Mining Incidents

Fisher Quarry: 1 recorded fatality Metal/Non-Metal

Controlled by Heidelberg Materials AG
Vancouver, Clark County, WA  ·  Abandoned
MSHA Mine ID: 4503039

Fisher Quarry has $45K in proposed MSHA penalties and $496 outstanding across 4 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Fisher Quarry.

Fatalities
1
Total incidents
39
Years on record
1991–2010
Latest incident
Mar 2010
Compliance record
MSHA citations since 2001
170
citations
23
significant & substantial
$44,881
proposed penalties
$41,775
paid to date
93% of proposed penalties paid to date, a $3,106 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
58
inspections on record
1,076
inspection hours
15.8
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
170 citations across 1,076 inspection hours.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
2
Section 107(a) orders
Most recent order: 2017-04-25.
On record since 2010.
Source: MSHA imminent-danger order records, updated weekly.

Fisher Quarry has $45K in proposed MSHA penalties and $496 outstanding across 4 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$45K
proposed penalties
$42K
current assessed
$42K
paid to date
$496
outstanding
166 assessments are final orders; 4 contested dockets.
Of $14K in penalties contested before the Commission, $11K was upheld in final decisions.
As of the most recent assessment on 2018-08-07.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
13.9%
significant & substantial
3.0%
high negligence or reckless
13.9%
reasonably likely or greater
53.6%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 18.7% low, 78.3% moderate, 3.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
5 citations taken to the federal commission · 3% of citations on record
  • Settled 4 · 80%
  • Stood as issued 1 · 20%
75%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 4 decided S&S contests · industry: 79%
18%
Penalty reduction in decided contests
$14K proposed, $11K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2017-07-11.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2010-202M Settlement Barbour 2012 $7K → $6K
WEST 2008-1341M Settlement Barbour 2012 $5K → $4K
WEST 2017-0573 Dismissal Manning 2017 $2K → $2K
WEST 2011-575M Settlement Barbour 2012 $100 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2019-06-05, 7 years ago
0%
of limit-tested samples over the exposure limit
27
samples
4
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg13
  • Unlisted Particulate, respirable, <1% Qtz10
  • Quartz, respirable, >1% Qtz3
  • Nuisance dust, respirable, <1% Qtz1
Show the individual readings (27)
Date Contaminant Concentration Limit Conc / limit Occupation
2019-06-05 Nuisance dust, respirable, <1% Qtz 0.16 10 0.02 Front-end Loader Operator
2017-04-26 Respirable dust, <.1mg 0 Backhoe Operator
2017-04-26 Respirable dust, <.1mg 0 Backhoe Operator
2017-04-26 Respirable dust, <.1mg 0 Front-end Loader Operator
2017-04-26 Respirable dust, <.1mg 0 Bulldozer Operator
2013-01-08 Respirable dust, <.1mg 0 Front-end Loader Operator
2013-01-08 Respirable dust, <.1mg 0 Crusher Oper/Worker
2013-01-08 Respirable dust, <.1mg 0 Truck Driver
2010-12-08 Respirable dust, <.1mg 0 Drill Operator, Rotary Air
2010-12-08 Unlisted Particulate, respirable, <1% Qtz 0.2 Drill Operator, Rotary Air
2010-01-27 Respirable dust, <.1mg 0 Drill Operator, Rotary
2010-01-27 Respirable dust, <.1mg 0 Drill Operator, Rotary
2009-01-08 Respirable dust, <.1mg 0 Shovel Operator
2009-01-08 Unlisted Particulate, respirable, <1% Qtz 0.86 Laborer, Bullgang
2009-01-08 Unlisted Particulate, respirable, <1% Qtz 0.88 Stone Polisher/Cutter
2009-01-08 Unlisted Particulate, respirable, <1% Qtz 0.58 Stone Polisher/Cutter
2004-05-19 Unlisted Particulate, respirable, <1% Qtz 0.81 Stone Polisher/Cutter
2004-05-19 Quartz, respirable, >1% Qtz 0.12 1.25 0.10 Utility Man
2003-05-21 Quartz, respirable, >1% Qtz 0.3 2.08 0.14 Backhoe Operator
2003-05-21 Unlisted Particulate, respirable, <1% Qtz 0.22 Truck Driver
2003-05-21 Respirable dust, <.1mg 0 Truck Driver
2003-05-21 Unlisted Particulate, respirable, <1% Qtz 0.21 Truck Driver
2001-07-24 Quartz, respirable, >1% Qtz 0.27 1.68 0.16 Truck Driver
2001-07-24 Unlisted Particulate, respirable, <1% Qtz 0.56 Crusher Oper/Worker
2001-07-24 Unlisted Particulate, respirable, <1% Qtz 0.35 Crusher Oper/Worker
2001-07-24 Unlisted Particulate, respirable, <1% Qtz 0.69 Crusher Oper/Worker
2001-07-24 Respirable dust, <.1mg 0 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Fisher Quarry recorded 0.00 reportable injury cases per 100 full-time workers in 2016.

