HUNTINGTON PLANT CS01: 1 recorded fatality Metal/Non-Metal

Cable tray slipped from hand and employee tried to catch it pulling on arm.

Employee alleges employee was using a hammer to fix a hub and the hammer slipped out of employee's hand cutting left thumb. Employee received 10 stitches.

Employee alleges they were in the process of breaking steel apart with a drill and they started feeling pain in the right shoulder. Employee started loosing time on 10/12/2018, but has returned to work on 10/16/2018.

Employee alleges EE was lighting a Furnace and it went out and came through the door burning EE's left forearm.

Employee alleges EE was using a torch to heat up a bolt and a foreign object blew into right eye.

Employee alleges was tightening a bolt with a ratchet and the ratchet slipped smashing right ring finger. Employee received stitches.

Employee alleges he was putting liners in a load hopper and it became too heavy and it tipped over on him. Causing a fracture to his left ankle.

Employee alleges he was getting out of the loader and he hit his right elbow on the pipe of the ladder he was climbing down from.

Employee alleges he was cleaning out a grizzly and he reached down to remove a small rock and then a big rock fell over and smashed his finger between the grizzly and the rock causing a laceration to his right index finger. He received 6 stitches.

Employee placed a 4x4 underneath a portable pump to be able to pick the pump up with a forklift. He signaled the operator to raise the forks. The 4x4 snapped pinching the end of his little finger causing a small fracture.

Employee alleges he was loading trucks and his hands started going numb. Employee was just diagnosed with carpal tunnel and he had surgery on 04-17-2012 and is now losing time from work.

Employee alleges he was loading stock pile signs on the truck and his upper back starting hurting.

Employee alleges he was removing bearings and he hit his left knee with the hammer handle causing a laceration to his left knee.

Employee alleges he was lifting a wheel hub and he cut his arm on a sharp metal object receiving stitches.

Employee alleges he was using a torch to cut steel and it went down into his glove causing 2nd degree burn to his left hand and wrist.

Employee alleges his ankle got caught between two steel beams and he fell.

Employee alleges he was changing screens and he stepped on chute and lost his footing and slipped on chute door cutting his leg. He received stitches.

Employee alleges he was drilling holes in steel plate and he heard something pop down by his belt.

Employee alleges he has been doing a repetitive motion operating a loader and he is starting to feel pain in both wrist and his fingers. Employee had surgery on 06-14-07 and started loosing time. Late report due to insurance company was investigating and was just notified by the insurance company.

Employee alleges he was drilling holes in beam and his glove got caught in drill, causing him to receive a broken left thumb.

Employee alleges he was pulling fuel hose down hill and a rock rolled down and landed on his right foot fracturing his little toe.

EMPLOYEE ACCIDENT WAS DUE TO CARPAL TUNNEL RESULTING FROM INJURIES HE HAD ON HIS FINGER.

Employee alleges he was lining a piece of steel in the saw as he closed the clamping vice the end of his fingers got caught in the vice, smashing his fingers.

EE ALLEGES HE WAS HOLDING A PUNCH FOR A CO-WORKER AND THE CO-WORKER SWUNG THE HAMMER AND MISSED THE PUNCH AND HIT HIS LITTLE PINKY FINGER ON HIS RIGHT HAND.

CONTRACTED BILATERAL CARPAL TUNNEL SYNDROME FROM 15 YEARS OF TYPING AND USING THE COMPUTER MOUSE AND THE LIKE. SURGERY WAS REQUIRED AND WAS COMPLETED ON 9-19-03.

EE ALLEGES HE WAS PULLING BROKEN DRILL STEEL OUT OF MACHINE AND HE DROPPED IT ON HIS RIGHT FOOT.

EE ALLEGES WHILE REMOVING EXISTING SPACERS ON SIDE OF IMPACT CRUSHER, THE SET OF SPACERS SLIPPED OUT OF HIS HANDS SMASHING HIS THUMB.

EE ALLEGES AFTER GRINDING OPERATION, HE TOOK HIS SLEEVE ON HIS JACKET AND WIPED HIS EYEBROW AND HE FELT SOMETHING IN HIS EYE.

EMPLOYEE ALLEGES HE WAS PUTTING CUTTING EDGE BACK ON DOZER AND AS HE WAS HITTING DOZER WITH A HAMMER A PIECE BROKE OFF AND WENT INTO HIS RIGHT LEG.

EE ALLEGES HE WAS HELPING DRILLER INSTALL 3 RODS AND COUPLINGS ON ROCK DRILL. THE OTHER EE MOVED FEED CONTROL LEVER AND CAUGHT INJURED'S HAND BETWEEN THE COUPLING AND THE ROD ARMS.

