citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
293 citations across 1,720 inspection hours.
Source: MSHA inspections data, updated weekly.
Haydite Mine has $79K in proposed MSHA penalties and $120 outstanding across 6 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$79K
proposed penalties
$74K
current assessed
$74K
paid to date
$120
outstanding
293 assessments are final orders; 6 contested dockets.
Of $28K in penalties contested before the Commission, $21K was upheld in final decisions.
As of the most recent assessment on 2018-11-07.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘContesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
23citations taken to the federal commission · 8% of citations on record
Settled
22 · 96%
Vacated or withdrawn
1 · 4%
93%
S&S designation survived the contest
ⓘCounts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 14 decided S&S contests · industry: 79%
20%
Penalty reduction in decided contests
$22K proposed, $18K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2017-02-19.
Contested penalties
ⓘA reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2018-06-19, 8 years ago
5%
of limit-tested samples over the exposure limit
55
samples
37
limit-tested
Most sampled contaminants
Quartz, respirable, >1% Qtz232 over
Respirable dust, <.1mg11
Arsenic fumes6
Beryllium fumes6
Show the individual readings (100)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2014-03-10
Quartz, respirable, >1% Qtz
1.55
0.97
1.60
Oiler, Greaser
2004-05-05
Quartz, respirable, >1% Qtz
1.27
0.86
1.48
Dry Screen Plant Operator
2018-06-19
Respirable dust, <.1mg
0
Electrician
2018-06-19
Respirable dust, <.1mg
0
Kiln/Dryer Operator
2018-06-19
Quartz, respirable, >1% Qtz
0.27
0.85
0.32
Dry Screen Plant Operator
2018-06-19
Respirable dust, <.1mg
0
Front-end Loader Operator
2018-06-19
Respirable dust, <.1mg
0
Laborer, Bullgang
2017-03-28
Chromium, insoluble
0
1
0.00
Welder, etc.
2017-03-28
Copper fumes
11.76
300
0.04
Welder, etc.
2017-03-28
Iron oxide fumes
1.92
20
0.10
Welder, etc.
2017-03-28
Lead fumes
0
450
0.00
Welder, etc.
2017-03-28
Magnesium oxide fumes
0
20
0.00
Welder, etc.
2017-03-28
Manganese fumes
0.17
5
0.03
Welder, etc.
2017-03-28
Molybdenum fumes
0
20
0.00
Welder, etc.
2017-03-28
Nickel fumes
0
3
0.00
Welder, etc.
2017-03-28
Vanadium fumes
0
50
0.00
Welder, etc.
2017-03-28
Zinc oxide fumes
0.01
10
0.00
Welder, etc.
2017-03-28
Arsenic fumes
0
1500
0.00
Welder, etc.
2017-03-28
Beryllium fumes
0
6
0.00
Welder, etc.
2017-03-28
Cadmium oxide fumes
0
100
0.00
Welder, etc.
2017-03-28
Chromium, insoluble
0
3
0.00
Welder, etc.
2017-03-28
Cobalt fumes
1.18
300
0.00
Welder, etc.
2017-03-28
Copper fumes
2.35
300
0.01
Welder, etc.
2017-03-28
Iron oxide fumes
2.51
20
0.13
Welder, etc.
2017-03-28
Lead fumes
0
450
0.00
Welder, etc.
2017-03-28
Magnesium oxide fumes
0
20
0.00
Welder, etc.
2017-03-28
Manganese fumes
0.32
5
0.06
Welder, etc.
2017-03-28
Molybdenum fumes
0
20
0.00
Welder, etc.
2017-03-28
Nickel fumes
0
3
0.00
Welder, etc.
2017-03-28
Vanadium fumes
0
50
0.00
Welder, etc.
2017-03-28
Zinc oxide fumes
0
10
0.00
Welder, etc.
2017-03-28
Arsenic fumes
0
500
0.00
Welder, etc.
2017-03-28
Beryllium fumes
0
2
0.00
Welder, etc.
2017-03-28
Cadmium oxide fumes
0
100
0.00
Welder, etc.
2017-03-28
Cobalt fumes
0
100
0.00
Welder, etc.
2017-03-28
Copper fumes
0
100
0.00
Welder, etc.
2017-03-28
Iron oxide fumes
0.41
10
0.04
Welder, etc.
2017-03-28
Lead fumes
0
150
0.00
Welder, etc.
2017-03-28
Magnesium oxide fumes
0
10
0.00
Welder, etc.
2017-03-28
Manganese fumes
0.03
5
0.01
Welder, etc.