Injury rate, 2016
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 2.17 and the all-US-mining average was 2.59 cases per 100 workers.
In Washington, metal and nonmetal mining averaged 3.31 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2016 * 0.00 0.00 0.000
2015 * 0.00 0.00 0.000
2012 0.00 0.00 0.000
2011 * 0.00 0.00 0.000
2010 * 2.47 0.00 0.000
2009 * 3.92 0.00 0.000
2008 * 2.88 0.00 0.000
2007 1.98 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Pacific Rock Products Llc 1985 to 2000
  2. Pacific Rock Products LLC 2000 to 2002
  3. Pacific Rock Products, LLC 2002 to 2017
  4. Cadman Materials Inc 2017 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2019 6
2018 6
2017 8
2016 14
2015 14
2014 9
2013 23
2012 35
2011 34
2010 29
2009 23
2008 33
2007 44
2006 43
2005 45
2004 43
2003 44
2002 27
2001 37
2000 35
Source: MSHA quarterly employment and production, updated weekly.

Fisher Quarry sits in Clark County, Washington, where the Census mining category is 0.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Clark County, Washington · Population 510,516
0.1%
Mining share of county employment
$94,948
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2019 Q3 1,384 0 0 0.0
2019 Q2 3,292 0 0 0.0
2019 Q1 3,341 0 0 0.0
2018 Q4 3,409 0 0 0.0
2018 Q3 2,339 1 0 427.5
2018 Q2 2,341 0 0 0.0
2018 Q1 3,067 3 0 978.2
2017 Q4 3,688 0 0 0.0
Show 68 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2017 Q3 4,768 0 0 0.0
2017 Q2 4,919 3 1 609.9
2017 Q1 5,648 0 0 0.0
2016 Q4 8,032 1 0 124.5
2016 Q3 8,580 0 0 0.0
2016 Q2 7,935 0 0 0.0
2016 Q1 9,100 2 0 219.8
2015 Q4 8,316 0 0 0.0
2015 Q3 8,955 0 0 0.0
2015 Q2 8,818 4 1 453.6
2015 Q1 8,266 0 0 0.0
2014 Q2 7,250 0 0 0.0
2014 Q1 1,557 0 0 0.0
2013 Q4 0 0 0
2013 Q2 24,006 0 0 0.0
2013 Q1 30,104 4 2 132.9
2012 Q4 32,181 0 0 0.0
2012 Q3 29,309 0 0 0.0
2012 Q2 21,131 2 0 94.6
2012 Q1 20,977 0 0 0.0
2011 Q4 23,334 4 0 171.4
2011 Q3 24,734 0 0 0.0
2011 Q2 25,978 1 0 38.5
2011 Q1 23,015 0 0 0.0
2010 Q4 12,054 1 0 83.0
2010 Q3 31,522 6 3 190.3
2010 Q2 21,711 1 0 46.1
2010 Q1 15,606 9 2 576.7
2009 Q4 14,024 0 0 0.0
2009 Q3 12,295 7 2 569.3
2009 Q2 12,201 0 0 0.0
2009 Q1 12,536 7 2 558.4
2008 Q4 13,322 0 0 0.0
2008 Q3 19,205 0 0 0.0
2008 Q2 19,894 9 0 452.4
2008 Q1 17,020 8 0 470.0
2007 Q4 20,910 0 0 0.0
2007 Q3 25,349 0 0 0.0
2007 Q2 27,111 0 0 0.0
2007 Q1 27,796 4 0 143.9
2006 Q4 28,056 0 0 0.0
2006 Q3 26,240 0 0 0.0
2006 Q2 25,526 6 0 235.1
2006 Q1 25,395 4 0 157.5
2005 Q4 30,752 0 0 0.0
2005 Q3 24,760 1 0 40.4
2005 Q2 25,812 0 0 0.0
2005 Q1 28,202 8 1 283.7
2004 Q4 29,565 0 0 0.0
2004 Q3 23,878 0 0 0.0
2004 Q2 22,356 4 0 178.9
2004 Q1 19,914 0 0 0.0
2003 Q4 31,186 2 0 64.1
2003 Q3 26,752 0 0 0.0
2003 Q2 23,099 5 0 216.5
2003 Q1 29,813 0 0 0.0
2002 Q4 23,710 3 0 126.5
2002 Q3 19,352 2 0 103.3
2002 Q2 15,290 0 0 0.0
2002 Q1 14,297 0 0 0.0
2001 Q4 20,192 1 0 49.5
2001 Q3 28,944 10 2 345.5
2001 Q2 21,735 0 0 0.0
2001 Q1 25,996 0 0 0.0
2000 Q4 26,072 0 0 0.0
2000 Q3 22,691 0 0 0.0
2000 Q2 16,636 0 0 0.0
2000 Q1 14,498 0 0 0.0

