

THE PIPE WRENCH THE EMPLOYEE WAS USING SLIPPED ON THE MAIN SHAFT CAUSING THE EMPLOYEE TO FALL AGAINST THE PUMP HOUSING RESULTING IN CUTTING HIS RIGHT EYE.

INJURED WAS HOLDING A METAL PLATE WHILE ANOTHER EMPLOYEE WAS POUNDING OUT A BUSHING THE OTHER EMPLOYEE'S HAMMER GLANCED OFF THE PIN AND CRUSHER FRAME STRIKING HIM IN THE HEAD.

EMPLOYEE WAS GRINDING ON A BRAKE BEAM AND THE GRINDER SLIPPED AND CUT HIS LEG ABOVE THE KNEE.

THE EMPLOYEE WAS CLEANING OUT THE GRIZZLEY & A ROCK FELL & HIT HIM ON THE SIDE OF THE KNEE HE WENT TO THE DOC & CAME RT BACK TO WORK NO PROBLEMS NO RESTRICTIONS

EMPLOYEE WAS AIR ARCING OFF THE NUTS ON CRUSHER BOLTS. HE DID NOT REALIZE TILL THE NEXT DAY THAT HE HAD FLASH BURNS ON HIS EYES.

THE EMPLOYEE WAS GUIDING A CABLE WHILE A F.E.L. WAS PULLING DOWN A PLANT CRUSHER. THE EMPLOYEE GOT CAUGHT BETWEEN THE MOVING CABLE & A STATIONARY OBJECT.

THE EE WAS CHECKING FOR FLAT SPOTS ON LOCOMOTIVE WHEELS. WHEN HE BENT OVER THE WIND BLEW METAL PIECES UNDER HIS SAFETY GLASSES INTO HIS EYES.

WHILE THE EMPLOYEE WAS CLIMBING ON THE CRUSHER HE SLIPPED & CUT HIS LEG HE DID NOT GO TO A DOC UNTIL FIVE DAYS LATER WHEN INFECTION SET IN

EE WAS LIFTING AN OXYGEN TANK TO PUT IT IN THE TRUCK. WHEN HE TURNED TO SET THE TANK DOWN HE GOT A MUSCLE SPASM AND PAIN IN HIS BACK AND RIGHT LEG.

THE EMPLOYEE WAS INSTLALING A MOTOR GUARD AND HE CUT TWO FINGERS THAT NEEDED STITCHES.

EMPL HOOKING CHAIN TOGETHER. AS EMPL PULLED BACK LOST BALANCE AND FELL 8'.

EMPLOYEE WAS CLIMBING OFF A CONVEYOR & HIT HIS LEG ON A STEEL PLATE

EMPLOYEE WAS TAKING A VIBRATOR OFF OF A CAR WHEN THE VIBRATOR SLIPPED AND THE EMPLOYEE TRIED TO CATCH IT AND PULLED A MUSCLE IN HIS LOWER BACK.

EMPLOYEE WAS LAYING UPSIDE DOWN USING A CUTTING TORCH ON A TRAIN CAR WHEN A SPARK FELL IN HIS EAR

38509NJURED EMPLOYEE AND A HELPER WERE SETTING A 55 GALLON BARREL ON A STAND WHEN THE INJURED EMPLOYEE ALLEGEDLY STRAINED HIS GROIN.

HOOKING UP STRINGER TO WELDER SAND CAVED WAY FELL DOWN HILL HIT WRIST CONCRETE PAD

THE EMPLOYEE WAS TRYING TO PRY A SCREEN IN PLACE WHEN THE PLIERS HE WAS USING SLIPPED AND HIT HIM INT HE CHEEK CUTTING HIS CHEEK.

EMPLOYEE WAS SAND BLASTING WHEN THE SANDBLASTER TIPPED OVER AND FELL ON HIS FOOT.

THE EMPLOYEE WAS MOVING A BEAN. THE HOIST WAS NOT CLOSE ENOUGH TO THE BEAM WHEN IT WAS CUT LOOSE, AND CUT THE EMPLOYEE ON HIS HEAD.

THE EMPLOYEE WAS GRINDING ON DRILL BITS WHEN A PIECE OF METAL BLEW BEHIND HIS FACE SHIELD AND GOT INTO HIS EYE. THE DOCTOR WASHED OUT HIS EYE.

EMPLOYEE WAS CUTTING BRICK GREASE. THE KNIFE SLIPPED AND HE CUT HIS FINGER.

EMPLOYEE WAS PLACING SAND FOR OVEN WHEN A CLUMP SLID DOWN THE PILE PINNING HIS HAND TO THE METAL SHEET AND BRUISING HIS HAND.