2017-03-28
Molybdenum fumes
0
10
0.00
Welder, etc.
2017-03-28
Nickel fumes
0
1
0.00
Welder, etc.
2017-03-28
Vanadium fumes
0
50
0.00
Welder, etc.
2017-03-28
Zinc oxide fumes
0
5
0.00
Welder, etc.
2017-03-28
Arsenic fumes
0
1500
0.00
Welder, etc.
2017-03-28
Beryllium fumes
0
6
0.00
Welder, etc.
2017-03-28
Cadmium oxide fumes
0
100
0.00
Welder, etc.
2017-03-28
Chromium, insoluble
0
3
0.00
Welder, etc.
2017-03-28
Cobalt fumes
0
300
0.00
Welder, etc.
2017-03-28
Copper fumes
8.63
300
0.03
Welder, etc.
2017-03-28
Iron oxide fumes
3.47
20
0.17
Welder, etc.
2017-03-28
Lead fumes
0
450
0.00
Welder, etc.
2017-03-28
Magnesium oxide fumes
0.04
20
0.00
Welder, etc.
2017-03-28
Manganese fumes
0.53
5
0.11
Welder, etc.
2017-03-28
Molybdenum fumes
0
20
0.00
Welder, etc.
2017-03-28
Nickel fumes
0
3
0.00
Welder, etc.
2017-03-28
Vanadium fumes
0
50
0.00
Welder, etc.
2017-03-28
Zinc oxide fumes
0.04
10
0.00
Welder, etc.
2017-03-28
Arsenic fumes
0
1500
0.00
Welder, etc.
2017-03-28
Beryllium fumes
0
6
0.00
Welder, etc.
2017-03-28
Cadmium oxide fumes
0
100
0.00
Welder, etc.
2017-03-28
Chromium, insoluble
0
3
0.00
Welder, etc.
2017-03-28
Cobalt fumes
0.78
300
0.00
Welder, etc.
2017-03-28
Copper fumes
11.76
300
0.04
Welder, etc.
2017-03-28
Iron oxide fumes
2.01
20
0.10
Welder, etc.
2017-03-28
Lead fumes
0
450
0.00
Welder, etc.
2017-03-28
Magnesium oxide fumes
0
20
0.00
Welder, etc.
2017-03-28
Manganese fumes
0.08
5
0.02
Welder, etc.
2017-03-28
Molybdenum fumes
0
20
0.00
Welder, etc.
2017-03-28
Nickel fumes
0
3
0.00
Welder, etc.
2017-03-28
Vanadium fumes
0
50
0.00
Welder, etc.
2017-03-28
Zinc oxide fumes
0.02
10
0.00
Welder, etc.
2017-03-28
Arsenic fumes
0
1500
0.00
Welder, etc.
2017-03-28
Beryllium fumes
0.39
6
0.07
Welder, etc.
2017-03-28
Cadmium oxide fumes
0
100
0.00
Welder, etc.
2017-03-28
Chromium, insoluble
0
3
0.00
Welder, etc.
2017-03-28
Cobalt fumes
0.78
300
0.00
Welder, etc.
2017-03-28
Copper fumes
14.12
300
0.05
Welder, etc.
2017-03-28
Iron oxide fumes
3.3
20
0.17
Welder, etc.
2017-03-28
Lead fumes
0
450
0.00
Welder, etc.
2017-03-28
Magnesium oxide fumes
0
20
0.00
Welder, etc.
2017-03-28
Manganese fumes
0.12
5
0.02
Welder, etc.
2017-03-28
Molybdenum fumes
0
20
0.00
Welder, etc.
2017-03-28
Nickel fumes
0
3
0.00
Welder, etc.
2017-03-28
Vanadium fumes
0
50
0.00
Welder, etc.
2017-03-28
Zinc oxide fumes
0.03
10
0.00
Welder, etc.
2017-03-28
Arsenic fumes
0
1500
0.00
Welder, etc.
2017-03-28
Beryllium fumes
0.39
6
0.07
Welder, etc.
2017-03-28
Cadmium oxide fumes
0
100
0.00
Welder, etc.
2017-03-28
Chromium, insoluble
0
3
0.00
Welder, etc.
2017-03-28
Cobalt fumes
0.78
300
0.00
Welder, etc.
