Mining Incidents

FRIDAY MINE: 29 MSHA citations Metal/Non-Metal

Elk Range Minerals, LLC · Underground
Controlled by Elk Range Mining Pty Ltd
Oro Grande, Idaho County, ID  ·  NonProducing
MSHA Mine ID: 1002265

FRIDAY MINE has $4K in proposed MSHA penalties and $348 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at FRIDAY MINE.

Fatalities
0
Total incidents
3
Years on record
2019–2025
Latest incident
Jul 2025
Compliance record
MSHA citations since 2016
29
citations
1
significant & substantial
$3,694
proposed penalties
$3,346
paid to date
91% of proposed penalties paid to date, a $348 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2016
43
inspections on record
759
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 759 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

FRIDAY MINE has $4K in proposed MSHA penalties and $348 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$4K
proposed penalties
$4K
current assessed
$3K
paid to date
$348
outstanding
29 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2024-10-16.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
3.4%
significant & substantial
0.0%
high negligence or reckless
3.4%
reasonably likely or greater
58.6%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 20.7% low, 79.3% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2020-07-08, 6 years ago
2
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg1
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (2)
Date Contaminant Concentration Limit Conc / limit Occupation
2020-07-08 Unlisted Particulate, respirable, <1% Qtz 0.12 Laborer, Bullgang
2020-07-08 Respirable dust, <.1mg 0 Laborer, Bullgang
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

FRIDAY MINE recorded 0.00 reportable injury cases per 100 full-time workers in 2021.

Injury rate, 2021
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 1.87 and the all-US-mining average was 2.19 cases per 100 workers.
In Idaho, metal and nonmetal mining averaged 2.22 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. General Mining LLC 2016 to 2018
  2. Endomines Idaho LLC 2018 to 2026
  3. Elk Range Minerals, LLC 2026 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 5
2025 5
2024 5
2023 5
2022 8
2021 10
2020 14
2019 7
2018 2
2017 0
2016 3
Source: MSHA quarterly employment and production, updated weekly.

FRIDAY MINE sits in Idaho County, Idaho, where the Census mining category is 0.9% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Idaho County, Idaho · Population 17,120
0.9%
Mining share of county employment
$60,975
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 972 0 0 0.0
2026 Q1 850 0 0 0.0
2025 Q4 958 0 0 0.0
2025 Q3 1,290 0 0 0.0
2025 Q2 1,617 0 0 0.0
2025 Q1 1,585 0 0 0.0
2024 Q4 1,497 1 0 668.0
2024 Q3 1,710 0 0 0.0
Show 29 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 1,591 0 0 0.0
2024 Q1 1,542 0 0 0.0
2023 Q4 1,590 0 0 0.0
2023 Q3 1,542 1 0 648.5
2023 Q2 1,669 0 0 0.0
2023 Q1 1,913 0 0 0.0
2022 Q4 1,915 0 0 0.0
2022 Q3 1,995 0 0 0.0
2022 Q2 1,709 2 0 1170.3
2022 Q1 6,902 1 0 144.9
2021 Q4 10,325 0 0 0.0
2021 Q3 8,550 1 0 117.0
2021 Q2 6,010 1 0 166.4
2021 Q1 3,510 1 0 284.9
2020 Q4 3,414 2 0 585.8
2020 Q3 5,385 1 0 185.7
2020 Q2 7,067 1 1 141.5
2020 Q1 9,737 2 0 205.4
2019 Q4 2,997 1 0 333.7
2019 Q3 1,710 2 0 1169.6
2019 Q2 1,011 1 0 989.1
2019 Q1 1,408 1 0 710.2
2018 Q4 1,208 1 0 827.8
2018 Q3 1,180 0 0 0.0
2017 Q1 0 0 0
2016 Q4 200 3 0 15000.0
2016 Q3 680 0 0 0.0
2016 Q2 1,648 0 0 0.0
2016 Q1 628 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

3 on file

2025 · 1 incident

July 2, 2025 ID · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Endomines Idaho LLC · Fall to the walkway or working surface

While walking to another area to weed eat around tank house they slipped on loose dirt & spread eagled legs on either side of the berm causing them to fall forward and hit their face shield & hard hat on the ground causing their neck to pop backwards as well as their groin to hit the rocks/gravel on the berm. It was hot and dry conditions that day.

2022 · 1 incident

June 9, 2022 ID · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Endomines Idaho LLC · Struck against stationary object

EE & co-worker were fixing a fence, co-worker was holding the star picket post with foot & EE was hitting the post with a 20lb hammer. EE misjudged where the post was and skimmed right hand against the top of the post. The sharpness of the metal post & the momentum of EE's swing compounded the severity of the wound.

2019 · 1 incident

September 23, 2019 ID · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Endomines Idaho LLC · Caught in, under or between running or meshing objects

While cutting board with skilsaw the saw kicked back and made contact with the employee's left thumb causing a laceration. Employee was transported to hospital and laceration was treated with sutures and employee was released to normal duty.