EMPLOYEE ALLEGES HE WAS LIFTING BLOCKS TO PUT UNDER PONTOONS, THE CHAIN CAME LOOSE AND HIT HIM ON HIS LEFT HAND.

EE ALLEGES HE WAS CLEANING OFF SAAND FROM SANDBLASTING WHEN HE PUT WEIGHT ON BLOCKS THEY FELL OVER AND HE FELL TO THE GROUND.

EE ALLEGES WHILE HE WAS CHANGING THE WIDTH OF FORKS ON LIFT TRUCK, HE FELT A PULL IN HIS LOWER BACK.

EMPLOYEE ALLEGES HE WAS TURNING OVER A SUPPORT STRUCTURE WHEN A SMALL PIECE OF TUBING BROKE OFF AND STRUCK HIM IN HIS RIGHT SHOULDER BLADE AND BACK.

EE ALLEGES HE WAS CUTTING 1/2" PLATE WITH TORCH, AS HE FINISHED HE FLIPPED UP HIS SHIELD AND A PIECE OF METAL SCALE POPPED INTO HIS LEFT EYE.

EE ALLEGES HE WAS TIGHTENING BOLTS ON ESCAVATOR AND THE WRENCH SLIPPED OUT OF HIS HAND.

EE ALLEGES HE WAS REMOVING PIN FROM CYLINDER ON EXCAVATOR, WHILE ON LADDER PIN CAME OUT AND HIT HIM ON HEAD CAUSING HIM TO FALL FROM LADDER.

EMPLOYEE ALLEGES HE WAS PUSHING BEARING HOUSING UP INTO PLACE AND HE FELT SOMETHING HURITNG IN HIS BACK.

EE ALLEGES HE WAS DRIVING A 550 DRESSER FRONT END LOADER FROM STOCKPILE TO LOAD CUSTOMER TRUCKS, AT THE END OF THE DAY HE STARTED FEELING PAIN IN HIS LOWER BACK.

EE ALLEGES HE WAS WELDING AND WIND BLEW WELD SPATTER INSIDE OF HELMET AND INTOHIS LEFT EYE.

EE WAS CLEANING OUT A FURANCE WHEN FLAME CAME OUT KNOCKING HIM OFF LADDER, CAUSING A SPRAIN TO RIGHT WRIST AND BURN TO HIS FACE.

HE WAS LOADING TRUCK, SLIPPED AND FELL OFF LOADER.

HE WAS WELDING, A PIECE OF SLAG STEEL POPPED OFF OF WELDER AND HIT HIM IN RIGHT EYE.

EE WAS WASHING OUT SAND SCREEN AT END OF DAY WITH FIRE HOSE, HE TRIPPED & LANDED ON HIS BACK.

EMPLOYEE REACHED FORWARD WITH LEFT HAND FOR BALANCE, AND MADE CONTACT WITH FLAME OF TORCH.

EMPLOYEE CLIMBED LADDER TO WORK ON ENGINE IN TRUCK AND WHILE STEPPING ONTO TRUCK FENDER, LADDER FELL OVER AND EMPLOYEE LANDED ON CONCRETE SHOP FLOOR.

EMPLOYEE GRABBED HOLD OF THE GRILL ON THE TRUCK AND PULLED IT OVER HIMSELF, CAUSING HIM TO CUT HIMSELF IN UPPER LIP AND GUM AREA.

EE WAS RUNNING UP THE WALKWAY WITH HIS HEAD DOWN AND HE RAN FACE FIRST INTO A SHEET OF PLYWOOD THAT WAS UNDER THE BELT AND EXTENDED OVER THE WALKWAY.

EE CUT HIS THUMB REQUIRING STITCHES WHILE CUTTING CEILING TILES.

WHILE CLIMBING OUT OF TRUCK BED, EMPLOYEE FELT BACK POP. IT DID NOT START TO HURT UNTIL NEXT DAY.

EMPLOYEE AND GARDNER DENVER SERVICE TECHNICIAN WERE INSTALLING NEW MAST ON GARDNER DENVER 4500 DRILL. THE MAST WAS CHAINED TO OVERHEAD CRANE OPERATED BY ASST SUPT. THEY WERE ON TOP OF DRILL GU IDING MAST INTO PLACE. AS MAST WAS BEING LOWERED, THE CHAIN RING FAILED ALLOWING MAST TO DROP PINNING EMPLOYEE BETWEEN MAST AND CAB OF MACHINE.

EMPLOYEE WAS PRYING ON GEARS WHEN THE BAR SLIPPED, FALLING ON HIS RIGHT FOOT JUST BEHIND HIS STEEL TOES.