2017-03-21
Quartz, respirable, >1% Qtz
0.15
0.87
0.17
Dry Screen Plant Operator
2017-03-21
Quartz, respirable, >1% Qtz
0.26
0.81
0.32
Laborer, Bullgang
2017-03-21
Quartz, respirable, >1% Qtz
0.16
0.69
0.23
Utility Man
2017-03-21
Quartz, respirable, >1% Qtz
0.36
1.06
0.34
Oiler, Greaser
2017-03-21
Respirable dust, <.1mg
0
Front-end Loader Operator
2015-05-19
Quartz, respirable, >1% Qtz
0.15
0.63
0.24
Front-end Loader Operator
2015-05-19
Respirable dust, <.1mg
0
Utility Man
2015-05-19
Respirable dust, <.1mg
0
Dry Screen Plant Operator
2015-05-19
Respirable dust, <.1mg
0
Front-end Loader Operator
Showing 100 of 127 laboratory readings: every over-limit reading, then the most recent. MSHA reads one air sample several times, so readings outnumber the samples counted above. The full set is in MSHA's Personal Health Samples file.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Haydite Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2018.
Injury rate, 2018
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.95 and the all-US-mining average was 2.33 cases per 100 workers.
In Ohio, metal and nonmetal mining averaged 1.67 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2018 *
0.00
0.00
0.000
2017 *
0.00
0.00
0.000
2016 *
0.00
0.00
0.000
2015 *
0.00
0.00
0.000
2014 *
3.24
0.00
0.000
2013 *
3.80
3.80
0.000
2012 *
0.00
0.00
0.000
2011 *
0.00
0.00
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2018
27
2017
32
2016
33
2015
31
2014
29
2013
26
2012
24
2011
24
2010
20
2009
21
2008
28
2007
26
2006
23
2005
27
2004
32
2003
34
2002
41
2001
36
2000
38
Source: MSHA quarterly employment and production, updated weekly.
Haydite Mine sits in Cuyahoga County, Ohio, where the Census mining category is 0.0% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Cuyahoga County, Ohio · Population 1,249,418
0.0%
Mining share of county employment
$62,823
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Loader operator was pulling clinker material and the right front tire of the John Deere Loader caught on fire. The employee used a Fire Extinguisher - The local Fire Dept was called to put out the Fire - There were no injuries due to the Fire
January 13, 2014OH · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS
Maintenance employee was replacing a skirt rubber on a chute above the main feed belt. The employee did not Lock Out the feed belt and while working on the chute a piece of metal fell onto the moving belt, the employee tried to grab the metal and caught his right arm between the belt and belt cover. The employee sustained a fracture to his right wrist and forearm.
A maintenance employee was reworking rubber belting in the finish screen tower when a spark caused the belting to catch fire - The employee utilized a Fire Extinguisher and was unable to put out the Fire - The local Fire Department was called and put out the fire. There were no injuries due to the Fire.
2006 · 2 incidents
August 17, 2006OH · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorHANDTOOLS (NONPOWERED)
February 22, 2005OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
GETTING DOWN OFF GROVE HE SLIPPED ON STEPS THAT HAD OIL ON THEM. HIS BACK HAD BEEN BOTHERING HIMFOR A FEW DAYS BEFORE SLIPPING DUE TO PREVIOUS CLAIM #93-34381.
June 20, 2000OH · Metal/Non-Metalcoal/ore shovel operator, shoveler, power shovelerHANDLING OF MATERIALS
SHOVELING UNDER BX SCREEN DECK. SCREEN SHUT OFF AND STARTED TO OVERFLOW. TRIED TO RUN OUT OF THE WAY OF FALLING MATERIAL WHEN STURCK A BEAM WITH HIS BACK.
May 26, 2000OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
EMPLOYEE WAS PRYING CHUNK FROM DRAG, WHEN IT FELL ON HIS HAND; STRAINED MIDDLE FINGER HAD SPLINT PUT ON IT.
February 14, 2000OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
CHECKING THE LIME HOPPER/LIME PIPE FOR FLOW WHILE STANDING ON A LADDER. WHEN COMING DOWN FROM THE LADDER EITHER SLIPPED, TRIPPPED OR LANDED WRONG ON RIGHT ANKLE.
May 16, 1998OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
IN PROCESS OF REMOVING AUGER TUBS, A CHAIN WAS WRAPPED AROUND TUB AND HOOKED TO PAYLOADER. EMP WAS IN PAYLOADER, EMP 2 WAS IN DOORWAY WHERE EMP1COULD SEE HIM AND EMP 3 WAS IN BAGHOUSE WHERE NO ONE COULD SEE HIM. EMP1 STARTED PULLING ON TUB WPAYLOADER. TUB WASN'T MOVING. I TOLD EMP2 TO TELL EMP1 TO STOP AND WAIT A MINUTE AND EMP3 WENT TO RAISE TUB. TUB JERKED. FINGER PINCHED.