Fatalities at this mine

1 recorded
January 11, 1994 WA · Metal/Non-Metal beltman, conveyor man, conveyor belt worker, mobile bridge carrierman, feeder operator, conveyor rider Fatality · MACHINERY
Pacific Rock Products Llc · Struck by falling object

MAINTENANCE ON THE HORIZONTAL SHAFT IMPACT CRUSHER. HYDRAULIC LINE BLEW AND COVER TO CRUSHER CAME DOWN AND PINCHED THE COVER AT THE WAIST. THE INJURIES RESULTED IN A FATALITY.

Reportable incidents

38 on file (excluding fatalities above)

2010 · 1 incident

March 27, 2010 WA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Pacific Rock Products, LLC · Over-exertion in pulling or pushing objects

EE was grinding on a feed hopper. The electrical cord was caught on the ladder he turned to his right to pull some slack in the cord and felt a strain in his lower back.

2009 · 1 incident

June 22, 2009 WA · Metal/Non-Metal ledgeman/hand, quarry man HANDTOOLS (NONPOWERED)
Pacific Rock Products, LLC · Over-exertion (Not Elsewhere Classified)

Employee was attempting to move a tail pulley with a 6 ft bar and felt a sharp pain in his lower back.

2008 · 1 incident

September 29, 2008 WA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech STRIKING OR BUMPING
Pacific Rock Products, LLC · Struck against stationary object

While performing work on the catwalk of the jaw crusher, the worker turned his body to the left and his elbow struck the handrail.

2007 · 1 incident

August 7, 2007 WA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Pacific Rock Products, LLC · Struck by falling object

While removing 20' x 2" x 2" steel tubing from the rack, a second tubing rolled from the pile. The edge of the tubing made contact with the employee's right forearm resulting in a 4" laceration.

2006 · 1 incident

September 23, 2006 WA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Pacific Rock Products, LLC · Caught in, under or between a moving and a stationary object

EE & co-worker were replacing & repairing track groups on the 330 excavator. In an attempt to align the lock slots with the slip fit pins to join the tracks together, EE tapped on the pin with a sledge hammer. The pins did not move. EE took a more forceful swing, the hit glanced off the pin toward the track pad where his hand was caught between the pad & the sledge handle.

2005 · 1 incident

February 24, 2005 WA · Metal/Non-Metal driller, highwall operator, highwall drill operator DISORDERS (REPEATED TRAUMA)
Pacific Rock Products, LLC · (Not Elsewhere Classified)

His hearing is getting worse all the time. he wears ear plugs/muff and is in an enclosed cab. he has been a driller for many years prior to coming to work at pacific rock products all so it is not clear if the loss was caused by conditions at pacific rock products lll.

2004 · 2 incidents

October 12, 2004 WA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Pacific Rock Products, LLC · Struck by flying object

EMPLOYEE WAS HAMMERING ON A BLOW BAR. A PIECE OF METAL FLEW OFF AND STRUCK HIM BETWEEN THE RIGHT THUMB AND FOREFINGER. THE STEEL PIECE WAS REMOVED AND ONE STITCH WAS REQUIRED TO CLOSE THE WOUND.

