Mining Incidents

Fort Dodge Mine: 487 MSHA citations Metal/Non-Metal

Fort Dodge, Webster County, IA  ·  Active
MSHA Mine ID: 1300032

Fort Dodge Mine has $163K in proposed MSHA penalties and $0 outstanding across 8 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Fort Dodge Mine.

Fatalities
0
Total incidents
72
Years on record
1985–2025
Latest incident
Apr 2025
Compliance record
MSHA citations since 2000
487
citations
69
significant & substantial
$163,093
proposed penalties
$152,418
paid to date
93% of proposed penalties paid to date, a $10,675 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
158
inspections on record
4,540
inspection hours
10.7
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
487 citations across 4,540 inspection hours.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2022-06-06.
On record since 2022.
Source: MSHA imminent-danger order records, updated weekly.

Fort Dodge Mine has $163K in proposed MSHA penalties and $0 outstanding across 8 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$163K
proposed penalties
$152K
current assessed
$152K
paid to date
$0
outstanding
485 assessments are final orders; 8 contested dockets.
Of $35K in penalties contested before the Commission, $23K was upheld in final decisions.
As of the most recent assessment on 2026-04-14.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
14.2%
significant & substantial
3.9%
high negligence or reckless
14.2%
reasonably likely or greater
54.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.2% none, 17.1% low, 78.8% moderate, 3.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
14 citations taken to the federal commission · 3% of citations on record
  • Settled 11 · 79%
  • Stood as issued 2 · 14%
  • Vacated or withdrawn 1 · 7%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 5 decided S&S contests · industry: 79%
36%
Penalty reduction in decided contests
$37K proposed, $23K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2023-06-07.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2014-0437 Settlement Rae 2015 $14K → $9K
CENT 2011-683M Settlement McCarthy 2013 $9K → $9K
CENT 2022-0253 Settlement Voisin 2023 $5K → $3K
CENT 2017-0378 Settlement Paez 2018 $3K → $320
CENT 2011-633M Settlement McCarthy 2013 $2K → $1K
CENT 2018-0348 Settlement Manning 2018 $838 → $670
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-04-15
7%
of limit-tested samples over the exposure limit
124
samples
121
limit-tested
Most sampled contaminants
  • Diesel particulate (total carbon)605 over
  • Diesel Particulate Material213 over
  • Nuisance dust, respirable, <1% Qtz20
  • Total Carbon,calculated from elemental carbon.14
Show the individual readings (100)
Date Contaminant Concentration Limit Conc / limit Occupation
2012-02-08 TC @ 160 311 160 1.94 Scaling (mechanical)
2012-02-08 EC @ 160 178 160 1.11 Drill Operator, Jumbo Perc.
2012-02-08 TC @ 160 247 160 1.54 Drill Operator, Jumbo Perc.
2012-02-08 EC @ 160 226 160 1.41 Scaling (mechanical)
2008-09-11 TC @ 160 236 160 1.48 Truck Driver
2008-09-11 TC @ 160 235 160 1.47 Front-end Loader Operator
2008-09-11 TC from EC @ 160 177 160 1.11 Front-end Loader Operator
2008-09-10 TC @ 160 179 160 1.12 Blaster, Powder Gang
2005-08-15 Diesel Particulate Material 398.75 308 1.29 Front-end Loader Operator
2005-07-19 Diesel Particulate Material 330.17 308 1.07 Front-end Loader Operator
2005-07-19 Diesel Particulate Material 464.47 308 1.51 Blaster, Powder Gang
2026-04-15 ORGANIC CARBON 0 Drill Operator, Rotary Air
2026-04-15 TC @ 160 0 160 0.00 Drill Operator, Rotary Air
2026-04-15 EC @ 160 0 160 0.00 Bit Sharpener
2026-04-15 ORGANIC CARBON 0 Bit Sharpener
2026-04-15 TC @ 160 0 160 0.00 Bit Sharpener
2026-04-15 TC from EC @ 160 0 160 0.00 Bit Sharpener
2026-04-15 TC from EC @ 160 0 160 0.00 Drill Operator, Rotary Air
2026-04-15 Respirable dust, <.1mg 0 Scraper Operator
2026-04-15 EC @ 160 0 160 0.00 Drill Operator, Rotary Air
2022-07-26 TC from EC @ 160 0 160 0.00 Front-end Loader Operator
2022-07-26 TC from EC @ 160 0 160 0.00 Truck Driver
2022-07-26 EC @ 160 0 160 0.00 Front-end Loader Operator
2022-07-26 EC @ 160 0 160 0.00 Truck Driver
2022-07-26 ORGANIC CARBON 0 Front-end Loader Operator
2022-07-26 TC @ 160 0 160 0.00 Truck Driver
