Mining Incidents

Hendersonville: 21 MSHA citations Metal/Non-Metal

Controlled by Vulcan Materials Company
Hendersonville, Henderson County, NC  ·  Active
MSHA Mine ID: 3100091

Hendersonville has $4K in proposed MSHA penalties and $1K outstanding across 6 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Hendersonville.

Fatalities
0
Total incidents
37
Years on record
1985–2023
Latest incident
Jan 2023
Compliance record
MSHA citations since 2000
21
citations
3
significant & substantial
$4,273
proposed penalties
$2,565
paid to date
60% of proposed penalties paid to date, a $1,708 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
68
inspections on record
1,418
inspection hours
1.5
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
21 citations across 1,418 inspection hours.
Source: MSHA inspections data, updated weekly.

Hendersonville has $4K in proposed MSHA penalties and $1K outstanding across 6 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$4K
proposed penalties
$4K
current assessed
$3K
paid to date
$1K
outstanding
21 assessments are final orders; 6 contested dockets.
Of $3K in penalties contested before the Commission, $1K was upheld in final decisions.
As of the most recent assessment on 2025-04-30.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
14.3%
significant & substantial
19.0%
high negligence or reckless
14.3%
reasonably likely or greater
38.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 33.3% low, 47.6% moderate, 19.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
9 citations taken to the federal commission · 43% of citations on record
  • Settled 5 · 56%
  • Stood as issued 2 · 22%
  • Vacated or withdrawn 2 · 22%
0%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 2 decided S&S contests · industry: 79%
67%
Penalty reduction in decided contests
$3K proposed, $1K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2025-03-13.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
SE 2010-939M Vacate Bulluck 2011 $2K → $0
SE 2009-851M Settlement Feldman 2012 $1K → $694
SE 2025-0074 Default Voisin 2025 $151 → $151
SE 2007-368M Dismissal Lesnick 2009 $100 → $100
SE 2013-545M Settlement Barbour 2013 $100 → $100
SE 2013-5M Settlement Zielinski 2013 $100 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-03-13
0%
of limit-tested samples over the exposure limit
30
samples
9
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg18
  • Quartz, respirable, >1% Qtz8
  • Nuisance dust, respirable, <1% Qtz2
  • Fibers, >5um1
Show the individual readings (30)
Date Contaminant Concentration Limit Conc / limit Occupation