EMPLOYEE WAS CUTTING WITH A CUTTING TORCH WHEN A SPARK WENT INTO HIS EAR

EMPL WAS POUNDING ROCK OUT OF GRIZZLEY & WHEN HE STOOD UP HE TWISTED NECK.

EMPLOYEE WAS CLEANING SNOW OUT OF A RAILROAD CAR WHEN HE SLIPPED ON THE SNOW AND TWISTED HIS BACK AND PULLED MUSCLES IN HIS BACK.

EMPLOYEE WAS STANDING ON A STAIRS PAINTING AND FRAME TURNED AND EE SLIPPED AND FELL.

HELPING SET FEEDER BOX GOT THUMB WEDGED BETWEEN CONCRETE WALL AND TOOL

EMPLOYEE WAS TAKING A TOOTH OFF A 988 LOADER & HIS WRIST STARTED HURTING

EMPL DOING PRIMARY MAINTENANCE WHEN METAL STRAP BRLKE AND FELL 5' HITTING EMPL ON HEAD.EMPL WEARING HARD HAT.

EMPL SLEDGING PINS ON 5.5 CRUSHER OVEREXERTED MUSCLES PULLING HIP MUSCLE.

EMPL WAS WELDING ON SAND PLANT IN AWKWARD POSITION & HOT SPARK FLEW INTO EAR.

EMPL SLIPPED OFF COUNTER WEIGHT PULLING MUSCLE IN BACK. HE DID NOT GO TO DR UNTIL 7/15/91 & THEN MISSED TWO DAYS OF WORK ON 7/16/91 & 7/17/91.

CHIPPING HOT METAL CHIP FLEW IN EYE

DUST BLEW INTO EYE.WENT TO DR AND CAME BACK TO WORK.DIDNT TURN IN A DR REPORT STATING HE SHOULD TAKE TIME OFF,AND DID WORK OVER 40 HRS THAT WEEK. REPORTED THIS 6-28-91.

EMPLOYEE WAS INSPECTING AND REPAIRING THE CRUSHER WHEN HE STEPPED ON A SHARP EDGE OF A WIRE GUARD WHICH PUNCTURED HIS BOOT AND HIS FOOT.

WHILE REMOVING A CYLINDER FROM THE RACK, THE OPERATOR CROWDED OUT WITHOUT LOWERING THE CABLE. THE CYLINDER JERKED AND STRUCK HIS LEG AND BRUISED HIS LEG.

LIFTING HOIST ON BENCH, IT SLIP CAUGHT FINGER IN BETWEEN AND BROKE TIP OF MIDDLE FINGR

EMPLOYEE WAS GRINDING ON A LOCOMOTIVE WHEEL.THE GRINDER HIT ANOTHER PIECE OF METAL CAUSING THE GRINDER TO BOUNCE AND THE PIECE OF METAL TO FALL AND CUT HIS LEG ON THE INSIDE OF THE RIHGT KNEE.

EMPL SPOT RR CARS AT STOCKPILE TO BE LOADED.AFTER ALIGNING SWITCH WITH LOCOMOTIVE.8 RR CARS PULLED PAST SWITCH,TOLD ENGINEER TO BACK UP.I.NAME TO RIDE RR CAR WHILE SHOVELING BACK.WHEN LOCOMOTI VE REACHED SWITH,ENGINEER SAW I.NAME ALONG SIDE OF TRACK,BOTH LEGS WERE RUN OVER.

EMPL UNPLUGGING JAW,ROCK SLID HIT HAND CUTTING MIDDLE AND RING FINGERS ON RIGHT HAND.

EMPL DEVELOPED SORE BAFCK EITHER FROM LAYING ON ROCK & WELDING ON RAILROAD CAR OR FROM WAY HE SHAKES HEAD ATTEMPTING TO PUT WELDING HELMET DOWN OVER FACE BEFORE HE STARTS WELDING.

EMPLOYEE WAS SHOVELING FROM UNDER THE ROLLER BELT & CUT HIS FINGER ON THE BELT

EMPLOYEE WAS REPAIRING A SPRING BRAKE ON AN AUTOCAR TRUCK. HE DID NOT USE A TIE BOLT IN DISASSEMBLY. THE SPRING SPRUNG APART HITTING HIM ON HIS ARM, BREAKING HIS ARM.

EMPLOYEE WAS CLIMBING ON A RAILROAD CAR WHEN HE SLIPPED OFF & PULLED LIGAMENTS AT THE KNEE OF HIS LEFT LEG

EMPLOYEE WAS WERLDING A PIECE OF METAL ON THE PLANT WHEN ANOTHER PIECE OF METAL FELL OFF THE STACK AND HIT HIM ON THE HEAD.

EMPLOYEE WAS USING A PRY BAR TO CLOSE THE DOORS ON RAILROAD CARS. THE BAR SLIPPED AND HIT THE EMPLOYEE ON THE HEAD.