2022-07-26 TC @ 160 0 160 0.00 Front-end Loader Operator
2022-07-26 ORGANIC CARBON 0 Truck Driver
2021-08-18 Nuisance dust, respirable, <1% Qtz 0.25 10 0.03 Front-end Loader Operator
2021-05-12 TC @ 160 0 160 0.00 Blaster, Powder Gang
2021-05-12 EC @ 160 0 160 0.00 Blaster, Powder Gang
2021-05-12 ORGANIC CARBON 0 Blaster, Powder Gang
2021-05-12 TC from EC @ 160 0 160 0.00 Scaling (mechanical)
2021-05-12 EC @ 160 0 160 0.00 Scaling (mechanical)
2021-05-12 TC @ 160 0 160 0.00 Scaling (mechanical)
2021-05-12 ORGANIC CARBON 0 Scaling (mechanical)
2021-05-12 TC from EC @ 160 0 160 0.00 Blaster, Powder Gang
2019-12-12 EC @ 160 0 160 0.00 Truck Driver
2019-12-12 TC @ 160 0 160 0.00 Truck Driver
2019-12-12 EC @ 160 0 160 0.00 Drill Operator, Rotary
2019-12-12 TC from EC @ 160 0 160 0.00 Drill Operator, Rotary
2019-12-12 TC @ 160 0 160 0.00 Drill Operator, Rotary
2019-12-12 TC from EC @ 160 0 160 0.00 Truck Driver
2019-12-12 EC @ 160 48 160 0.30 Blaster, Powder Gang
2019-12-12 TC from EC @ 160 0 160 0.00 Blaster, Powder Gang
2019-12-12 TC @ 160 66 160 0.41 Blaster, Powder Gang
2019-05-20 TC from EC @ 160 0 160 0.00 Drill Operator, Jumbo Perc.
2019-05-20 TC from EC @ 160 0 160 0.00 Front-end Loader Operator
2019-05-20 EC @ 160 14 160 0.09 Front-end Loader Operator
2019-05-20 TC @ 160 44 160 0.28 Front-end Loader Operator
2019-05-20 TC @ 160 0 160 0.00 Drill Operator, Jumbo Perc.
2019-05-20 TC from EC @ 160 0 160 0.00 Scaling (mechanical)
2019-05-20 EC @ 160 14 160 0.09 Scaling (mechanical)
2019-05-20 TC from EC @ 160 0 160 0.00 Blaster, Powder Gang
2019-05-20 EC @ 160 0 160 0.00 Blaster, Powder Gang
2019-05-20 TC @ 160 0 160 0.00 Scaling (mechanical)
2019-05-20 EC @ 160 0 160 0.00 Drill Operator, Jumbo Perc.
2019-05-20 TC @ 160 0 160 0.00 Blaster, Powder Gang
2018-07-03 EC @ 160 12 160 0.08 Scaling (mechanical)
2018-07-03 TC @ 160 0 160 0.00 Scaling (mechanical)
2018-07-03 TC @ 160 0 160 0.00 Front-end Loader Operator
2018-07-03 TC from EC @ 160 0 160 0.00 Truck Driver
2018-07-03 EC @ 160 0 160 0.00 Truck Driver
2018-07-03 TC @ 160 0 160 0.00 Crusher Oper/Worker
2018-07-03 EC @ 160 0 160 0.00 Crusher Oper/Worker
2018-07-03 TC from EC @ 160 0 160 0.00 Scaling (mechanical)
2018-07-03 EC @ 160 0 160 0.00 Front-end Loader Operator
2018-07-03 TC @ 160 80 160 0.50 Truck Driver
2018-07-03 TC from EC @ 160 0 160 0.00 Front-end Loader Operator
2018-07-03 TC from EC @ 160 0 160 0.00 Crusher Oper/Worker
2017-03-22 TC from EC @ 160 0 160 0.00 Utility Man
2017-03-22 EC @ 160 4 160 0.03 Utility Man
2017-03-22 TC @ 160 24 160 0.15 Scaling (mechanical)
2017-03-22 TC from EC @ 160 0 160 0.00 Scaling (mechanical)
2017-03-22 EC @ 160 9 160 0.06 Scaling (mechanical)
2017-03-22 TC from EC @ 160 0 160 0.00 Drill Operator, Rotary
2017-03-22 TC @ 160 7 160 0.04 Crusher Oper/Worker
2017-03-22 TC @ 160 10 160 0.06 Front-end Loader Operator
2017-03-22 TC @ 160 14 160 0.09 Utility Man
2017-03-22 TC from EC @ 160 0 160 0.00 Truck Driver
2017-03-22 TC from EC @ 160 0 160 0.00 Crusher Oper/Worker
2017-03-22 TC @ 160 49 160 0.31 Drill Operator, Rotary
2017-03-22 EC @ 160 9 160 0.06 Truck Driver
2017-03-22 TC from EC @ 160 0 160 0.00 Front-end Loader Operator
2017-03-22 EC @ 160 7 160 0.04 Front-end Loader Operator
2017-03-22 TC @ 160 22 160 0.14 Blaster, Powder Gang
2017-03-22 TC @ 160 31 160 0.19 Truck Driver
2017-03-22 EC @ 160 4 160 0.03 Crusher Oper/Worker
2017-03-22 TC from EC @ 160 0 160 0.00 Blaster, Powder Gang
2017-03-22 EC @ 160 25 160 0.16 Drill Operator, Rotary
2017-03-22 EC @ 160 10 160 0.06 Blaster, Powder Gang
2016-08-31 TC from EC @ 160 0 160 0.00 Scaling (mechanical)
2016-08-31 TC @ 160 19 160 0.12 Truck Driver
2016-08-31 TC from EC @ 160 0 160 0.00 Front-end Loader Operator
2016-08-31 EC @ 160 12 160 0.08 Truck Driver
2016-08-31 TC @ 160 138 160 0.86 Front-end Loader Operator
2016-08-31 EC @ 160 38 160 0.24 Front-end Loader Operator
2016-08-31 EC @ 160 16 160 0.10 Scaling (mechanical)
2016-08-31 TC @ 160 24 160 0.15 Scaling (mechanical)
2016-08-31 TC from EC @ 160 0 160 0.00 Truck Driver
Showing 100 of 269 laboratory readings: every over-limit reading, then the most recent. MSHA reads one air sample several times, so readings outnumber the samples counted above. The full set is in MSHA's Personal Health Samples file.