March 27, 1997OH · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorHANDLING OF MATERIALS
EE WAS WELDING AND EE AND EE NEEDED THE STINGER. EE HANDED IT TO ME TO HAND TO OTHER EE AND AS I REACHED OVER THE EQUIPMENT I BRACED MYSELF AND MY RIGHT HAND. WHEN THAT HAPPEND THE CURRENT WEN T THRU MY BODY AND BURNING MY RIGHT HAND TO THE METAL. LATER I FOUND OUT THERE WAS A BARE WIRE THAT ARCHES.
May 23, 1996OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
LEANED OVER TO PICK UP SOME PULLEYS FRON THE FLOOR AND PUT THEM IN THE LOADER BUCKET. WHEN I LIFTED THE PULLEYS I HAD SEVERE PAIN IN MY LOWER BACK - IT JUST HURT MORE BY THE END OF THE SHIFT.
WALKING UNDER KILN CHECKING OIL AND TEMPERATURESOF TRUNIONS ON NO 1 PIER. MISJUDGED HOW LOW HEAT SHIELDS WERE, HIT HEAT SHIELD WITH TOP OF HARDHAT AND JAMMED HEAD INTO SHOULDERS. FELT A LITTLE SICK AND DIZZY AT TIME. NEXT DAY WAS UNABLE TO MOVE NECK AND BACK.
December 13, 1995OH · Metal/Non-Metalprep plant foreman, supervisor, mill plant supervisor, kiln supervisorHANDLING OF MATERIALS
WE WERE LIFTING OUT OLD GRATE FROM CRUSHER WHEN THE HOOKUP BROKE LOOSE AND IT FELL AND BOUNCED ON MY LEFT LEG.
September 19, 1995OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
CLEANING INSIDE OF CEMENT MIXER, STOOD UP AND TURNED AWAY FROM IT TO GET MORE WATER WHEN THE OPENED GUARD FELL ACROSS THE BACK OF NECK AND SHOULDERS.
September 8, 1995OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
EE WAS ASSISTING A SECOND EE WHILE TAKING TWO PIPES APART. INJURED EE LET LOOSE OF HIS PIPE WRENCH AND LEANED FORWARD TO PICK UP SOMETHING, SECOND EE PULLED ON HIS WRENCH AND INJURED EE'S WREN CH SPUN WITH THE PIPE. THE HANDLE STRUCK INJUREDEE ON THE RT SIDE OF HIS HEAD BEHIND HIS RT EYE CAUSING CONTUSION AND LACERATION.
October 20, 1994OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDTOOLS (NONPOWERED)
EMPLOYEE WAS USING A PIPE WRENCH ON A PIECE OF 2" PIPE TRYING TO REMOVE THE PIPE FROM THE NEXT COUPLING. THE PIPELINE WAS IN A TRENCH ABOUT 18" DEEP. THE PIPE WRENCH SLIPPED & RIGHT INDEX FING ER WAS PINCHED BETWEEN WRENCH HANDLE & GROUND. EMPLOYEE INCURRED A STRAIN OF RIGHT INDEX FINGER.
April 12, 1994OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDTOOLS (NONPOWERED)
WHILE MOVING LARGE PIECES OF STEEL WITH A CUMALONG, CUMALONG LET LOOSE FORCING ME TO FALL BACKWARDS. FELL FACE UP ON CONCRETE LANDING ON MY BACK. DIDN'T GO TO DOCTOR TILL 12/18/93. FIRST DAY O FF OF WORK WAS 12/22/93.
December 2, 1993OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
WHILE MOVING BEAM IT GOT CAUGHT, LIFTED ONE END UP OT MOVE, IT THEN SWUNG OVER AND SMASHED RIGHT HAND INTO PIER (RIGHT INDEX FINER, RIGHT MIDDEL FINGER, RIGHT RING FINGER.
November 30, 1993OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDTOOLS (NONPOWERED)
WAS TAKING CRUSHER APART., TAKING NUT OFF CRUSHER STEAM HITTING NUT WITH 16 POUND HAMMER STANDING ON PAY LOADER BUCKET SWUNG AND LOST BALANCE, FELL ABOUT 6 FEET TO THE GROUND.