2026-03-13 Respirable dust, <.1mg 0 Front-end Loader Operator
2026-03-13 Respirable dust, <.1mg 0 Front-end Loader Operator
2026-03-13 Respirable dust, <.1mg 0 Truck Driver
2023-05-24 Respirable dust, <.1mg 0 Truck Driver
2023-05-24 Quartz, respirable, >1% Qtz 0.38 0.6 0.63 Cleanup Man
2023-05-24 Respirable dust, <.1mg 0 Front-end Loader Operator
2023-05-24 Quartz, respirable, >1% Qtz 0.13 Crusher Oper/Worker
2020-07-08 Respirable dust, <.1mg 0 Drill Operator, Rotary
2014-08-14 Respirable dust, <.1mg 0 Complete Load-Haul-Dump
2014-08-14 Respirable dust, <.1mg 0 Complete Load-Haul-Dump
2014-08-14 Respirable dust, <.1mg 0 Front-end Loader Operator
2014-08-14 Respirable dust, <.1mg 0 Crusher Oper/Worker
2009-03-19 Quartz, respirable, >1% Qtz 0.16 0.32 0.50 Truck Driver
2009-03-19 Respirable dust, <.1mg 0 Truck Driver
2009-03-19 Respirable dust, <.1mg 0 Truck Driver
2009-03-19 Respirable dust, <.1mg 0 Crusher Oper/Worker
2006-05-17 Fibers, >5um 0.08 Cleanup Man
2006-05-17 Respirable dust, <.1mg 0 Drill Operator, Rotary Air
2006-05-17 Respirable dust, <.1mg 0 Crusher Oper/Worker
2006-05-17 Respirable dust, <.1mg 0 Cleanup Man
2005-04-19 Quartz, respirable, >1% Qtz 0.14 0.83 0.17 Cleanup Man
2005-04-19 Quartz, respirable, >1% Qtz 0.31 2.12 0.15 Drill Operator, Jumbo Perc.
2005-04-19 Quartz, respirable, >1% Qtz 0.12 1.16 0.10 Crusher Oper/Worker
2003-04-10 Respirable dust, <.1mg 0 Drill Operator, Rotary
2003-04-10 Quartz, respirable, >1% Qtz 0.18 0.83 0.22 Crusher Oper/Worker
2003-04-10 Unlisted Particulate, respirable, <1% Qtz 0.14 Laborer, Bullgang
2000-11-16 Respirable dust, <.1mg 0 Bulldozer Operator
2000-11-16 Nuisance dust, respirable, <1% Qtz 0.37 10 0.04 Front-end Loader Operator
2000-11-16 Quartz, respirable, >1% Qtz 0.35 2.26 0.15 Shovel Operator
2000-11-16 Nuisance dust, respirable, <1% Qtz 0.3 10 0.03 Dry Screen Plant Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Hendersonville recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In North Carolina, metal and nonmetal mining averaged 1.14 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 0.00 0.00 0.000
2023 * 3.00 3.00 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Vulcan Construction Materials, LLC 1950 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 25
2025 25
2024 26
2023 28
2022 29
2021 22
2020 21
2019 23
2018 24
2017 19
2016 19
2015 17
2014 17
2013 16
2012 14
2011 14
2010 16
2009 20
2008 20
2007 19
2006 22
2005 21
2004 20
2003 21
2002 17
2001 24
2000 24
Source: MSHA quarterly employment and production, updated weekly.