Area samples (mill and shop air)

Last sampled: 2026-04-15
4
samples
Show the individual readings (9)
Date Contaminant Concentration Limit Conc / limit Area sampled
2026-04-15 EC @ 160 0 UG ACTIVE MINING
2026-04-15 TC @ 160 0 UG ACTIVE MINING
2022-07-26 TC @ 160 0 UG ACTIVE MINING
2022-07-26 EC @ 160 0 UG ACTIVE MINING
2021-05-12 TC @ 160 0 UG TRAVEL/HAULAGE
2021-05-12 EC @ 160 0 UG TRAVEL/HAULAGE
2008-09-11 TC from EC @ 160 0 UG ACTIVE MINING
2008-09-11 TC @ 160 50 UG ACTIVE MINING
2008-09-11 EC @ 160 25 UG ACTIVE MINING
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Fort Dodge Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Iowa, metal and nonmetal mining averaged 1.72 cases per 100 workers that year.
Year total case rate days-away fatal
2025 0.00 0.00 0.000
2024 3.54 0.00 0.000
2023 0.00 0.00 0.000
2022 1.74 0.00 0.000
2021 3.69 0.00 0.000
2020 1.71 0.00 0.000
2019 0.00 0.00 0.000
2018 1.51 0.00 0.000
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Welp & Mc Carten Inc 1950 to 1980
  2. Welp & Mc Carten Inc 1980 to 1986
  3. Martin Marietta Aggregates 1986 to 2005
  4. Martin Marietta Materials, Inc. 2005 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 47
2025 49
2024 44
2023 44
2022 43
2021 42
2020 51
2019 53
2018 50
2017 49
2016 39
2015 31
2014 30
2013 31
2012 31
2011 33
2010 29
2009 29
2008 30
2007 26
2006 27
2005 27
2004 25
2003 26
2002 31
2001 32
2000 34
Source: MSHA quarterly employment and production, updated weekly.

Fort Dodge Mine sits in Webster County, Iowa, where the Census mining category is 0.6% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Webster County, Iowa · Population 36,848
0.6%
Mining share of county employment
$68,054
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 27,180 3 0 110.4
2026 Q1 25,811 3 0 116.2
2025 Q4 23,458 0 0 0.0
2025 Q3 22,087 4 1 181.1
2025 Q2 29,743 0 0 0.0
2025 Q1 26,022 4 0 153.7
2024 Q4 29,707 3 1 101.0
2024 Q3 28,229 1 0 35.4
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 27,693 0 0 0.0
2024 Q1 27,206 1 0 36.8
2023 Q4 28,184 1 0 35.5
2023 Q3 28,777 3 0 104.2
2023 Q2 29,533 4 0 135.4
2023 Q1 28,237 2 0 70.8
2022 Q4 28,357 5 1 176.3
2022 Q3 30,234 3 0 99.2
2022 Q2 30,456 2 0 65.7
2022 Q1 25,787 2 0 77.6
2021 Q4 29,191 1 0 34.3
2021 Q3 30,297 6 0 198.0
2021 Q2 28,751 3 0 104.3
2021 Q1 20,201 4 0 198.0
2020 Q4 25,920 2 0 77.2
2020 Q3 32,174 4 0 124.3
2020 Q2 32,376 4 0 123.5
2020 Q1 26,577 2 0 75.3
2019 Q4 32,983 6 0 181.9
2019 Q3 35,200 3 0 85.2
2019 Q2 33,869 4 0 118.1
2019 Q1 26,076 8 0 306.8
2018 Q4 33,224 7 1 210.7
2018 Q3 38,066 2 0 52.5
2018 Q2 33,389 7 1 209.6
2018 Q1 27,664 9 4 325.3
2017 Q4 31,165 4 2 128.3
2017 Q3 36,196 7 0 193.4
2017 Q2 32,104 8 0 249.2
2017 Q1 26,960 11 1 408.0
2016 Q4 27,131 9 0 331.7
2016 Q3 32,366 3 0 92.7
2016 Q2 27,981 5 0 178.7
2016 Q1 18,056 3 0 166.1
2015 Q4 24,204 3 1 123.9
2015 Q3 25,303 5 1 197.6
2015 Q2 21,755 6 2 275.8
2015 Q1 19,466 3 0 154.1
2014 Q4 23,852 2 0 83.9
2014 Q3 22,786 5 0 219.4
2014 Q2 20,543 4 0 194.7
2014 Q1 16,939 10 3 590.4
2013 Q4 22,549 8 1 354.8
2013 Q3 22,840 8 1 350.3
2013 Q2 21,118 6 0 284.1
2013 Q1 20,096 6 0 298.6
2012 Q4 22,579 11 0 487.2
2012 Q3 22,351 2 1 89.5
2012 Q2 20,893 2 0 95.7
2012 Q1 20,207 6 1 296.9
2011 Q4 22,433 3 0 133.7
2011 Q3 23,391 7 1 299.3
2011 Q2 19,160 4 2 208.8
2011 Q1 15,913 5 1 314.2
2010 Q4 21,491 17 7 791.0
2010 Q3 20,346 25 8 1228.7
2010 Q2 20,977 3 0 143.0
2010 Q1 13,373 4 0 299.1
2009 Q4 18,240 6 3 328.9
2009 Q3 25,666 0 0 0.0
2009 Q2 18,107 2 0 110.5
2009 Q1 15,303 0 0 0.0
2008 Q4 20,260 0 0 0.0
2008 Q3 22,811 8 0 350.7
2008 Q2 18,178 0 0 0.0
2008 Q1 13,853 2 1 144.4
2007 Q4 18,797 2 0 106.4
2007 Q3 18,402 6 2 326.1
2007 Q2 16,229 2 1 123.2
2007 Q1 13,409 8 2 596.6
2006 Q4 16,883 2 0 118.5
2006 Q3 18,043 1 0 55.4
2006 Q2 15,275 0 0 0.0
2006 Q1 9,789 2 0 204.3
2005 Q4 14,878 1 0 67.2
2005 Q3 18,023 4 3 221.9
2005 Q2 16,582 1 0 60.3
2005 Q1 14,398 1 0 69.5
2004 Q4 19,614 2 0 102.0
2004 Q3 16,761 2 0 119.3
2004 Q2 14,754 1 0 67.8
2004 Q1 8,737 0 0 0.0
2003 Q4 16,107 0 0 0.0
2003 Q3 19,759 3 0 151.8
2003 Q2 14,457 6 0 415.0
2003 Q1 8,761 5 0 570.7
2002 Q4 16,226 0 0 0.0
2002 Q3 18,106 2 0 110.5
2002 Q2 18,022 0 0 0.0
2002 Q1 18,187 4 0 219.9
2001 Q4 19,479 0 0 0.0
2001 Q3 15,539 0 0 0.0
2001 Q2 21,748 2 0 92.0
2001 Q1 10,617 1 0 94.2
2000 Q4 16,587 2 0 120.6
2000 Q3 17,105 0 0 0.0
2000 Q2 17,737 2 0 112.8
2000 Q1 19,108 13 3 680.3
No fatalities recorded at this mine.

