Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← Back to search

Hall County Quarry: 2 MSHA citations Metal/Non-Metal

Controlled by Heidelberg Materials AG
Gainesville, Hall County, GA  ·  Abandoned
MSHA Mine ID: 0900087

Hall County Quarry has $115 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Hall County Quarry.

Fatalities
0
Total incidents
2
Years on record
1988–1999
Latest incident
Oct 1999
Compliance record
MSHA citations since 2000
2
citations
0
significant & substantial
$115
proposed penalties
$115
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
See Hanson Aggregates Southeast, Inc.'s full MSHA compliance history →
Inspection activity
MSHA inspections since 2000
13
inspections on record
129
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 129 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Hall County Quarry has $115 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$115
proposed penalties
$115
current assessed
$115
paid to date
$0
outstanding
2 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2004-09-22.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
0.0%
significant & substantial
50.0%
high negligence or reckless
0.0%
reasonably likely or greater
0.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 50.0% low, 0.0% moderate, 50.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2002-05-07, 24 years ago
1
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg1
Show the individual readings (1)
Date Contaminant Concentration Limit Conc / limit Occupation
2002-05-07 Respirable dust, <.1mg 0 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Hall County Quarry recorded 0.00 reportable injury cases per 100 full-time workers in 2003.

Injury rate, 2003
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 3.76 and the all-US-mining average was 4.43 cases per 100 workers.
In Georgia, metal and nonmetal mining averaged 2.31 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2003 * 0.00 0.00 0.000
2002 * 0.00 0.00 0.000
2001 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Gainesville Limestone Products Inc 1950 to 1999
  2. Hanson Aggregates East Inc 1999 to 2002
  3. Hanson Aggregates Southeast, Inc. 2002 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2007 0
2006 0
2005 0
2004 2
2003 10
2002 11
2001 9
2000 8
Source: MSHA quarterly employment and production, updated weekly.

Hall County Quarry sits in Hall County, Georgia, where the Census mining category is 0.1% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Hall County, Georgia · Population 208,395
0.1%
Mining share of county employment
$77,430
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2007 Q4 0 0 0
2007 Q3 0 0 0
2007 Q2 0 0 0
2007 Q1 0 0 0
2006 Q4 0 0 0
2006 Q3 0 0 0
2006 Q2 0 0 0
2006 Q1 0 0 0
Show 23 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2005 Q4 0 0 0
2005 Q3 0 0 0
2005 Q2 0 0 0
2005 Q1 0 0 0
2004 Q4 0 0 0
2004 Q3 0 1 0
2004 Q2 964 0 0 0.0
2004 Q1 1,315 0 0 0.0
2003 Q4 4,312 0 0 0.0
2003 Q3 5,612 0 0 0.0
2003 Q2 6,225 0 0 0.0
2003 Q1 6,406 0 0 0.0
2002 Q4 5,927 0 0 0.0
2002 Q3 5,726 0 0 0.0
2002 Q2 4,548 0 0 0.0
2002 Q1 4,394 0 0 0.0
2001 Q4 6,234 0 0 0.0
2001 Q3 5,252 0 0 0.0
2001 Q2 4,345 0 0 0.0
2001 Q1 4,506 0 0 0.0
2000 Q4 4,351 1 0 229.8
2000 Q3 4,090 0 0 0.0
2000 Q2 3,955 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

2 on file

1999 · 1 incident

October 9, 1999 GA · Metal/Non-Metal drill operator OTHER
Hanson Aggregates East Inc · Struck by flying object

EE WAS SHARPENING DRILL BIT WHEN WINDS BLEW PIECE OF HOT SILICA AROUND SAFETY GLASSES AND EMBEDDED ITSELF INTO EYE.

1988 · 1 incident

June 20, 1988 GA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Gainesville Limestone Products Inc · Caught in, under or between a moving and a stationary object

MASHED LEFT 5TH FINGER BETWEEN CRUSHER FRAME AND HEAD OF BOLTER REPAIRING CRUSHER.