EMPLOYEE WAS WALKING ON AN I-BEAM AND HE SLIPPED AND FELL.

AS A CRANE WAS LOWERING A MOTOR ONTO THE BASE, THE EMPLOYEE REACHED IN TO GUIDE THE BOLT INTO THE HOLE. THE MOTOR WAS BINDING ON OTHER BOLTS AND WHEN IT LET LOOSE IT SMASHED HIS THUMB AND FIN GER.

EMPLOYEE WAS SLIDING THE DOOR UNDER THE RAILROAD CAR AND HE SMASHED HIS FINGER BETWEEN THE DOOR AND THE SIDE OF THE CAR.

EMPLOYEE WAS ADJUSTING JAW C RUSHER WITH FACTORY ADJUSTMENTS HE DID NOT HAVE THE HANDLE LOCKED IN THE SLOT BEFORE A SECOND EWMPLOYEE PUSHED DOWN CATCHING THE FIRST EMPLOYEES FINGER BETWEEN TH E HANDLE & THE FRAME

EMPL WAS HAMMERING ON AWRENCH WHEN HE PINCHED THE PALM OF HIS L HAND

EMPLOYEE WAS GETTING DOWN FROM A LADDER. HE STEPPED ON AN ELECTRICAL CORD PULLING A FAN OFF A SCAFFOLD. THE FAN HIT THE EMPLOYEE ON THE HEAD.

EMPLOYEE WAS CLEANING ROCK FROM THE GRIZZLEY BARS WHEN HE SLIPPED AND TWISTED HIS KNEE APPARENTLY A REOCCURENCE FROM HIS TWISTED KNEE ACCIDENT ON 10-1-87

EMPLOYEE WAS CHANGING AN EMPTY ACETYLENE BOTTLE FOR A FULL ONE WHEN THE WIND GUST BLEW THE DOOR AGAINST THE BOTTLE AS THE EMPLOYEE WAS MOVING THE BOTTLE, RESULTING IN A BROKEN THUMB.

EMPLOYEE WAS POUNDING A PICE OF METAL ON THE TRIALER WITH ABAR INSTEAD OF USING A HAMMER.THE BAR SLIPPED AND HIT HIM ON THE CHEEK,PUNCTURING HIS CHEEK.

EMPLOYEE WAS WALKING INTO THE SHOP STEAM ROOM AND A PRESSURE HOSE RUPTURED.THE EMPLOYEE RECEIVED MECHAINICAL BURNS ON HIS RIGHT HAND AND CHEST.

EMPLOYEE WAS POUNDING PINS IN CRUSHER WITH A SLEDGE HAMMER AND A ROCK FLEW OUT OF THE CRUSHER AND HIT HIM I N HIS EYE.

EMPLOYEE WAS PULLING ON A SHOVEL CABLE & HE SLIPPED ON LOOSE ROCK

EMPLOYEE WAS ATTEMPTING TO PRY A ROCK OUT OF THE JAW BAR SLIPPED & PINCHED ARM BETWEEN HAMMER & THE GATE AT THE JAW

EMPLOYEE WAS PO6NDING ON A PIECE OF HEATED METAL WITH A HAMMER AND A FOREIGN OBJECT HIT HIS TOOTH.

EMPLOYEE WAS R9PLACING BOLTS IN CRUSHER CAP WHEN CHAIN SLIPPED & THE BOLT DROPPED BREAKING A FINGER

EE WAS PUTTING 5 BOLT IN A GEAR BOX QHWN THE PRY BAR SLIPPED & HE HIT HIS FINGER ON T H E GEAR BOX.

EMPLOYEE WAS CH5NGING SCREENS ON THE HEWITT ROBINS EAST SECONDARY PLANT WHEN HE LOST HIS GRIP AND FELL BACKWARDS ONTO THE WEST SCREEN BRUISING HIS LEFT SHOULDER.

EMPLOYEE STEPPE8 OFF THE LADDER OF A CAT TRUCK, STEPPING ON A ROCK, TWISTING HIS KNEE AND PULLING LIGAMENTS.

EMP WAS TIGHTEN3NG BOLTS ON OMICONE LOCKING RING AND HIS WRENCH SLIPPED OFF AND MASHED HIS FINGER TIPS BETWEEN THE WRENCH AND LOCKING RING

EMPLOYEE WAS TR2ING TO HOOK A LIFTING CABLE TO THE CRNE WHEN THE END OF THE CABLE FLEW OFF AND HIT HIS HAND.

EMPLOYEE WAS PU5LING A CABLE INTO A SPLICING BOX AND HE PULLED THE LOWER BACK MUSCLES.

EMPLOYEE WAS TA5ING A VIBRATOR OFF OF A CAR WHEN THE VIBRATOR SLIPPED AND THE EMPLOYEE TRIED TO CATCH IT AND PULLED A MUSCLE IN HIS LOWER BACK.