Reportable incidents

72 on file

2025 · 2 incidents

April 23, 2025 IA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Martin Marietta Materials, Inc. · Caught in, under or between a moving and a stationary object

Technician was working with a man lift and it became stuck. Technician was pushing at the end of the man lift to get it unstuck and the slide was out a bit and when pushing on that it slid in and it cut/split their finger while servicing a 775 Cat at the start of the shift.

April 20, 2025 IA · Metal/Non-Metal FIRE
Martin Marietta Materials, Inc. · Accident type, without injuries

Mid American Electrical insulator failed causing an arc flash, power wire fell to the ground. No damage/injury to the mine site or employees.

2024 · 2 incidents

September 18, 2024 IA · Metal/Non-Metal quality control technician, laboratory technician, laboratory assistant SLIP OR FALL OF PERSON
Martin Marietta Materials, Inc. · Fall onto or against objects

Employee fell into the frame of a conveyor while removing tail pulley guard.

July 18, 2024 IA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Martin Marietta Materials, Inc. · Over-exertion in lifting objects

Employee was changing return rollers when the employee felt lower back pain. Physical Therapy and restrictions were prescribed by the clinic. Injury became reportable on 07/23/2024.

2022 · 1 incident

June 24, 2022 IA · Metal/Non-Metal truck driver HANDTOOLS (NONPOWERED)
Martin Marietta Materials, Inc. · Struck by... (Not Elsewhere Classified)

Employee was using a utility knife while performing patch work on a conveyor belt. While cutting, the utility knife slipped, and cut the employees left thumb just below the nail. The employee received 3 stitches.

2021 · 3 incidents

July 12, 2021 IA · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey HANDLING OF MATERIALS
Martin Marietta Materials, Inc. · Over-exertion (Not Elsewhere Classified)

Employee was dragging an ANFO hose along the front of the heading and stumbled. As they regained balance, they strained lower back. Employee began physical therapy on 8/20/21 making this a reportable injury.

March 25, 2021 IA · Metal/Non-Metal inspector HANDLING OF MATERIALS
Martin Marietta Materials, Inc. · Caught in, under or between a moving and a stationary object

On the evening of Thursday, March 25th, 2021, the night shift was changing drive belts on the (secondary) crusher. As they were spinning the sheave putting the last belts on, the employee's hand got pinched between the sheave spoke and the motion sensor.

February 1, 2021 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Martin Marietta Materials, Inc. · Fall to the walkway or working surface

Mine operator was notified approximately 4 hours later of a customer truck driver that slipped and fell on the ground.

2020 · 1 incident

August 26, 2020 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Martin Marietta Materials, Inc. · Fall from machine

At 4:35 AM on 8/26/20 EE arrived on site prior to shift start to retrieve items from 769D Cat haul truck. EE was at 2nd rung from top of ladder, lost grip w/left hand on grab bar located below windshield. EE swung out towards the right & fell off of haul truck, landed on ground. Compression fracture to T12 vertebra.

2019 · 1 incident

June 17, 2019 IA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Martin Marietta Materials, Inc. · Fall onto or against objects

Employee was installing a hood on a 336F excavator. The hood shifted when employee was installing it and it bumped employee and knocked employee into the truck. Employee braced self with R. hand which jammed shoulder. Employee has not gone to the doctor yet, but will be soon.

2018 · 1 incident

December 13, 2018 IA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
Martin Marietta Materials, Inc. · Caught in, under or between a moving and a stationary object

Employees working to install new backstop and speed reducer for underground conveyor. While lifting machine out of shipping crate with hoist, the component rotated, causing a bolt to catch an employee's right hand against the shipping crate, lacerating the skin under the glove.

2016 · 4 incidents

October 7, 2016 IA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Martin Marietta Materials, Inc. · Fall to the walkway or working surface

Employee slipped and fell to the ground landing on knee injuring the knee cap. Employee required physical therapy effective 11/21/2016 making this a reportable.

September 30, 2016 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Martin Marietta Materials, Inc. · Struck by... (Not Elsewhere Classified)

Employee was changing screens and using a hammer. EE missed the target with the hammer and hit right ring finger on a screen wire causing a fracture in finger.

April 11, 2016 IA · Metal/Non-Metal scoop tram operator, load/haul/dump operator POWERED HAULAGE
Martin Marietta Materials, Inc. · Struck against a moving object

Employee veered into the face with haul truck causing the steering wheel to jerk back and forth. This caused a hairline fracture in EE's wrist.

2015 · 2 incidents

February 20, 2015 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Martin Marietta Materials, Inc. · Struck by... (Not Elsewhere Classified)

Employee was swinging a 4# sledgehammer and came into contact with his left middle finger causing a small fracture under his nail.

January 26, 2015 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Martin Marietta Materials, Inc. · Fall onto or against objects

Employee was climbing down off of his haul truck and lost his three points of contact and missed the last rung of his ladder. He fell into the side of the truck injuring his left shoulder.

2012 · 1 incident

March 20, 2012 IA · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey HANDTOOLS (NONPOWERED)
Martin Marietta Materials, Inc. · Struck by... (Not Elsewhere Classified)

EE was loading holes at an underground bench and slitting sticks of powder. The utility knife slipped penetrating a kevlar glove causing a laceration at the base of his left thumb. The injury required 8 stitches to close.

