Dredge #6025 (Sandy K) has $10K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Dredge #6025 (Sandy K).
Fatalities
0
Total incidents
30
Years on record
1984–2015
Latest incident
Dec 2015
Compliance record
MSHA citations since 2000
65
citations
15
significant & substantial
$10,417
proposed penalties
$10,417
paid to date
100% of proposed penalties paid to date, a $0 gap.
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 677 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Dredge #6025 (Sandy K) has $10K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$10K
proposed penalties
$10K
current assessed
$10K
paid to date
$0
outstanding
64 assessments are final orders; 1 contested dockets.
Of $722 in penalties contested before the Commission, $722 was upheld in final decisions.
As of the most recent assessment on 2019-09-05.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘContesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
1citations taken to the federal commission · 2% of citations on record
Stood as issued
1 · 100%
100%
S&S designation survived the contest
ⓘCounts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 1 decided S&S contests · industry: 79%
0%
Penalty reduction in decided contests
$722 proposed, $722 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2017-01-04.
Contested penalties
ⓘA reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2016-06-22, 10 years ago
0%
of limit-tested samples over the exposure limit
13
samples
2
limit-tested
Most sampled contaminants
Respirable dust, <.1mg8
Unlisted Particulate, respirable, <1% Qtz3
Quartz, respirable, >1% Qtz2
Show the individual readings (13)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2016-06-22
Unlisted Particulate, respirable, <1% Qtz
0.35
Mechanic
2016-06-22
Respirable dust, <.1mg
0
Front-end Loader Operator
2016-06-22
Quartz, respirable, >1% Qtz
0.18
1
0.18
Front-end Loader Operator
2011-03-31
Respirable dust, <.1mg
0
Front-end Loader Operator
2011-03-31
Unlisted Particulate, respirable, <1% Qtz
0.5
Dredge/Barge Operator
2011-03-31
Respirable dust, <.1mg
0
Front-end Loader Operator
2011-03-31
Quartz, respirable, >1% Qtz
0.17
0.84
0.20
Kiln/Dryer Operator
2009-04-14
Respirable dust, <.1mg
0
Front-end Loader Operator
2009-04-14
Unlisted Particulate, respirable, <1% Qtz
0.24
Utility Man
2009-04-14
Respirable dust, <.1mg
0
Utility Man
2007-05-31
Respirable dust, <.1mg
0
Scale Man
2007-05-31
Respirable dust, <.1mg
0
Front-end Loader Operator
2007-05-31
Respirable dust, <.1mg
0
Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Dredge #6025 (Sandy K) recorded 0.00 reportable injury cases per 100 full-time workers in 2017.
Injury rate, 2017
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.99 and the all-US-mining average was 2.48 cases per 100 workers.
In Missouri, metal and nonmetal mining averaged 2.71 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2017 *
0.00
0.00
0.000
2016 *
0.00
0.00
0.000
2015 *
4.85
0.00
0.000
2014 *
19.30
19.30
0.000
2011 *
0.00
0.00
0.000
2010 *
0.00
0.00
0.000
2009 *
0.00
0.00
0.000
2008 *
0.00
0.00
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2019
10
2018
3
2017
14
2016
30
2015
23
2014
10
2013
8
2012
7
2011
12
2010
14
2009
14
2008
14
2007
14
2006
16
2005
18
2004
17
2003
16
2002
14
2001
15
2000
14
Source: MSHA quarterly employment and production, updated weekly.
Dredge #6025 (Sandy K) sits in Callaway County, Missouri, where the Census mining category is 0.3% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Callaway County, Missouri · Population 44,541
0.3%
Mining share of county employment
$72,645
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2019 Q4
3,371
0
0
0.0