August 2, 2004 WA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Pacific Rock Products, LLC · Struck by falling object

EE WAS CUTTING A CONVEYOR BELT WITH A UTILITY KNIFE. THE KNIFE SLIPPED AND CUT HIS RIGHT HAND BELOW THE THUMB. THE LACERATION REQUIRED THREE STITCHES TO CLOSE.

2003 · 2 incidents

September 11, 2003 WA · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler HANDLING OF MATERIALS
Pacific Rock Products, LLC · Struck by falling object

EE WAS SHOVELING MUD UNDER THE SCALP BYPASS CONVEYOR. A PIECE OF WET MUD FELL FROM A RETURN ROLLER AND STRUCK HIM IN THE HARD HAT. THE IMPACT CAUSED HIS HEAD TO SNAP BACK JARRING HIS NECK. VIS ITED DOCTOR ON 9/22/03 AND DIAGNOSED WITH A NECK STRAIN.

March 6, 2003 WA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Pacific Rock Products, LLC · Struck by flying object

EE WAS WELDING AND GRINDING ON A CRACKED CROSS MEMEBER OF A TRANSFER. HE HAD LIMITED ACCESS. HE WORE SAFETY GLASSES AT ALL TIMES HOWEVER HE DID NOT WEAR A SHIELD A TALL TIMES BECAUSE OF TIGHT ACCESS. THE NEXT MORNING HE FELT SOMETHING IN HIS LEFT EYE. IT WAS REMOVED AT THE CLINIC THAT DAY. RELEASED TO FULL DUTY.

2002 · 3 incidents

November 19, 2002 WA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Pacific Rock Products, LLC · Fall onto or against objects

EE WAS CHECKING THE BUCKET KICKOUT MAGNET ON HTE 988F. HE HAD CLIMBED ONTO THE ARMS OF THE LOADER TO ACCESS THE MAGNET. WHEN HE FINISHED THE WORK, HE CLIMBED BACK DON. HE PLACED HIS LEFT FOOT ON A BUCKET ARM AND WHEN HE TRANSFERRED HIS WEIGHT, HIS FOOT SLIPPED AND HE FELL. HIS LEFT SIDE STRUCK THE BUCKET ARM. IT WAS RAINING OUT AT THE TIME.

October 12, 2002 WA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Pacific Rock Products, LLC · Struck by... (Not Elsewhere Classified)

EE WAS IN THE PROCESS OF WELDING 1/2" STEEL PLATE TO THE OUTSIDE OF THE 375 EXCAVATOR BUCKET. WHEN HE LIFTED THE PLATE INTO POSITION, HE RESTED IT JUST ABOVE HIS RIGHT KNEE. SEVERAL DAYS LATER THE KNEE SWELLED UP, BUT THERE WAS NO PAIN. HE VISITED A DOCTOR ON 10/30/02 AS THE KNEE WAS NOT IMPROVING. DIAGNOSED WITH POST TRAUMATIC PATELLAR FEMORAL SYNDROME OR WATER ON THE KNEE.

July 30, 2002 WA · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler HANDLING OF MATERIALS
Pacific Rock Products LLC · Caught in, under or between a moving and a stationary object

TWO EMPLOYEES HAD THE LID OF THE IMPACTOR IN THE RAISED POSITION TO CHECK OUT A PROBLEM. THE WEDGE SHAPED STOP BLOCK WAS IN ON ONE SIDE. VICTIM WAS ADJUSTING THE BLOCK ON HIS SIDE. HIS LEFT TH UMB WAS PINCHED BETWEEN THE TOP OF THE BLOCK AND THE BOTTOM OF THE HOOD. HE LOST THE THUMBNAIL.

2001 · 3 incidents

August 9, 2001 WA · Metal/Non-Metal backhoe operator, trackhoe operator, crane operator HANDLING OF MATERIALS
Pacific Rock Products LLC · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE WAS INSTALLING A NEW CURTAIN LINER IN THE CRUSHER. THE LINER SLIPPED AND PINCHED THE LITTLE FINGER ON HIS LEFT HAND BETWEEN THE NEW LINER AND AN ADJACENT LINER. AS HE PULLED HIS HAND OUT OF THE WAY, THE END OF HIS LITTLE FINGER WASCUT AND THE NAIL WAS DAMAGED. STITCHES REQUIRED TO TREAT THE INJURY.