2009 · 1 incident

April 14, 2009 IA · Metal/Non-Metal pumper POWERED HAULAGE
Martin Marietta Materials, Inc. · Struck against a moving object

EE was cleaning mud on the decline to the portal. Some of the mud spilled on the road and ee was cleaning it up with a skid loader. Bucket was too low and it hit the steel grate over the road. EE was jerked to a complete stop and dislocated his right shoulder. This incident was a first aid only incident until 5/1/2009 at which time he was sent to see a physical therapist.

2007 · 2 incidents

September 8, 2007 IA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator EXPLODING VESSELS UNDER PRESSURE
Martin Marietta Materials, Inc. · Struck by... (Not Elsewhere Classified)

EE was holding a hydraulic hose that had a pin hole in it. When the hose pressurized it shot oil into the employee's right thumb.

August 9, 2007 IA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator DISORDERS (PHYSICAL AGENTS)
Martin Marietta Materials, Inc. · Contact with heat

EE was cleaning a catwalk and became overheated and began to feel sick to his stomach.

2006 · 3 incidents

August 11, 2006 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Martin Marietta Materials, Inc. · Struck by falling object

Injured employee was helping install a guard and a coworker dropped the guard hitting him on the top of his left forearm causing a three corner laceration requiring thirty two stitches to close.

August 2, 2006 IA · Metal/Non-Metal ledgeman/hand, quarry man POWERED HAULAGE
Martin Marietta Materials, Inc. · Caught in, under or between a moving and a stationary object

Injured employee suffered a pinched finger. His finger was xrayed and no bone fracture was found. He was released to full duty with a follow up visit scheduled for two weeks. After repeated follow up visits to the doctor with no medical treatment, he was then scheduled for physical therapy. At this time we feel his condition became reportable.

June 19, 2006 IA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Martin Marietta Materials, Inc. · Struck by... (Not Elsewhere Classified)

Employee was helping coworkers manhandle a section of screen into a screen box. Injured employee lost his balance and cut his left hand with the hook on the sceen section. He was not wearing gloves at the time of his injury.

2004 · 1 incident

March 30, 2004 IA · Metal/Non-Metal drill operator STRIKING OR BUMPING
Martin Marietta Aggregates · Struck against stationary object

EE WAS WORKING ON DRILL THAT HE RUNS IN THE SHOP. HE HAD BEEN BENT OVER & WHEN HE WENT TO STAND UP HIS PANT LEG CAUGHT & HE LOOKED & THEN LOOKED BACK. WHEN HE LOOKED BACK HE RAN HIS HEAD INTO THE BOOM OF THE DRILL CAUSING A LACERATION TO HIS LEFT EYEBROW THAT REQUIRED SUTURES TO CLOSE.

2003 · 2 incidents

June 9, 2003 IA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Martin Marietta Aggregates · Over-exertion (Not Elsewhere Classified)

EE WAS REPLACING A PLATE THAT CLOSES THE SECOND SCREEN DECK WHEN HE SUFFERED A GROIN PULL. UPON CLOSER EXAMINATION RESULTING FROM PROLONGED DIS COMFORT THE EE WAS DIAGNOSED WITH A INGUINAL HERNIA. THE EE RECEIVED SURGERY TO REPAIR HIS CONDITION 8-6-03.

January 3, 2003 IA · Metal/Non-Metal truck driver SLIP OR FALL OF PERSON
Martin Marietta Aggregates · Fall onto or against objects

EE WAS GETTING OFF OF HIS STOCKPILE TRUCK WHEN HE SLIPPED ON ICY GROUND & HIT HIS LEFT KNEE ON THE FUEL TANK STEP. THIS RESULTED IN A CONTUSION. ORIGINALLY THIS INCIDENT WAS THOUGHT TO BE A FIRST AID ONLY BUT HE HAS BEEN DOWNGRADED TO MEDICAL/RESTRICTED DUTY. 20 DAYS INTO THE RESTRICTION THIS EE WAS LAID OFF.

2002 · 5 incidents

November 6, 2002 IA · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey SLIP OR FALL OF PERSON
Martin Marietta Aggregates · Over-exertion (Not Elsewhere Classified)

EE WAS LOADING THE BOTTOM HOLES OF A FACE SHOT WHEN HE ALMOST TRIPPED WHILE MOVING BACKWARD. IN HIS ATTEMPT TO KEEP FROM FALLING THE EE STRAINED HIS RIGHT HIP AND SURROUNDING TISSUE.

August 26, 2002 IA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Martin Marietta Aggregates · Over-exertion (Not Elsewhere Classified)

STEPPED ON SIDE OF ROCK. TWISTED ANKLE.

July 16, 2002 IA · Metal/Non-Metal section foreman, bullgang foreman, labor foreman, leadman, shift boss POWERED HAULAGE
Martin Marietta Aggregates · Caught in, under or between (Not Elsewhere Classified)

BEING RAISED IN MAN BASKET TO INSPECT CONVEYOR. FORKLIFT MAST CAUGHT CONVEYOR FRAME. CONVEYOR SLIPPED, PINCHING FINGER AND THUMB. NO PERMANENT DAMAGE.

June 20, 2002 IA · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey HANDLING OF MATERIALS
Martin Marietta Aggregates · Over-exertion in lifting objects

EMPLOYEE APPARENTLY SUFFERED BACK STRAIN FROM REPETIVE LIFTING OF EXPLOSIVES BAGS AND BOXES. EMPLOYEE DID NOT INITIALLY REPORT HIS INJURY TO MANAGEMENT. HE SOUGHT MEDICAL ATTENTION FROM HIS PE RSONAL DOCTOR WHO PLACED HIM ON WORK RESTRICTION. HE THEN REPORTED HIS INJURY, WAS TAKEN TO THE COMPANY DOCTOR WHO TOOK OVER TREATMENT.

January 8, 2002 IA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Martin Marietta Aggregates · Struck by falling object

EE WAS HELPING REMOVE HUNG UP MATERIAL FROM THE PRIMARY IMPACT CRUSHER WHEN HE WAS STRUCK BY A ROCK CAUSING A WOUND THAT REQUIRED STITCHES TO CLOSE.