EMPLOYEE WAS PUTTING 61/2IN SHAFT IN BEARING & SHAFT SLID OUT OF BEARING HITTING HIM IN THE KNEE

EMPLOYEE HAD PUT OIL IN MACHINE; AS HE WAS CLIMBING DOWN FROM WATER WAGON, HIS FOOT SLIPPED ON STEP, CAUSING HIM TO FALL, TWISTING HIS KNEE.

EMPLOYEE WAS GETTING OFF OF RAIL CAR AND MISSED LAST STEP AND BUMPED HIS WRIST AS HE REACHED FOR HAND LADDER.NO WORK WAS MISSED.NOTE LATE REPORTING DUE TO AUDIT.

EMPLOYEE STRAINED HIS LOWER BACK WHILE WORKING ON PLANT CONVEYOR BELT NOTELATE REPORTING DUE TO AUDIT.

EMP. LIFTED A PC. OF STEEL, TURNED WITH IT AND GOT A KINK IN HIS BACK.

EMPLOYEE WAS REMOVING HYDRAULIC PUMP FROM LOADER WHEN CHISEL CAME OUT AND HIT HIM IN THE MOUTH,LOOSENING 3 UPPER FRONT TEETH.NOTE:LATE REPORTING DUE TO AUDIT.

AT APPROXIMATEL2 11:00A.M. ON AUGUST 12,1987,A BOSS CONSTRUCTION COMPANY TRUCK DRIVER(A NON-EMPLOYEE OF CENTRAL STONE)WAS OBSERVED BACKING HIS "TRUCK AND PUP" HAUL UNIT INTO THE AREA OF THE WA TER HYDRANT TO 4ASH MATERIAL FROM HIS TRUCK.APPROXIMATELY 11:10 AN EMPLOYEE OF CENTAL STONE CO.(NAME) NOTICED THE WATER HOSE SPRAYING ERRACTICALLY AND WENT TO INVESTIGATE THE PROBLEM.HE FOUND

EMPLOYEE WAS MO5ING WOODEN BLOCK IN BACK OF PICKUP TRUCK- BLOCK SLIPPED FROM HAND PINNED HAND BETWEEN TRUCK BED AND HOSE CLAMP CUTTING MIDDLE FINGER OF LEFT HAND REQUIRING FOUR STITCHES. FING ER WAS CUT TO B2NE.

EMP WAS STANDIN1 ON PLATFORM ATTACHED TO WATER AWAGON, HE WAS THROWN FORM PLATFORM WHEN WHEEL HIT A RUT THROWING PLATFORM AGAINST RAILROAD CAR AND PULLING GUARD RAIL OFF. HE WAS THROWN ONTO TH E RAILCAR 3

EMPLOYEE WAS WA5KING BETWEEN SHOPS AFTER CREW MEETING STEPPED ON A ROCK & TURNED HIS RT ANKLE

EMPLOYEE WAS TR2ING TO ROLL A HOIST TO PUT THE RADISTOR ON THE 980 LOADER EXCESSIVE PULLING CAUSED TENDON TO BREAK IN UPPER RIGHT ARM EMP DID NOT LOSE TIME FROM WORK AT TIME OF INJURY BUT DR FOREMAN STATED 0URTHER TREATMENT IN FORM OF SURGERY MAY BE NECESSARY TO REPAIR TORN TENDON I NAME DID HAVE SURGERY ON 5 15 86 AND RETURNED TO WORK ON 5 19 86

EMPLOYEE WAS HELPING TO CHANGE GRIZZLEYS BY TIGHTENING BOLTS WITH AN IMPACT WRENCH THE PIN HOLDING SOCKET TO WRENCH SLIPPED OUT CUTTING HIM THROUGH MIDDLE FINGER, AND BETWEEN MIDDLE AND INDEX FINGER ON LEFT HAND

EE WAS TIGHTENING BOLT ON LAWNMOWWER WRENCH SLIPPED WHICH CAUSED THE MIDDLE FINGER OF THE LEFT HAND TO COME IN CONTACT W/ LAW MOWER BLADE. FINGER WAS CUT REQUIRING 4 STITCHES.

HARRY HAD JUST STARTED TWO HAULAGE TRUCKS AND HAD GONE INTO THE LUBE SHED TO TALK TO TERRY MOSES. WHILE TALKING TO TERRY, HARRY COLLAPSED. HE WAS COVERED WITH A BLANKET AND COMFORTED. A SHORT TIME LATER CPR WAS STARTED ON HARRY BY DOUG LACKE.

HELPING RUN RIP-RAP SAMPLE WHEN ROCK FELL ON FOOT,LACERATING AND FRACTURING LEFT GREAT TOE.

USING POWER WASHER HIGH PRESSURE HOSE BROKE BURN FROM HOT WATER ON ABDOMEN 2ND DEGREE BURN