EMPLOYEE WAS CH9CKING THE WIRING FOR GROUND ON THE LOCOMOTIVE. HE GOT AN ELECTRICAL SHOCK WHICH KNOCKED HIM OFF THE LOCOMOTIVE.

HE WAS CHECKIN1 THE RADIATOR FANS ON A LOCOMOTIVE WHEN HE SLIPPED OFF THE LOCOMOTIVE LANDING ON THE GROUND FEET FIRST PULLING THE MUSCLES IN HIS FEET

EMPLOYEE WAS AT7EMPTING TO LIFT THE COIL FRAME OUT OF THE FEEDER WHILE CHANGING A COIL ON THE SYNTRON FEEDER.

TWISTED WRONG W2ILE LIFTING SAND BAGS.

CLEANING OUT DU8T CONTROL,LIFTING TOO MUCH WEIGHT BY HIMSELF.

PICKING UP CUNK3OF STEEL CAUSING A HERNIA.

ACETYLENE BOTTL9 WAS FALLING IN BACK OF PICKUP HE REACHED FOR IT AND PULLED MUSCLE IN LOWER BACK

WHIEL STEPPING OUT OF LOADER, EMPLOYEE ALLEGEDLY STEPPED WRONG AND SPRAINED ANKLE.

EMP WAS SHARPENING BITS WHEN A SLIVER ALLEGEDLY FLEW OFF AND WENT INTO HIS EYE

EMPLOYEE WAS ALLEGEDLY CLOSING JOURNAL BOX DOOR ON RAILROAD CAR WHEN HIS BACK WENT OUT.

ROCK FELL DOWN STEP BOX AND ALLEGEDLY STRUCK EMPLOYEE ON LEG AND HIP CAUSING BRUISE. OPERATOR WS GIVEN SIGNAL TO START UP BELT AND FEEDER AND SHOULD NOT HAVE STARTED LONG 48 BELT.

EMPL HOLDING CUTTING EDGE BOLT IN LEFT HAND WHEN IT TURNED AND CUT HAND.

EMPLOYEE ALLEGES THAT WHILE LIFTING RAIL OUT OF LOADER BUCKET, HE RUPTURED DISC DUE TO SLIPPERY FOOTING.

EMP WAS WASHING UNDE BELT WITH HIGH PRESSURE HOSE WHEN HOSE GOT AWAY FROM HIM EMP RAN TO TURN IT OFF AND RAN INTO I BEAM

WHILE UNPLUGGING JAW CRUSHER, PLATE FELL AND HIT EMPLOYEE IN THE HIP

WHILE EMPLOYEE WAS PULLING ROCK RETARDER INTO PLACE, IT SLIPPED OUT OF ONE HAND AND HIT OTHER HAND.

WHILE WALKING THROUGH THE SHOP AWELDING CABLE WAS PULLED UP CAUSING EMPLOYEE TO TRIP

WHILE CUTTING HYDRAULIC HOSE WITH RAZOR, RAZOR SLIPPED AND CUT EMPLOYEE\S THUMB.

EMPLOYEE WAS PRYING A RAILROAD CAR DOOR SHUT AND HE USED ANOTHER BAR TO BEAT THE LATCH INTO PLACE. FIRST BAR FLEW OUT AND STRUCK EMPLOYEE.

WORKING AT QUARRY WALKING ACROSS THE PLANT AREA EMPLOYEE SLIPPED ON ROCKS AND HIT HIS KNEE.

EMPLOYEE WAS CLEANING A TORCH TIPWHEN THE TORCH TIP IGNITED AND BURNED HIS RIGHT HAND.

EE WAS TIGHTENING BOLTS ON THE F-900 SCREEN. THE SIDE PLATE SUDDENLY POPPED INTO PLACE CAUSING HIS WRENCH TO SLIP.

WHILE JUMPING OFF TRUCK, EMPLOYEE CAUGHT HIS FOOT AND FELL BRUISING HIS THIGH AND DAMAGING HIS KNEE AND HIP.

EMPLOYEE WAS HELPING TO FIX SPIKE PULLER. ONE END OF THE SPIKE PULLER WAS BEING LIFTED WITH FORK LIFT CAUSING HYDRAULIC RAM TO SLIDE DOWN RAIL STRIKING I.NAME ON THE HEAD.

SLIPPED OFF BUMPER OF TRUCK AND LANDED HARD ON GROUND.

SHAFT FELL OUT OF TURNING LATHE & HIT THUMB BETWEEN SHAFT & LATHE.

WHILE CARRYING HEAVY OBJECT EE PULLED MUSCLE AROUND HIS RIB CAGE.

SLIPPED ON STEP AND BRUISED KNEE.