2001 · 4 incidents

October 21, 2001 IA · Metal/Non-Metal miner, nec MACHINERY
Martin Marietta Aggregates · Struck against stationary object

HAND SCALING OUT OF MANLIFT. LARGE LOOSE FELL ONTO MANLIFT BOOM. BOOM & GASKET WERE PUSHED DOWNBY THE WEIGHT OF THE ROCK & THEN CATAPULTED EE INOT THE BACK. EE HIT BACK WITH HEAD (HARD HAT HAD FALLEN OFF) CAUSING 3 LACERATION TO THE TOP OF HIS SKULL

August 9, 2001 IA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Martin Marietta Aggregates · Over-exertion (Not Elsewhere Classified)

MECHANIC WAS MOVING OIL DRUMS BY HAND AND STRAINED GROIN.

March 20, 2001 IA · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey MACHINERY
Martin Marietta Aggregates · Struck by... (Not Elsewhere Classified)

2 EMPLOYEES WERE CUTTING TREES WITH A CHAIN SAW. 1 EE WAS PUSHING ON THE TREE WHILE THE OTHER EE WITH THE CHAIN SAW TRIED TO FREE IT FROM TREE. WHEN THE TREE BEGAN TO FALL THE EMPLOYEE PUSHING ON THE TREE TURNED AWAY FROM THE TREE AND DROPPED HIS GLOVED HAND INTO THE PATH OF THE CHAIN SAW BLADE RESULTING IN 3 LACERATIONS TO HIS RT WRIST REQUIRING 10 STITCHES.

2000 · 1 incident

January 5, 2000 IA · Metal/Non-Metal miner, nec HANDLING OF MATERIALS
Martin Marietta Aggregates · Over-exertion (Not Elsewhere Classified)

EE WAS CLIMBING ON THE STEPS OF HIS HAUL UNITWHEN HE FELT A PAIN IN HIS BACK AS HE LIFTED HIS LEFT FOOT TO STEP ON THE ACCESS LADDER EE HAD A PREXISTING CONDTION WHICH WAS APPARENTLY AGGRAVA TED BY CLIMBING INTO HIS HAUL UNIT. HIS CONDITION WAS INITIALLY TREATED 1ST AID & HAS NOW BECOMEA MEDICAL REPORTABLE INCIDENT

1999 · 2 incidents

October 19, 1999 IA · Metal/Non-Metal driller operator MACHINERY
Martin Marietta Aggregates · Over-exertion (Not Elsewhere Classified)

EE HAS ALLEGED WORK RELATED CONDITION CALLED TENNIS ELBOW FROM OPERATING A DOWN HOLE DRILL. THIS CONDITION WAS ORIGINALLY TREATED AS A FIRST AID BUT IT HAS NEW BECOME A REPORTABLE INCIDENT.

January 1, 1999 IA · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey DISORDERS (REPEATED TRAUMA)
Martin Marietta Aggregates · Over-exertion (Not Elsewhere Classified)

EE COMPLAINED OF HAND CRAMPING AND FINGERS STICKING TO THE PALM OF HIS RIGHT HAND WHEN HE MADE A FIST. CO. DR. DIAGNOSED HIS CONDITION AS "TRIGGER FINGER." EE WAS TREATED 1-15-99 WITH FOLLOWUP TREATMENT IN TWO WEEKS FOLLOWING.

1998 · 4 incidents

October 5, 1998 IA · Metal/Non-Metal FALL OF ROOF OR BACK
Martin Marietta Aggregates · Accident type, without injuries

APPROX 5000 LBS OF ROCK FELL OFF THE CEILING STRIKING A FUEL TRAILER AND DOWN HOLE AIR COMPRESSOR. NO ONE WAS INJURED IN THIS ROOF FAL THE DRILLOPERATOR WAS STANDING BY THE COMPRESSOR FELT SOM E ROCK DUST AND RAN AWAY. THIS SAVED HIM FROM INJURY BY THE FALLING MATERIAL. GREATER CARE WILL BE TAKEN IN FUTURE TO AVOID LOOSE MATERIAL BY SCALING MORE.

June 30, 1998 IA · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey HANDLING OF MATERIALS
Martin Marietta Aggregates · Struck against stationary object

EMPLOYEE JAMMED LITTLE FINGER OG RIGHT HAND ON LOCK COVER WHEN UNLOCKING AN EXPLOSIVE MAGAZINE.

June 3, 1998 IA · Metal/Non-Metal truck driver POWERED HAULAGE
Martin Marietta Aggregates · Struck against a moving object

EMPLOYEE DROVE A LOADED 35 TON COAL HAUL UNIT INTO A PILLAR AT THE UNDERGROUND MINE. HE SUFFERED A CRACKED LEFT KNEE CAP WHICH REQUIRED A FULL LEG CAST.

1997 · 5 incidents

November 5, 1997 IA · Metal/Non-Metal drill operator HANDLING OF MATERIALS
Martin Marietta Aggregates · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE WAS PULLING ON A V BELT ATEMPTING TO STRAIGHTEN THEM INTO THIER PROPER SHEAVE GROVES. HE GOT HIS HAND TO CLOSE TO THE SHEAVE AND PINCHED HIS SMALL RIGHT FINGER BETWEEN THE BELT AND TH E GROVE.

October 9, 1997 IA · Metal/Non-Metal laborer, bull gang, parts runner, roustabout, roof trimmer/scaler HANDLING OF MATERIALS
Martin Marietta Aggregates · Struck against stationary object

EMPLOYEE RAN HIS HAND ACROSS THE TOP OF A WELD ROD CAN AND CUT HIMSELF. HE TOLD HIS LEAD PERSON HE DID NOT NEED TO GO TO THE DOCTOR. HE WENT HOME AT THE END OF THE SHIFT AND RACKED HIS YARD. H IS HAND BEGAN TO BLEED AND HE WENT OT A LOCAL EMERGENCY ROOM FOR TREATMENT. HE RECEIVED A TETNUS SHOT AND 5 STITCHES.

