HILLTOP AGGREGATE, INC. has $842 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at HILLTOP AGGREGATE, INC..
Fatalities
0
Total incidents
26
Years on record
1988–2005
Latest incident
Oct 2005
Compliance record
MSHA citations since 2002
11
citations
1
significant & substantial
$842
proposed penalties
$842
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
16
inspections on record
185
inspection hours
n/a
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 185 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
HILLTOP AGGREGATE, INC. has $842 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$842
proposed penalties
$842
current assessed
$842
paid to date
$0
outstanding
11 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2005-12-14.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2006 Q2
0
0
0
2006 Q1
1,322
0
0
0.0
2005 Q4
3,334
1
1
299.9
2005 Q3
4,259
0
0
0.0
2005 Q2
5,116
0
0
0.0
2005 Q1
3,976
1
0
251.5
2004 Q4
4,792
0
0
0.0
2004 Q3
4,901
7
0
1428.3
Show 17 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2004 Q2
4,798
0
0
0.0
2004 Q1
4,691
0
0
0.0
2003 Q4
5,270
1
0
189.8
2003 Q3
5,498
0
0
0.0
2003 Q2
6,256
0
0
0.0
2003 Q1
5,143
0
0
0.0
2002 Q4
6,382
1
0
156.7
2002 Q3
6,083
0
0
0.0
2002 Q1
4,712
0
0
0.0
2001 Q4
5,647
0
0
0.0
2001 Q3
5,830
0
0
0.0
2001 Q2
5,363
0
0
0.0
2001 Q1
3,892
0
0
0.0
2000 Q4
6,994
0
0
0.0
2000 Q3
7,959
0
0
0.0
2000 Q2
7,904
0
0
0.0
2000 Q1
6,994
0
0
0.0
No fatalities recorded at this mine.
Reportable incidents
26 on file
2005 · 2 incidents
October 10, 2005OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
Was cleaning loader for service. Returned to garage to turn off burner on machine to cool off water. Was cleaning concrete with wand when hose stuck on door frame pulling wand into left foot. Water was still hot inflicting burn to left, outside, foot.
2003 · 1 incident
May 20, 2003OH · Metal/Non-Metalwelder (shop)MACHINERY
EE WAS HOLDING A SQUARE ON REBAR STRUCTURE TO BE WELDED. WITNESS STRUCK AN ARC WHEN THE MIG WIRE DEFLECTED OFF STRUCTURE INTO THIGH. HOT WIRE CAUSED BURN. EE APPLIED FIRST AID & RETURNED TO WO RK. SEVERAL DAYS LATER, THIGH BECAME RED & IRRITATED, SOUGHT MEDICAL ATTENTION. DR. PRESCRIBED ANTIBIOTICS.
2002 · 1 incident
August 16, 2002OH · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerSLIP OR FALL OF PERSON
TRACKHOE HAD BLOWN AN ORING WHICH RESULTED IN THE NEED FOR ADDITIONAL HYD OIL. EE WAS REMOVING FILLER CAP ON TOP OF MACHINE WHEN HE TURNED AROUND TO DESCEND, LOST HIS BALANCE, MISSED THE HAND HOLD & LANDED ON CRAWLER TRACK BELOW. APPROX 3 FT DROP TO TRACK FROM ABOVE.
1998 · 1 incident
December 12, 1998OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanMACHINERY
EMPLOYEE WAS CUTTING WOOD WITH A STIHL CHAINSAW,WHEN A BRANCH SNAPPED BACK CAUSING CHAIN SAW TO MAKE CONTACT WITH LEFT SIDE OF FOOT. IT CUT THROUGH SHOE AND FOOT CREATING A ONE INCH GASH.
1997 · 3 incidents
August 27, 1997OH · Metal/Non-Metalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorSLIP OR FALL OF PERSON
WHILE CHIPPING METAL SLAG FROM A WELD BEAD ON A CAT D8 DOZER BLADE, A PIECE OF HOT SLAG DEFLECTED FROM CHIPPING HAMMER, OVER WELDING HELMET INTO LEFT EYE. WELDING HELMET AND SAFETY GLASSES WER E BEING WORN.