Hendersonville sits in Henderson County, North Carolina, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Henderson County, North Carolina · Population 117,387
0.0%
Mining share of county employment
$67,623
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 14,534 0 0 0.0
2026 Q1 12,607 0 0 0.0
2025 Q4 12,659 0 0 0.0
2025 Q3 14,431 0 0 0.0
2025 Q2 14,639 1 0 68.3
2025 Q1 15,022 1 0 66.6
2024 Q4 15,296 0 0 0.0
2024 Q3 14,547 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 15,556 0 0 0.0
2024 Q1 14,877 0 0 0.0
2023 Q4 15,391 0 0 0.0
2023 Q3 16,583 0 0 0.0
2023 Q2 16,806 0 0 0.0
2023 Q1 17,812 0 0 0.0
2022 Q4 18,554 0 0 0.0
2022 Q3 19,791 0 0 0.0
2022 Q2 17,100 0 0 0.0
2022 Q1 13,915 0 0 0.0
2021 Q4 12,754 0 0 0.0
2021 Q3 13,274 0 0 0.0
2021 Q2 13,615 0 0 0.0
2021 Q1 11,844 0 0 0.0
2020 Q4 10,704 0 0 0.0
2020 Q3 11,910 0 0 0.0
2020 Q2 10,488 0 0 0.0
2020 Q1 11,252 0 0 0.0
2019 Q4 11,530 1 0 86.7
2019 Q3 12,379 0 0 0.0
2019 Q2 13,500 0 0 0.0
2019 Q1 13,799 0 0 0.0
2018 Q4 13,038 1 0 76.7
2018 Q3 15,275 0 0 0.0
2018 Q2 13,497 0 0 0.0
2018 Q1 10,732 0 0 0.0
2017 Q4 10,503 0 0 0.0
2017 Q3 12,200 0 0 0.0
2017 Q2 10,993 0 0 0.0
2017 Q1 8,696 0 0 0.0
2016 Q4 10,112 0 0 0.0
2016 Q3 10,729 0 0 0.0
2016 Q2 11,870 0 0 0.0
2016 Q1 8,083 0 0 0.0
2015 Q4 9,692 0 0 0.0
2015 Q3 11,587 0 0 0.0
2015 Q2 8,434 0 0 0.0
2015 Q1 6,755 0 0 0.0
2014 Q4 8,975 0 0 0.0
2014 Q3 11,085 1 0 90.2
2014 Q2 8,955 0 0 0.0
2014 Q1 6,976 1 0 143.3
2013 Q4 7,452 0 0 0.0
2013 Q3 8,372 0 0 0.0
2013 Q2 9,380 1 0 106.6
2013 Q1 5,208 0 0 0.0
2012 Q4 4,787 0 0 0.0
2012 Q3 9,377 1 0 106.6
2012 Q2 7,515 0 0 0.0
2012 Q1 3,876 0 0 0.0
2011 Q4 4,892 0 0 0.0
2011 Q3 8,163 0 0 0.0
2011 Q2 8,020 0 0 0.0
2011 Q1 5,143 0 0 0.0
2010 Q4 7,158 0 0 0.0
2010 Q3 9,963 0 0 0.0
2010 Q2 9,635 0 0 0.0
2010 Q1 2,921 0 0 0.0
2009 Q4 8,710 2 0 229.6
2009 Q3 8,881 3 0 337.8
2009 Q2 7,910 0 0 0.0
2009 Q1 3,509 0 0 0.0
2008 Q4 7,567 0 0 0.0
2008 Q3 10,645 0 0 0.0
2008 Q2 11,311 1 0 88.4
2008 Q1 7,913 0 0 0.0
2007 Q4 10,633 0 0 0.0
2007 Q3 12,390 0 0 0.0
2007 Q2 12,741 1 0 78.5
2007 Q1 11,969 0 0 0.0
2006 Q4 16,742 0 0 0.0
2006 Q3 12,813 0 0 0.0
2006 Q2 13,538 0 0 0.0
2006 Q1 11,689 0 0 0.0
2005 Q4 10,787 0 0 0.0
2005 Q3 12,817 0 0 0.0
2005 Q2 12,576 0 0 0.0
2005 Q1 13,133 0 0 0.0
2004 Q4 13,468 0 0 0.0
2004 Q3 12,803 0 0 0.0
2004 Q2 12,965 0 0 0.0
2004 Q1 8,945 0 0 0.0
2003 Q4 11,316 1 0 88.4
2003 Q3 6,211 0 0 0.0
2003 Q2 11,455 0 0 0.0
2003 Q1 10,463 0 0 0.0
2002 Q4 715 0 0 0.0
2002 Q3 12,490 0 0 0.0
2002 Q2 12,434 0 0 0.0
2002 Q1 11,583 0 0 0.0
2001 Q4 10,532 0 0 0.0
2001 Q3 16,797 0 0 0.0
2001 Q2 13,325 0 0 0.0
2001 Q1 12,340 0 0 0.0
2000 Q4 12,965 0 0 0.0
2000 Q3 13,919 0 0 0.0
2000 Q2 12,616 0 0 0.0
2000 Q1 12,824 1 1 78.0
No fatalities recorded at this mine.