August 7, 1997 IA · Metal/Non-Metal truck driver HANDLING OF MATERIALS
Martin Marietta Aggregates · Caught in, under or between (Not Elsewhere Classified)

EMP WAS PULLING LOOSE ROCKS OUT OF PLUGGED PRIMARY CRUSHER WHEN ONE SLIPPED THROUGH HIS UNGLOVED HAND AND PINCHED HIS THUMB BETWEEN THE ROCK AND THE DOOR WAY.

June 12, 1997 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Martin Marietta Aggregates · Struck against a moving object

EE'S HEAD CAME IN CONTACT WITH THE CEILING OF HIS HAUL TRUCK. EE ALLEGES THIS CAUSED HIM TO HAVE A PINCHED NERVE IN HIS NECK.

1996 · 2 incidents

March 26, 1996 IA · Metal/Non-Metal bull gang foreman, labor foreman, leadman, section foreman, shift boss HANDTOOLS (NONPOWERED)
Martin Marietta Aggregates · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS WORKIGN REMOVING THE VIBRATOR FROM THE IMPACT FEEDER UNDER GROUND AT FT. DODGE MINE. WHEN UNIT CAME LOOSE IT CAUSED A COME-A-LONG TO JUMP AND THE HANDLE HIT THE EMPLOYEE IN THE L EFT HAND FRACTURING A BONE IN THAT HAND.

January 31, 1996 IA · Metal/Non-Metal scoop tram operator, load/haul/dump operator SLIP OR FALL OF PERSON
Martin Marietta Aggregates · Fall from machine

EMPLOYEE WAS STARTING TO WORK ON HIS LOADER AND WAS GETTING DOWN TO GET TOOLS. WHEN HE STEPPED FROM HIS LOADER ONTO A STEP LADDER HIS FOOT SLIPPED CAUSING HIM TO FALL APPROX. 4 FEET TO THE CEM ENT FLOOR FRACTURING HIS RIGHT LEG NEAR THE HIP SOCKET.

1995 · 3 incidents

April 26, 1995 IA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDTOOLS (NONPOWERED)
Martin Marietta Aggregates · Fall to the walkway or working surface

EMPLOYEE WAS USING A BAR (SPECIALLY DESIGNED FOR THIS PURPOSE) TO CLOSE A RAIL CAR DUMP DOOR. THE BAR SLIPPED CAUSING THE EMPLOYEE TO FALL HARD ON HIS BACK SIDE.

April 17, 1995 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Martin Marietta Aggregates · Caught in, under or between a moving and a stationary object

INJURED EMPLOYEE WAS WORKING WITH A SECOND EMPLOYEE CLOSING A RAIL CAR DUMP DOOR. INJURED EMPLOYEE CAUGHT HIS FINGER IN THE DOOR AS IT CLOSED CAUSING SMASHING /BROKEN BONE/ DISLOCATED KNUCKLE OF RIGHT INDEX FINGER.

March 23, 1995 IA · Metal/Non-Metal welder HANDLING OF MATERIALS
Martin Marietta Aggregates · Caught in, under or between a moving and a stationary object

EE WAS TRYING TO SLIDE A SHAFT ON A TABLE TOP TO MEET ANOTHER PIECE OF STEEL HE WAS GOING TO WELD. THE SHAFT SLID PAST THE TABLE FRAME WORK, DROPPED AND PINCHED HIS TWO FINGERS BETWEEN THE SHA FT AND THE FRAMEWORK.

1994 · 3 incidents

November 8, 1994 IA · Metal/Non-Metal bull gang foreman, labor foreman, leadman, section foreman, shift boss MACHINERY
Martin Marietta Aggregates · Contact with hot objects or substances

EE WAS LIGHTING A CUTTING TORCH TO CUT A PIECE OF STEEL. I AM PUSHING THE OXYGEN LEVER THE TORCH WENT OUT. THE EE BROUGHT THE TORCH TOWARD HIS BODY TO RELIGHT AT WHICH TIME THE TORCH PUFFED OU T A BALL OF FLAME THAT BURNED THE BACK OF HIS LEFT HAND.

May 24, 1994 IA · Metal/Non-Metal coal sampler HANDTOOLS (NONPOWERED)
Martin Marietta Aggregates · Contact with hot objects or substances

EE WAS DRYING A SAMPLY OF ROCK IN A PAN ON A GAS STOVE. HE PICKED UP THE PEN WITH A PAIR OF PLIERS, THE PAN SLIPPED AND HE BURNT HIS FINGERS.

May 23, 1994 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Martin Marietta Aggregates · Struck against a moving object

EE DROVE STOCK PILE TRUCK UNDER AN OVERHEAD CONVEYOR WITH THE DUMP BOX EXTENDED. THE DUMP BOX STRUCK THE CONVEYOR CAUSING THE TRUCK TO STOP SUDDENLY AND CAUSED THE EE S NECK TO BE STRAINED.

1993 · 2 incidents

October 27, 1993 IA · Metal/Non-Metal truck driver POWERED HAULAGE
Martin Marietta Aggregates · Struck against a moving object

HAUL TRUCK DRIVER SERVICED HIS TRUCK AND STARTEDDRIVING. WHEN HE CONTINUED DRIVING HIS BACK BECAME SORE.

March 25, 1993 IA · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey HANDTOOLS (NONPOWERED)
Martin Marietta Aggregates · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS CUTTING AHOLE IN THE TOP OF A GREASE CAN LOCKING KNIFE CLOSED WHILE HE WAS CUTTING & STRUCK THE LITTLF FINGER ON HIS RT HAND LACERTION EQUIRED STITCHES

1992 · 2 incidents

August 20, 1992 IA · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey HANDLING OF MATERIALS
Martin Marietta Aggregates · Struck by... (Not Elsewhere Classified)

55023ATED THAT HE SCRATCHED HIS RIGHT THUMB ON ROCK OR PIECE OF METAL. HIS THUMB SWELLED UP AND HE WENT TO THE DR FOR TREATMENT THE DR PRESCRIBED AN ANTIBIOTIC WHICH HE HAD AN ALLERGIC REACTIO 50360AND MISSED ONE DAY OF WORK BECAUSE HE BECOME ILL.