September 11, 1993OH · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorHANDTOOLS (NONPOWERED)
COME-ALONG SLIPPED OFF A CABLE AND EE FELL, DATE REPORTED INJURY WAS ON 9/13/93, VISITED DR. ON 9/25/93. VISITED DR AGAIN ON 10/15/93 AT WHICH TIME IT BECAME A MSHA REPORTABLE ACCIDENT.
July 21, 1993OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanOTHER
ENCLOSED IS A COPY OF A PREVIOUS FORM THAT WAS SENT TO YOU ON 5/21/93. THIS GENTLEMAN RETURNED TO WORK FOR A PERIOD OF 20 DAY. HE IS OFF AGAIN FOR ABOUT TWO WEEKS. THIS IS STILL DUE TO THE PRE VIOUS ACCIDENT OF 5/14/93.
June 2, 1993OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
I WAS WATERING DOWN THE YARD WHEN THE HOSE BECAME CRIMPED I WENT TO TAKE THE CRIMP OUT OF THE HOSE & MY FOOT GOT TANGLED IN HOSE LOST MY BALANCE & FELL TWISTING MY LEFT ANKLE
March 30, 1993OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techPOWERED HAULAGE
WAS ON THE LOADER WHEN DUST FLEW UP INTO MY FACE WHEN I WAS DRIVING THE LOADER.
March 10, 1993OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
WALKING THROUGH SHOP SLIPPED AND FELL FORWARD ONTO A SKID.
March 1, 1993OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
RUNNING DOZER IN FRONT OF PLANT NEAR THE OLD KILN MOVING A GIANT SLAB OF CONCRETE - USING DOZER AND CO-WORKER WAS USING 988 FRONT END LOADER. DOZER LURCHED FORWARD DIPPING FRONT END DOWN,JER KED BACK,BODY STAYED FORWARD BEFORE SLAMMING BACK AGAINST SEAT. HAD SEAT BELT ON.
July 22, 1992OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDTOOLS (NONPOWERED)
PUTRTING WOOD UNDER BUNDLE OF METAL PLATES TO TRANSFER FROM LOADER TO HOIST BUNDLE SWUNG OUT AND HIT MY KNEE ALMOST KNOCKING ME DOWN.
August 25, 1991OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
HH SAID HE WAS TIGHTENING A TAIL PULLEY BEARING BOLT AND THE CRESENT WRENCH SLIPPED AND HIS LITTLE FINGER HIT THE GUARD. HE BROKE THE TIP OF HIS FINGER AND REQUIRED STITCHES.
WAS WORKING TO GET #15 FEED GOING WENT TO TURN #16 OFF AND STEPPED IN RUT IN FRNT OF CONTROL SHACK DID NOT SEE TRENCH NO LIGHTS TOE AND FOOT POINTED DOWN LOST BALANCE HEEL WENT DOWN ANKLE HURT S
January 21, 1988OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
I WAS PRYING A 6OLT AND IT BROKE AND MY RIGHT HAND HIT THE KILN BRICK
May 14, 1987OH · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorSLIP OR FALL OF PERSON
WHILE CLIMBING 988 LADDER, RIGHT FOOT SLIPPED OFF OF LADDER WRUNG AND LEFT KNEE CAUGHT TOTAL WEIGHT OF MY BODY. LADDER WRUNGS OF 988 WERE GREASY AT THE TIME ACCIDENT OCCURRED.
1986 · 4 incidents
December 14, 1986OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
EE WAS SHOVELIN1 BACK OF SHALE CRUSHER STRADDLING I-BEAM. HIS LEFT FOOT SLIPPED ON LOOSE GRAVEL & RIGHT FOOT WAS TRAPPED. TWISTED KNEE AS BODY FELL BACK.
October 17, 1985OH · Metal/Non-Metalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorHANDTOOLS (NONPOWERED)
WORKING ON SYMO3'S CRUSHER REPLACING SAUCER BRASS. BRASS WAS TIGHT. OTHER EMPLOYEE AND I,NAME WERE TRYING TO PUT BRASS IN WITH A 4X4. HE WAS HOLDING BRASS AND OTHER EMPLOYEE WAS HAMMERING WITH 4X4. HE MISSED3AND HIT HIS FINGER INSTEAD.
June 21, 1985OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
EMPL CLEANING W9T AUGER AND STEPPED BACKWARDS AND MISSED STEP.WENT BETWEEN STEP AND PLATFORM FALLING BACKWARDS TO BOTTOM STEP AND CUTTING RIGHT ARM BETWEEN WRIST AND ELBOW.
April 9, 1985OH · Metal/Non-Metalbackhoe operator, trackhoe operatorPOWERED HAULAGE