Reportable incidents

37 on file

2023 · 1 incident

January 9, 2023 NC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Vulcan Construction Materials, LLC · Over-exertion in lifting objects

"Was in screen on back trying to move a screen, twisted awkwardly and lost control of screen. Felt a pop on knee, had discomfort but no swelling or bruising."

2017 · 1 incident

July 20, 2017 NC · Metal/Non-Metal quality control technician, laboratory technician, laboratory assistant OTHER
Vulcan Construction Materials, LLC · Over-exertion (Not Elsewhere Classified)

Employee bear hugged injured employee around the chest/arms and suffered a chest strain.

2013 · 1 incident

October 23, 2013 NC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Vulcan Construction Materials, LLC · Struck by... (Not Elsewhere Classified)

Employee was helping install a water pipe when it moved unexpectedly and struck the employee in the leg.

2010 · 1 incident

June 15, 2010 NC · Metal/Non-Metal drill operator SLIP OR FALL OF PERSON
Vulcan Construction Materials, LLC · Over-exertion (Not Elsewhere Classified)

EE was mounting the drill allegedly slipped and injured his back. The claim was not determined until 7-29-2010 that it was a work related injury.

2006 · 2 incidents

February 2, 2006 NC · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Vulcan Construction Materials, LLC · Over-exertion in lifting objects

EE injury his left knee while lifting a bucket of rock drill oil out of the drill truck. EE recently went to the doctor and filed a claim.

January 13, 2006 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Vulcan Construction Materials, LLC · Flash burns (welding)

EE and a coworker were air arching on the main frame liner inside of the cone crusher. They had their backs to each other when the UV rays we think reflected off the inside of EE's welding hood and burned his eyes.

2005 · 1 incident

February 21, 2005 NC · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator FIRE
Vulcan Construction Materials, LLC · Fall from machine

Right heel fractured after jumping off the second step of the WA600 loader that was on fire.

2004 · 2 incidents

May 24, 2004 NC · Metal/Non-Metal clerk, timekeeper, office worker, director of sales HANDLING OF MATERIALS
Vulcan Construction Materials, LLC · Over-exertion (Not Elsewhere Classified)

Employee was moving boxes w/paper & supplies several weeks ago. Injury was to lower back and was not known to be a work place injury until 6/4/04.First incident was in March, no medical treatment required. Recurrance on 5/24/04 medical attention was sought. Supervision was not notified of the recurrence and determination made that it was work related until 6/4/04.

February 13, 2004 NC · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer POWERED HAULAGE
Vulcan Construction Materials, LLC · Struck by falling object

EE WAS GOING TO UNLOAD A 1 1/2" AIR IMPACT WRENCH FROM THE BED OF THE TRUCK. HE JERKED THE LATCH ON THE TAILGATE TO OPEN IT. THE TAILGATE DISLODGED FROM ITS MOUNTING POINTS, FALLING AND STRI KING THE EE'S LEG.

2003 · 1 incident

January 30, 2003 NC · Metal/Non-Metal assayer, geologist, metallurgist, engineer, engineer management SLIP OR FALL OF PERSON
Vulcan Construction Materials, LLC · Fall to the walkway or working surface

EMPLOYEE WAS INSPECTING THE ROLLERS ALONG RETURN BELT AND SLIPPED AND FELL DUE TO WET/ICE WALKWAY. INJURY TO RIGHT KNEE, LACERATION & STITCHES.

2002 · 1 incident

2000 · 1 incident

1996 · 1 incident

March 25, 1996 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Vulcan Construction Materials, LLC · Caught in, under or between a moving and a stationary object

BAR WAS BEING USED TO HOLD TIMING GEAR IN PLACE WHILE OTHER GEAR WAS BEING PLACED ON SHAFT. BAR SLIPPED OFF BOLTS BEING USED AS A PIVOT POINT. THIS CAUSED GEARS TO TURN. EMPLOYEES HAND WAS CAU GHT BETWEEN GEARS. INJURY WAS LACERATION TO RIGHT INDEX FINGER, HAIRLINE FRACTURE TO SAME FINGER.

1995 · 3 incidents

October 4, 1995 NC · Metal/Non-Metal crane operator, mobile equipment operator (meo), dragline operator, dropball operator, rigger SLIP OR FALL OF PERSON
Vulcan Construction Materials, LLC · Fall onto or against objects

GETTING DOWN FROM OPERATORS SEAT TO REHOOK DROP BALL. EE SWUNG DOWN TO TRACK AND FEET SLIPPED ON TRACK FROM RAIN. HEFELL ON TRACK BREAKING HIS RIGHT ELBOW.

September 14, 1995 NC · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler POWERED HAULAGE
Vulcan Construction Materials, LLC · Struck by falling object

WAS IN AREA WHERE ROCK HAD BEEN FALLING. DID NOT RECOGNIZE DANGER AREA. WE HAD TALKED OF THIS AREA IN PAST. DAMAGE OR INJURY WAS NOT SERIOUS BUT COULD HAVE BEEN.

June 5, 1995 NC · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer EXPLODING VESSELS UNDER PRESSURE
Vulcan Construction Materials, LLC · Struck by flying object

WALLKING PAST FUEL TRUCK WHEN RIGHT REAR INSIDE TIRE BLEW OUT, SHOWERING EMPLOYEE WITH ROCK, TRIE FRAGMENTS AND TIRE LIFE FLUID.