June 30, 1992 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Martin Marietta Aggregates · Struck against a moving object

EMPL TRAVELLING TO BIN TO LOAD TRUCK STRUCK AN OVERHEAD CONVEYOR WITH THE RAISED BED OF STOCKPILE TRUCK.INJURIES WERE VARIOUS MINOR CONTUSIONS.

1991 · 3 incidents

May 22, 1991 IA · Metal/Non-Metal electrician, lineman SLIP OR FALL OF PERSON
Martin Marietta Aggregates · Struck against stationary object

EMPLOYEE WAS PULLING UP ELECTRICAL CORD ON A5TURBINE PUMP HE SLIPPED & GRABBED A PIECE OF ANGLE IRON TO CATCH HIMSELF HE CUT THE RING FINGER ON HIS LEFT HAND

April 30, 1991 IA · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey HANDLING OF MATERIALS
Martin Marietta Aggregates · Struck by... (Not Elsewhere Classified)

EE WAS CLEANING UP AROUND THE PRIMARY WHEN A ROCK MOVED AND STRUCK HIS FINGER. INJURY RESULTED IN A LACERATED SECOND FINGER ON HIS LEFT HAND.

January 22, 1991 IA · Metal/Non-Metal laborer, bull gang, parts runner, roustabout, roof trimmer/scaler SLIP OR FALL OF PERSON
Martin Marietta Aggregates · Over-exertion (Not Elsewhere Classified)

EMPL STATED THAT HE WAS ATTEMPTING TO FREE JAM IN HOPPER WITH PRY BAR. HE TRIED TO STEP BACK OUT OF WAY WHEN ONE OF ROCKS STARTED TO MOVE. HE CAUGHT FOOT ON ROCK & TWISTED RIGHT KNEE.

1990 · 2 incidents

October 29, 1990 IA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDTOOLS (NONPOWERED)
Martin Marietta Aggregates · Over-exertion (Not Elsewhere Classified)

EE STATED HE WAS REACHING OVER THE TIRE TO CHANGE OIL FILTER ON HIS LOADER AS HE WAS REACHING HE STATED HE STRAINED HIS LOWER BACK.

1989 · 1 incident

August 9, 1989 IA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech DISORDERS (REPEATED TRAUMA)
Martin Marietta Aggregates · Rubbed or abraded

EMPLOYEE STATED THAT HE WAS HAVING PAIN IN HIS KNEES WHEN HE WOULD KNEEL UNDER EQUIPMENT TO DO MECHANICAL WORK. HE STATED IT HAD BOTHERED HIM FOR THE LAST 2 WEEKS. IT WAS DIAGNOSED AS SEPTIC BURSITIS IN BOTH KNEES.

1988 · 2 incidents

August 1, 1988 IA · Metal/Non-Metal section foreman, bullgang foreman, labor foreman, leadman, shift boss HANDTOOLS (NONPOWERED)
Martin Marietta Aggregates · Struck against stationary object

EMPLOYEE WAS USING A HAND SCALING BAR TO REMOVE LOOSE MATERIAL FROM THE BACK,THE SCALING BAR SLIPPED CAUSING HIM TO HIT THE BACK WITH HIS AHND AND THE BAR THIS CAUSED A CUT ON HIS HAND AND THE BAR.THIS CAUSED A CUT ON THE RIGHT INDEX FINGER.REQUIRED 4 STITCHES TO CLOSE THE CUT.

July 21, 1988 IA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Martin Marietta Aggregates · Over-exertion in lifting objects

EMPLOYEE WAS LIFTING A SYNTRON CONTROL BOX INTO THE TRUNK OF A LOADER VEHICLE.THIS CAUSED HIM TO OVEREXTEND HIS REACH RESULTING IN APULLED MUSCLE IN HIS LOWER ABCK.

1986 · 3 incidents

August 15, 1986 IA · Metal/Non-Metal driller operator MACHINERY
Martin Marietta Aggregates · Struck by flying object

4 EMPLOYEES HAD3EXTENDED 6 IN AIRLINE FOR DRILL THEY ADDED 4 SECTIONS I NAME STAYED WITH THE JOB, TURNED ON AIR COMPRESSOR TO CHECK LINES FOR LEAKS STARTED TO BLEED AIR LINE WHEN LAST SECT SECTION OF PIPE3BLEW LOOSE THIS RESULTED IN A COMPOUND FRACTURE TO RIGHT THIGH

August 11, 1986 IA · Metal/Non-Metal superintendent HANDLING OF MATERIALS
Martin Marietta Aggregates · Struck by... (Not Elsewhere Classified)

I NAME WAS GIVI3G TASK TRAINING TO AN EMPLOYEE ON HOW TO RUN THE 560 HOUGH HE WENT UP THE LADDER AND PULLED ON THE DOOR WHICH WAS WEDGED ONTO BACK END OF LOADER ALL OF A SUDDEN DOOR SWUNG LOOS HITTING I NAME 3N THE HEAD THIS REQUIRED 5 STITCHES TO CLOSE THE WOUND

May 22, 1986 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Martin Marietta Aggregates · Struck against a moving object

TRUCK WAS PULLI3G UP TO THE SCALE HAD TO CROS RAILROAD TRACKS REAR OF TRAILER WAS STRUCK BY TRAIN

1985 · 1 incident

August 20, 1985 IA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Welp & Mc Carten Inc · Caught in, under or between (Not Elsewhere Classified)

EMP HAD FINISHE8 FILLING STOCKPILE TRUCK AND JUMPED OFF CATCHING HIS LEFT RING FINGER ON THE TRUCK BOX WITH HIS RING. IT CUT HIS FINGER AND TORE TENDON