2019 Q3
6,762
2
0
295.8
2019 Q2
1,668
0
0
0.0
2019 Q1
545
2
0
3669.7
2018 Q4
1,687
0
0
0.0
2018 Q3
2,319
0
0
0.0
2018 Q2
1,986
1
0
503.5
2018 Q1
931
0
0
0.0
Show 72 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2017 Q4
1,420
1
0
704.2
2017 Q3
922
0
0
0.0
2017 Q2
5,342
3
0
561.6
2017 Q1
14,621
0
0
0.0
2016 Q4
19,102
5
1
261.8
2016 Q3
15,005
0
0
0.0
2016 Q2
17,547
6
2
341.9
2016 Q1
13,119
0
0
0.0
2015 Q4
15,751
3
1
190.5
2015 Q3
14,140
2
0
141.4
2015 Q2
6,820
0
0
0.0
2015 Q1
4,565
1
0
219.1
2014 Q4
4,578
1
0
218.4
2014 Q3
5,599
2
0
357.2
2014 Q2
5,024
0
0
0.0
2014 Q1
5,522
0
0
0.0
2013 Q4
3,409
0
0
0.0
2013 Q3
3,383
0
0
0.0
2013 Q2
3,607
3
2
831.7
2013 Q1
3,579
0
0
0.0
2012 Q4
3,798
0
0
0.0
2012 Q3
3,285
2
0
608.8
2012 Q2
3,761
0
0
0.0
2012 Q1
2,930
0
0
0.0
2011 Q4
4,261
0
0
0.0
2011 Q3
9,245
0
0
0.0
2011 Q2
9,423
0
0
0.0
2011 Q1
5,147
3
1
582.9
2010 Q4
9,199
0
0
0.0
2010 Q3
9,746
1
0
102.6
2010 Q2
7,946
0
0
0.0
2010 Q1
4,682
2
1
427.2
2009 Q4
9,165
0
0
0.0
2009 Q3
9,043
0
0
0.0
2009 Q2
8,871
5
2
563.6
2009 Q1
6,774
0
0
0.0
2008 Q4
8,862
3
0
338.5
2008 Q3
8,839
0
0
0.0
2008 Q2
9,070
0
0
0.0
2008 Q1
7,111
0
0
0.0
2007 Q4
8,707
0
0
0.0
2007 Q3
9,080
0
0
0.0
2007 Q2
8,801
2
0
227.2
2007 Q1
7,116
0
0
0.0
2006 Q4
9,033
0
0
0.0
2006 Q3
9,892
1
0
101.1
2006 Q2
10,064
0
0
0.0
2006 Q1
8,874
2
0
225.4
2005 Q4
10,663
0
0
0.0
2005 Q3
12,968
0
0
0.0
2005 Q2
12,104
0
0
0.0
2005 Q1
8,259
2
0
242.2
2004 Q4
11,368
0
0
0.0
2004 Q3
11,519
0
0
0.0
2004 Q2
11,427
0
0
0.0
2004 Q1
8,130
1
0
123.0
2003 Q4
10,746
0
0
0.0
2003 Q3
11,074
0
0
0.0
2003 Q2
9,885
0
0
0.0
2003 Q1
7,137
0
0
0.0
2002 Q4
8,827
0
0
0.0
2002 Q3
8,844
1
0
113.1
2002 Q2
9,368
0
0
0.0
2002 Q1
7,725
0
0
0.0
2001 Q4
8,879
0
0
0.0
2001 Q3
10,127
2
1
197.5
2001 Q2
10,684
0
0
0.0
2001 Q1
7,617
0
0
0.0
2000 Q4
9,395
5
3
532.2
2000 Q3
9,972
0
0
0.0
2000 Q2
10,815
0
0
0.0
2000 Q1
8,607
0
0
0.0
No fatalities recorded at this mine.
Reportable incidents
30 on file
2015 · 1 incident
December 8, 2015MO · Metal/Non-Metalbarge/boat/dredge/towbarge/towboat/leach operator, riverman, deck handHANDLING OF MATERIALS
Employee was leaving for the day, walking across mine property. Other employees found him on the ground unconscious and tried to revive him and called 911.
July 9, 2014MO · Metal/Non-Metalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorSLIP OR FALL OF PERSON
PICKING UP OUTRIGGER PLATE. PICKED IT UP TO PUT IT IN THE HOLDER. IT SLIPPED AND FELL OUT OF HOLDER. HE TRIED TO CATCH IT AND THE PLATE SMASHED HIS FINGER BETWEEN THE FUEL TANK AND THE PLATE.
1997 · 2 incidents
May 19, 1997MO · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techMACHINERY
EE WAS ASSISTING IN PUTTING A 120' CONVEYOR BELT ON WHILE THE GRADER WAS PULLING THE CABLE ATTACHED TO THE BELT. THE CABLE KINKED AND EE HAD HIS FOOT IN THE AIR & THE KINK CAUGHT HIS FOOT & RA ISED HIM IN THE AIR & WHEN THE GRADER BACKED OFFHE FELL ON HIS RIGHT SHOULDER & NECK.
September 28, 1995MO · Metal/Non-Metalbarge/boat/dredge/towbarge/towboat/leach operator, riverman, deck handSTEPPING OR KNEELING ON OBJECT
SCRAP ON FLOOR. EMP WAS CARRYING A SHEET OF 4 X 8 STEEL WITH 2 OTHER EMPLOYEES. AS HE WAS WALKING HE STEPPED ONTO A SCRAP PIECE OF ANGLE IRON. THEREBY TWISTING HIS LOWER BACK.
July 26, 1995MO · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techMACHINERY
WAS ENGAGING DRILL TO STEEL STOCK. WHEN THEY MEET THE DRILL BROKE CAUSING STOCK TO SHIFT AND IT MOVED AROUND AND CAUGHT HIS RIGHT RING FINGER WHEN IT SPUN.
January 12, 1995MO · Metal/Non-Metalbarge/boat/dredge/towbarge/towboat/leach operator, riverman, deck handMACHINERY
WAS WELDING ON DREDGE. HAD WELDING HELMET AND GLASSES ON. HOT SLAG GOT INTO LEFT EYE.
