Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
Countries
Peru Chile
English Español
← Back to search

Eagle #3: 13 MSHA citations Metal/Non-Metal

CSA Materials Inc · Surface
Controlled by Roger Albert
San Angelo, Val Verde County, TX  ·  Abandoned
MSHA Mine ID: 4104799

Eagle #3 has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Eagle #3.

Fatalities
0
Total incidents
0
Years on record
—
Latest incident
—
Compliance record
MSHA citations since 2010
13
citations
2
significant & substantial
$1,984
proposed penalties
$1,984
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
See CSA Materials Inc's full MSHA compliance history →
Inspection activity
MSHA inspections since 2010
8
inspections on record
90
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 90 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Eagle #3 has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$0
outstanding
13 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2013-06-05.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
15.4%
significant & substantial
7.7%
high negligence or reckless
15.4%
reasonably likely or greater
30.8%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 92.3% moderate, 7.7% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2011-06-21, 15 years ago
0%
of limit-tested samples over the exposure limit
4
samples
3
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz3
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (4)
Date Contaminant Concentration Limit Conc / limit Occupation
2011-06-21 Unlisted Particulate, respirable, <1% Qtz 0.12 Truck Driver
2011-06-21 Quartz, respirable, >1% Qtz 0.45 2.77 0.16 Truck Driver
2011-06-21 Quartz, respirable, >1% Qtz 0.32 1.97 0.16 Crusher Oper/Worker
2011-06-21 Quartz, respirable, >1% Qtz 0.51 2.92 0.17 Cleanup Man
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Eagle #3 recorded 0.00 reportable injury cases per 100 full-time workers in 2012.

Injury rate, 2012
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 2.48 and the all-US-mining average was 2.96 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 2.82 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2012 * 0.00 0.00 0.000
2011 * 0.00 0.00 0.000
2010 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. CSA Materials Inc 2009 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2013 12
2012 15
2011 15
2010 12
2009 11
Source: MSHA quarterly employment and production, updated weekly.

Eagle #3 sits in Val Verde County, Texas, where the Census mining category is 3.0% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Val Verde County, Texas · Population 47,647
3.0%
Mining share of county employment
$59,673
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2013 Q3 6,578 0 0 0.0
2013 Q2 9,138 1 0 109.4
2013 Q1 7,484 0 0 0.0
2012 Q4 6,738 2 0 296.8
2012 Q3 10,723 0 0 0.0
2012 Q2 11,870 3 0 252.7
2012 Q1 11,406 1 0 87.7
2011 Q4 7,115 0 0 0.0
Show 8 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2011 Q3 9,204 0 0 0.0
2011 Q2 14,292 3 2 209.9
2011 Q1 10,144 1 0 98.6
2010 Q4 8,100 0 0 0.0
2010 Q3 14,041 2 0 142.4
2010 Q2 10,300 0 0 0.0
2010 Q1 0 0 0
2009 Q4 5,278 0 0 0.0

No reportable incidents on file.

MSHA has no recorded reportable accidents for this mine in the current dataset. New reports appear here within a week of being filed.