1994 · 2 incidents

March 15, 1994 NC · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer OTHER
Vulcan Construction Materials, LLC · Struck by flying object

EE WAS SHARPENING A BIT WHEN A PIECE OF METAL BY PASSED HIS SAFETY GLASSES WITH SIDE SHIELDS & HIS FACE SAIELD THE WIND WAS GUSTING UP TO 35 MPH

March 14, 1994 NC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Vulcan Construction Materials, LLC · Caught in, under or between (Not Elsewhere Classified)

WHILE ATTEMPTING TO CONNECT LIFTING SLING TO THERUNWAY BEAM, THE CRANE OPERATOR RAISED THE HOISTHOOK, CAUSING THE RUNWAY BEAM TO ROLL OVER PINNING INJURED'S LEGS BETWEEN TWO RUNWAY BEAMS, BREAKING LEFT LEG JUST ABOVE THE ANKLE.

1993 · 1 incident

June 7, 1993 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Vulcan Construction Materials, LLC · Struck by flying object

BLOWING HOUSING ON FEEDER OUT WITH AIR HOSE TO REPLACE BEARINGS. FOREIGN OBJECT GOT IN LEFT EYE.

1992 · 3 incidents

September 29, 1992 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Vulcan Construction Materials, LLC · Caught in, under or between a moving and a stationary object

HE WAS TWISTING A FITTING OUT OF A BARREL OF ANTI-FREEZE. WHEN LIFTING BENT MASHING HIS LEFT THUMB BETWEEN THE RIM OF THE DRUM AND HANDLE OF PIPE WRENCH.

September 3, 1992 NC · Metal/Non-Metal superintendent HANDTOOLS (NONPOWERED)
Vulcan Construction Materials, LLC · Caught in, under or between a moving and a stationary object

EMPLOYEE WAS HOLDING A 48" PIPE WRENCH TRING TO REMOVE HAMMER FROM D40K DRILLTECH. WHEN THE OPERATOR APPLIED HYD PRESSURE TO DRILL TO TURN STEEL IT MASHED HIS THUMB BETWEEN THE WRENCH AND MAST OF THE DRILL. THIS MASHED THE THUMB OFF" ABOVE THE FIRST JOINT.

January 22, 1992 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech OTHER
Vulcan Construction Materials, LLC · Struck by flying object

EE WAS CLEANING AND HAMMERING ON CHUTE TO BE REPAIRED ON THE WASH SCREEN WHEN THE WIND GUSTED BLOWING FOREIGN OBJECT INTO LEFT EYE.

1991 · 1 incident

August 10, 1991 NC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
Vulcan Construction Materials, LLC · Struck by... (Not Elsewhere Classified)

HE WAS TIGHTENING FEEDER PAN BOLTS ON A RESTRICTED WORK SPACE AREA. HE WAS USING AN AIR WRENCH. FOREIGN MATERIAL FELL OR WAS BLOWN INTO EMPLOYEE'S LEFT EYE.

1990 · 1 incident

March 16, 1990 NC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Vulcan Construction Materials, LLC · Struck by... (Not Elsewhere Classified)

MOVING SCREEN CLOTH IT SLIPPED MASHING FINGER ON L HAND

1989 · 5 incidents

September 16, 1989 NC · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Vulcan Construction Materials, LLC · Fall from machine

STEAM CLEANING, ON LOADER STEAM HOSE ENTANGLED GAVE IT TUG , LOST BALANCE, JUMPED FROM MACHINE, LANDED ON L HEEL , FOUND WAS BROKEN

August 8, 1989 NC · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
Vulcan Construction Materials, LLC · Struck against a moving object

EMPLOYEE WAS WATERING THE ROADS TO SECOND LEVEL TO PIT, AND LOST CONTROL OF WATER TRUCK.