1996 · 6 incidents
October 29, 1996OH · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDTOOLS (NONPOWERED)
WAS REMOVING CYLINDER FROM LOADER USING PRY BAR TO REMOVE FROM FRAME. BAR SLIPPED OUT UNDER PRESSURE STRIKING SIDE OF FOREHEAD BY EYE CUTTING SIDE OF EYE. NEEDED 3-4 STITCHES TO CLOSE CUT.
May 20, 1996OH · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanPOWERED HAULAGE
WHILE DRILLING 3" HOLE THROUGH ELECTRICAL BOX WALL AND SIDING OF BUILDING EMP HIT A NAIL WITH DRILL BIT. DRILL MOTOR SPUN IN EMP'S HAND CAUSING INDEX AND CENTER FINGERS TO COME IN CONTACT WITH SHARP EDGE OF ELECTRICAL BOX. 1ST TWO FINGERS WERE CUT 2 1/2" LONG AND DOWN TO THE BONE. 3RD FINGER WAS SCRATCHED ON TOP.
1995 · 1 incident
March 8, 1995OH · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDTOOLS (NONPOWERED)
EE WAS CUTTING A NEW CONVEYOR BELT OFF A ROLL WITH A UTILITY KNIFE AND SLIPPED. THE RIGHT LEG WAS CUT ON THE THIGH TOWARDS THE TOP OF THE LEG. THE KNIFE CUT THE FAT PART OF THE LEG AND SOME MU SCLE. THREE STITCHES INTERNAL AND 5 STITCHES EXTERNAL.
1994 · 1 incident
September 28, 1994OH · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS
EE WAS DOING GENERAL PLANT MAINTANANCE WHEN THE SCREEN FEED BOX BECAME PLUGGED AND OVERFLOWED A ROCK DROPPED ON HEAD PULLEY BOUNCED OFF HITTING EE ON TOP OF HIS HARD HAT KNOCKED HIM DOWN ON CA TWALK. HE STRUCK THE BACK OF HIS HEAD ON CATWALK CAUSING SWELLING.
INJURED WAS SITTING IN HIS HAUL TRUCK WAITING TO BE LOADED, WHEN THE LOADER OPERATOR WAS LOADING HIM AND DROPPED THE BOOM, WITH A FULL BUCKET OF MATERIAL ON THE BACK OF HIS TRUCK. HIS TRUCK W AS JARRED AND HE EXPERIANCED A PAIN THAT SHOT UP HIS BACK AND INTO HIS SHOULDER, THIS PAIN ALSO SHOT DOWN INTO HIS RIGHT LEG.
EE WAS CLEANING CLAY OFF OF THE TOP DECK OF THE 4 X 12 SIMPLICITY SCALPING SCREEN, WHEN A ROCK ROLLED DOWN THE CHUTE HITTING HIS LEFT HADN. THIS CAUSED A BRUISE ON THE THREE OUTER FINGERS. HE DID NOT BREAK ANY PART OF HIS HAND. HE WAS TAKENTO THE MED CENTER TO CHECK FOR FRACTURES.
1992 · 1 incident
November 3, 1992OH · Metal/Non-Metalhaul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driverSLIP OR FALL OF PERSON
HE WAS CLIMBING OUT OF THE HAUL TRUCK WHEN HE SLIPPED ON THE LAST STEP AND LANDED ON THE HEEL OF HIS FOOT.
1991 · 1 incident
May 6, 1991OH · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSTEPPING OR KNEELING ON OBJECT
WAS REPAIRING SCREEN ON ENTRANCE TO CLASSIFIER WHEN HE STEPPED BACK AND FOOT CAME DOWN ON ROD GUIDE PUNCTURING BOTTOM,MIDDLE OF FOOT 3/8" LONG AND 2 INCHES DEEP.
1990 · 1 incident
June 20, 1990OH · Metal/Non-Metalbarge/boat/dredge/towbarge/towboat/leach operator, riverman, deck handPOWERED HAULAGE
WAS CUTTING A PIECE OFF OF A CONVEYOR BELT WHEN KNIFE SLIPPED AND STAPPED RIGHT ARM.
For insurers, brokers, and safety consultants
The full compliance file on HILLTOP AGGREGATE, INC.
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.