July 6, 2001 WA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer POWERED HAULAGE
Pacific Rock Products LLC · Struck against a moving object

HAUL TRUCK WAS DUMPING ROCK ON STOCKPILE. AS BED WAS BEING RAISED, TRUCK WENT OVER SIDE OF STOCKPILE, DOWN THE SLOP AND CAME TO REST AT TOE OF PILE. DRIVER WAS WEARIGN SEAT BELT. CONTRIBUTING CONDITIONS INCLUDE DRIVER PROCEEDING TO DUMP WAS TOO CLOSE TO EDGE AT AREA OF STOCKPILE WHERE BVERM HAD SLUGHED. THE TRUCK'S CATWALKS, HANDRAILS, CAB DOOR AND WINDOWS WERE DAMAGED.

May 4, 2001 WA · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey POWERED HAULAGE
Pacific Rock Products LLC · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE WAS JUMP STARTING COMPANY VEHICLE, WHILE EMPLOYEE WAS UNHOKKING TRUCK FROM OTHER VEHICLE, THE BRAKES FAILED, TRUCK ROLLED AND EMPLOYEE WAS TRAPPED BRTWEEN THE TWO VEHICLES.

1999 · 2 incidents

January 21, 1999 WA · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler HANDLING OF MATERIALS
Pacific Rock Products Llc · Caught in, under or between a moving and a stationary object

HOOD ON A 980G BUCKET LOADER HAD TO BE LIFTED. ELECTRIC MOTOR WAS BROKEN- A TWO MAN JOB. WHEN HE WENT TO CLOSE HOOD, HE DIDN'T HAVE HELP. THE HOOD SLIPPED OUT OF HANDS AND SLAMMED DOWN ON TOP OF RIGHT FOOT.

January 20, 1999 WA · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler SLIP OR FALL OF PERSON
Pacific Rock Products Llc · Fall from machine

STANDING ON DOZER TRACK, WAS KICKING OUT MUD FROM THE HARD BAR. STEPPED ON PUSH RAM WHICH WAS SLICK & FELL, LANDING ON WRIST.

1998 · 5 incidents

September 25, 1998 WA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Pacific Rock Products Llc · Struck by... (Not Elsewhere Classified)

AFTER PARKING BOULDER BREAKER (#25-999) HE GOT OUT AND AFTER HE REACHED THE GROUND HE SHUT THE DOOR. AS HE TURNED AROUND AFTER SHUTTING THE DOOR HE WAS STRUCK N THE HEAD BY THE DOOR WINDOW AND FRAME AND SUFFERED WHAT APPEARED TO BE A JAMMEDNECK AND COMPLAINED OF PAIN.

March 11, 1998 WA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Pacific Rock Products Llc · Over-exertion (Not Elsewhere Classified)

EE WAS HOSING OFF PAD AND WAS SPLASHED IN EYE WHICH MOMENTARILY DISORIENTED. HE STEPPED OFF PAD AND TWISTED KNEE.

February 16, 1998 WA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Pacific Rock Products Llc · Over-exertion in lifting objects

HE WAS LIFTING UP ON A GRAVITY WIPE WHILE INSTALLING IT ON THE CONVEYOR, TWISTED HIS BACK AND FELT SOMETHING PULL.

January 23, 1998 WA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator DISORDERS (REPEATED TRAUMA)
Pacific Rock Products Llc · Over-exertion (Not Elsewhere Classified)

PROLONGE USE OF LEVERS ON TRACK HOE & OTHER HEAVY EQUIPMENT. CREATED OR WAS PART OF A CARPAL TUNNEL SYNDROME IN RIGHT HAND & FOREARM.

January 8, 1998 WA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Pacific Rock Products Llc · Struck against stationary object

MOVING A MOTOR, TRYING TO MOVE BY PRYING WITH PRY BAR. BAR SLIPPED & ELBOW STRUCK MOTOR.

1997 · 8 incidents

July 14, 1997 WA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Pacific Rock Products Llc · Over-exertion in wielding or throwing objects

EE HURT SHOULDER AND NECK MUSCLES WHILE THROWING A PIECE OF METAL.