August 4, 1989 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Vulcan Construction Materials, LLC · Over-exertion (Not Elsewhere Classified)

TAKING AIR COMPRESSOR OFF MACK TRUCK COMPRES. REMOVED STARTED TO GET OFF FENDER SLIPPED TWISTED L KNEE

May 8, 1989 NC · Metal/Non-Metal SLIP OR FALL OF PERSON
Vulcan Construction Materials, LLC · Fall to the walkway or working surface

INJURED WAS DIRECTING LOADER OPERATOR WHEN HE STEPPED BACK HE TRIPPED OVER PALLET AND FELL BACKWARDS, LANDING ON HIS RIGHT ARM, THIS CAASUED STRAIN TO RIGHT ELBOW.

1988 · 4 incidents

August 29, 1988 NC · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer OTHER
Vulcan Construction Materials, LLC · Struck by flying object

EMPLOYEE WAS CHANGING SCREENS WHEN A STRONG GUST OF WIND BLEW DUST INTO HIS EYES, GOING BEHIND THE SIDE SHIELDS OF HIS SAFETY GLASSES. THE DUST THEN GOT UNDER HIS CONTACT LENS AND SCRATCHED HI S EYE.

July 11, 1988 NC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
Vulcan Construction Materials, LLC · Struck by... (Not Elsewhere Classified)

TIGHTENING CRUSHER WHEN ROCK CAME FROM INSIDE CRUSHER STRIKING EMPL ON RIGHT ARM.

May 3, 1988 NC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Vulcan Construction Materials, LLC · Caught in, under or between (Not Elsewhere Classified)

THE EMPLOYEE WERE CHANGING V-BELTS ON THE WASH SCREEN BY ROCKING THE SCREEN TO ROLL THE BELTS ONTO THE SHIEVE. HE WAS HOLDING THE BOLTS AND TWISTING THEM WHEN HIS FINGERS ON THE LEFT HAND WER E CAUGHT BETWEEN THE SHIEVE AND BELTS.

March 2, 1988 NC · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Vulcan Construction Materials, LLC · Struck against a moving object

EMPL OPERATING 35X TRUCK ON PLANT TO STOCKPILE HAUL ROAD .WRENCHED BACK AFTER TRAVELING ROUGHT SSECTION OF ROADWAY.

1986 · 3 incidents

October 28, 1986 NC · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Vulcan Construction Materials, LLC · Struck by... (Not Elsewhere Classified)

EE WAS STRIKING3A BEARING RACE WITH A BALL PEEN HAMMER WHEN A PIECE OF THE RACE WAS THRUST INTO HIS RIGHT EYE.

July 25, 1986 NC · Metal/Non-Metal quality control technician, laboratory technician, laboratory assistant HANDTOOLS (NONPOWERED)
Vulcan Construction Materials, LLC · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS US3NG A 5/8 ROD TO FEED BLASTING AB AGENT TO AUGER THIS ROD HAD A 90 DEGREE BEND IN THE TOP OF IT WHEN THIS PART OF ROD WAS BELOW HEAD LEVEL HE STRUCK HIMSELF IN THE BACK OF HIS HEAD WITH THE 3BEND

May 14, 1986 NC · Metal/Non-Metal mechanic helper HANDLING OF MATERIALS
Vulcan Construction Materials, LLC · Caught in, under or between (Not Elsewhere Classified)

WHEN INSTALLING3V-BELT ON ACCESSORY DRIVE PULLEY ON ENGINE THE INJURED PERSONS HAND WAS CAUGHT BETWEEN THE BELT & THE PULLEY WHEN THE ENGINE WAS BUMPED IN AN ATTEMPT TO WALK THE BELT ON THE PU LLEY INDEX FIN1ER OF RT HAND WAS PARTIALLY SEVERED REQUIRING IMMEDIATE MEDICAL ATTENTION

1985 · 1 incident

August 29, 1985 NC · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
Vulcan Construction Materials, LLC · Struck against a moving object

RIGHT FRONT WHEEL CAME OFF TRUCK ON THE STOCKPILE ROAD WHILE TRUCK WAS LOADED. THE SUDDEN STOP SLID THEDRIVERS KNEE INTO THE DASH BOARD.