1993 · 5 incidents
September 19, 1993MO · Metal/Non-Metalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorSTEPPING OR KNEELING ON OBJECT
EE WAS WA;LOMG TJRPIGJ SJP[ GPOMG TP TJE ;PADER WJEM JE STE[[ED PM A [O;E PF DORT AMD TJERE WAS A WIRE HIDDEN IN THE PILE OF DIRT WHICH WENT THRU HIS RIGHT SHOE. HE WAS WEARING HARD SOLED SHOE S.
August 16, 1993MO · Metal/Non-Metalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorSLIP OR FALL OF PERSON
EE WAS UNLOADING 6 INCH PIPE FROM TRUCK. CO EE PULLED ON PIPE AND END FELL OFF RACK STRIKING INDEX AND MIDDLE FINGER ON LEFT HAND CAUSING SMASHED FINGERS.
February 17, 1993MO · Metal/Non-Metalwelder (shop)FIRE
USING CUTTING TORCH TO REMOVE SECTION FROM SHAKER DECK IN THE SHOP AREA. SPARKS FROM TORCH CAUGHT HIS COAT SLEEVE ON FIRE, & WHILE ATTEMPTING TO PUT OUT FIRE THE HOSE ON OXYGEN LINE BROKE CAUS ING MORE EXTENSIVE BURN.
1992 · 2 incidents
February 28, 1992MO · Metal/Non-Metalbarge/boat/dredge/towbarge/towboat/leach operator, riverman, deck handSLIP OR FALL OF PERSON
WORKERS WERE INSTALLING NEW CABLE ON BUCYRUS-ERIE CRANE. THE LOOP WAS MADE IN CABLE TO GO AROUND THE WEDGE SOCKET. EMPLOYEE BENT OVER TO ASSIST AS ANOTHER EMPLOYEE PULLED ON CABLE. THE DEAD EN D OF LOOP UNFURLED, STRIKING EMPLOYEE ABOVE THE LEFT EYE.
1991 · 4 incidents
December 31, 1991MO · Metal/Non-Metalbarge/boat/dredge/towbarge/towboat/leach operator, riverman, deck handHANDLING OF MATERIALS
EMPL WAS INSTALLING DRIVE BELTS ON PULLEY OF NEWLY FABRICATED TAIL PULLEY ASSEMBLY IN MAINTENANCE SHOP. AS HE TURNED PULLEY BY HAND LITTLE FINGER OF LEFT HAND WA LACERATED ON END OF SHAFT ON G EAR BOX.
June 20, 1991MO · Metal/Non-Metalwelder (shop)OTHER
EE WAS WORKING ON BLENDING BIN OUTSIDE HE THE SHOP BUILDG. HE HAD BEEN BURNING ON THE METAL BIN AND WAS SEARING SAFETY GOGGLES THE WIND WAS BLOWING LATER A SCRATCHING WAS NOTED IN LEFT EYE AN D EYE WASH WAS USED HOWEVER SCRATCHING COUNTINUE
February 21, 1991MO · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDTOOLS (NONPOWERED)
INJURED WAS HOLDING 4FT LONG 11/2IN PLASTIC CONDUIT ON END WHILE COWORKER WAS CUTTING HOLE IN CONDUIT FOR GROUND WIRE EXIT COWORKERS KNIFE SLIPPED OUT OF SLOT & TRAVELED UPWARDS CUTTING LITTLE FINGER OF INJUREDS RT HAND LACERATION R EQUIREDFIVE STITCHES & TETNUS SHOT AT EMERGENCY ROOM
1989 · 3 incidents
December 19, 1989MO · Metal/Non-Metalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorHANDLING OF MATERIALS
FOUR MAN CREW WAS REMOVING TIRE FROM 966C CAT FRONTEND LOADER TO REPLACE BEARING. ESTIMATED WEIGHT OF TIRE 950 LBS WHEN TIRE CAME OFF AXLE IT ROLLED PINCHING EMPL RIGHT HAND LONG FINGER BETWEE N TIRE & FENDER WELL CASUING LACERATION TO END JOINT OF RIGHT HAND LONG FINGER. REQUIRED THREE SUTURES & TETNUS SHOT. NO BROKEN BONES.
March 1, 1989MO · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
HE WAS INSTALLING A TORQUE CONVERTER ON THE 988 CAT LOADER AND WAS PUTTING THE FLY WHEEL BACK ON WHEN HE FELT THE PULL IN HIS BACK.
February 6, 1989MO · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
IT WAS SLEETING AND SNOWING THAT DAY.THE INJURED WAS HEADED TO THE COMPANY TRUCK TO PUT HIS LUNCH BUCKET AWAY AND HE STEPPED OVER AN I-BEAM AND HIS FOREWARD FOOT SLIPPED ON THE ICE AND SLIPPED OUT FROM UNDER HIM CAUSING HIM TO DO THE SPLITSAND FALL ON THE I-BEAM.
1987 · 1 incident
March 20, 1987MO · Metal/Non-Metalbarge/boat/dredge/towbarge/towboat/leach operator, riverman, deck handHANDTOOLS (NONPOWERED)