Mining Incidents

DAYBOOK/FRANK MINE: 25 MSHA citations Metal/Non-Metal

Controlled by Wade C Hughes
Green Mountain, Yancey County, NC  ·  Abandoned
MSHA Mine ID: 3101568

DAYBOOK/FRANK MINE has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at DAYBOOK/FRANK MINE.

Fatalities
0
Total incidents
2
Years on record
1990–1995
Latest incident
Jan 1995
Compliance record
MSHA citations since 2000
25
citations
7
significant & substantial
$1,992
proposed penalties
$1,992
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
22
inspections on record
259
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 259 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

DAYBOOK/FRANK MINE has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$0
outstanding
25 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2006-03-08.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
28.0%
significant & substantial
0.0%
high negligence or reckless
28.0%
reasonably likely or greater
72.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 4.0% low, 96.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2006-03-08, 20 years ago
1
samples
0
limit-tested
Most sampled contaminants
  • Fibers, >5um1
Show the individual readings (1)
Date Contaminant Concentration Limit Conc / limit Occupation
2006-03-08 Fibers, >5um 0 Shovel Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. Mayland Stone Company Inc 1950 to 1999
  2. Grassy Creek Construction Company Inc 1999 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2006 5
2005 5
2004 6
2003 7
2002 6
2001 5
2000 7
Source: MSHA quarterly employment and production, updated weekly.

DAYBOOK/FRANK MINE sits in Yancey County, North Carolina, where the Census mining category is 0.7% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Yancey County, North Carolina · Population 18,676
0.7%
Mining share of county employment
$54,961
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2006 Q4 181 0 0 0.0
2006 Q3 196 0 0 0.0
2006 Q2 282 0 0 0.0
2006 Q1 356 6 2 16853.9
2005 Q4 272 0 0 0.0
2005 Q3 441 0 0 0.0
2005 Q2 256 0 0 0.0
2005 Q1 363 0 0 0.0
Show 20 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2004 Q4 357 0 0 0.0
2004 Q3 559 0 0 0.0
2004 Q2 362 0 0 0.0
2004 Q1 1,158 3 1 2590.7
2003 Q4 822 0 0 0.0
2003 Q3 1,225 0 0 0.0
2003 Q2 576 0 0 0.0
2003 Q1 851 4 2 4700.4
2002 Q4 504 0 0 0.0
2002 Q3 931 0 0 0.0
2002 Q2 1,035 0 0 0.0
2002 Q1 1,365 0 0 0.0
2001 Q4 1,432 4 1 2793.3
2001 Q3 1,567 3 1 1914.5
2001 Q2 2,588 0 0 0.0
2001 Q1 1,036 0 0 0.0
2000 Q4 2,615 0 0 0.0
2000 Q3 4,032 2 0 496.0
2000 Q2 3,187 0 0 0.0
2000 Q1 3,676 3 0 816.1
No fatalities recorded at this mine.

Reportable incidents

2 on file

1995 · 1 incident

January 27, 1995 NC · Metal/Non-Metal FIRE
Mayland Stone Company Inc · Contact with hot objects or substances

EE WAS USING A SHOVEL TO SLIDE A LIT BUCKET OF FUEL ACROSS THE HANDLE THAT CONTROLS THE GATE TO A MATERIAL STORAGE FACILITY WHEN THE HANDLE ON THE BUCKET BROKE THIS CAUSED THE FUEL TO SPILL ON EE LEFT LEG AT THIS TIME EE USED HIS RT HAND TOEXTINGUISH THE FIRE ON HIS LEGTHE ATTEMPT WAS FUTILESO HE RAN TO A SMALL PONT TO EXTINGUISH THE FIRE

1990 · 1 incident

August 3, 1990 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Mayland Stone Company Inc · Struck by falling object

ACCORDING TO THE CONTRACTOR, ONE OF THE MECHANICS DROPPED A HAMMER ON THE OTHER MECHANIC. ALL OF OUR EMPLOYEES WERE OFF DUTY AND NOT AT THE MINE SITE. THE CONTRACTOR WAS PERFORMING WARRANTY WO RK ON THE RUBBER TIRE LOADER THAT WE PURCHASED FROM THEM.