June 4, 1997 WA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Pacific Rock Products Llc · Over-exertion in lifting objects

LIFTED TOOTH WEDGE ONTO CATWALK.

May 30, 1997 WA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Pacific Rock Products Llc · Struck by... (Not Elsewhere Classified)

EE SAT IN PASSENGER SEAT OF 777 HAUL TRUCK. HE WAS HOT AND PLACED HIS HAND DOWN TO THE FAN BLOWING COLD AIR FROM A/C. THERE WAS NO SHROUD, AND HE CUT HIS 4TH FINGER ON THE LEFT HAND.

April 14, 1997 WA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Pacific Rock Products Llc · Over-exertion (Not Elsewhere Classified)

RIGHT SHOULDER GRADUALLY STARTED HURTING WHILE OPERATING A 980 CAT LOADER.

March 11, 1997 WA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Pacific Rock Products Llc · Over-exertion in lifting objects

WHILE LIFTING A SAWHORSE, EE STRAINED HIS LOWER BACK.

February 18, 1997 WA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Pacific Rock Products Llc · Struck by... (Not Elsewhere Classified)

WHILE USING A SLEDGEHAMMER TO KNOCK OUT PINS ON TOGGLE BOLTS, THE HANDLE HIT THE BOLT, SMASHING MIDDLE FINGER OF THE RT HAND. 4 STITCHES REQUIRED TO CLOSE OPEN WOUND CAUSED BY IMPACT.

February 14, 1997 WA · Metal/Non-Metal welder (shop) MACHINERY
Pacific Rock Products Llc · Struck by... (Not Elsewhere Classified)

WHILE WELDING, A PIECE OF METAL SLAG BOUNCED UP UNDER WELDING LOAD AND LODGED IN RIGHT EYE.

1996 · 3 incidents

October 17, 1996 WA · Metal/Non-Metal drill operator MACHINERY
Pacific Rock Products Llc · Caught in, under or between (Not Elsewhere Classified)

DRILL STEEL SLIPPED OUT OF HANDS, TRAPPING/ SMASHING 2 FINGERS BETWEEN GUIDE AND STEEL

July 1, 1996 WA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Pacific Rock Products Llc · Caught in, under or between (Not Elsewhere Classified)

EE'S FINGER WAS CAUGHT BETWEEN A ROCK AND HIS TOOL BOX. EE SUFFERED A CONTUSION AS A RESULT OFTHE PINCH.

April 9, 1996 WA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer POWERED HAULAGE
Pacific Rock Products Llc · Struck against a moving object

EMPLOYEE WAS IN CAT WAGON. EMPLOYEE OPERATING LOADER DID NOT SEE HER AND BACKED INTO HER. CAT WAGON WAS PARKED.

1995 · 2 incidents

October 23, 1995 WA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Pacific Rock Products Llc · Struck by... (Not Elsewhere Classified)

EE WAS REMOVING A PIECE OF METAL THAT HAD LODGED IN THE TAIL PULLEY OF SCREENING PLANT. PLANT WAS SHUT DOWN BEFORE REMOVAL BEGAN. WHEN PULLED, STEEL PUNCTURED SKIN ON LEFT ARM.

January 30, 1995 WA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Pacific Rock Products Llc · Struck by... (Not Elsewhere Classified)

CO-WORKER SHOVELING NEXT TO EE HIT HIM IN THE NOSE WITH SHOVEL

1994 · 1 incident

November 2, 1994 WA · Metal/Non-Metal crane operator, mobile equipment operator (meo), dragline operator, dropball operator, rigger MACHINERY
Pacific Rock Products Llc · Unclassified, insufficient data

NOTICED INCREASING PAIN WHILE OPERATING CRANE. USES RT HAND FOR PULLING ON HOIST LEVER.

1991 · 1 incident

April 4, 1991 WA · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor HANDTOOLS (NONPOWERED)
Pacific Rock Products Llc · Fall from machine

EMPLOYEE WAS WORKING WITH A CABLE TYPE(COME-ALONG) PULLER ON A CONVEYOR 10 FEEL ABOVE THE GROUND - THE TOOL SLIPED AND HE LOST HIS BALANCE, FALLING TO THE ROCK FLOOR.