Magnum Mine Coal

WHILE MAKING A BELT SPLICE, HIS FINGER WAS STRUCK BY A HAMMER.

INJURED WAS OPERATING A SHUTTLE CAR IN #4 ENTRY.HE RAN THROUGH A FLY PAD; PUT HIS ARM OUT OF SHUTTLE CAR TO HELP MOVE CURTAIN TO IMPROVE HIS VISION.HE STRUCK HIS ARM ON A MINE TIMBER.THIS ACC IDENT OCCURRED EAST MAINS SECTION.

BOLT CREW WAS PUTTING UP 1INX8IN BOARDS I NAME PUT HIS HAND OVER THE BOARD TO LINE UP HOLE THE HELPER LET THE END OF THE BOARD DOWN CAUGHT I NAME HAND BETWEEN THE BOARD & THE TOP OF BOLTER

ROOF FALL #3 INTERSECTION 40' ABOVE SPAD #3965. APPROX 5' TO 7' IN THICKNESS X 18' WIDE X 50' LONG. 48" RESIN BOLTS WITH STRAPS USED. WEST MAIN PARALLEL SECTION.

EE WAS LIFTING BELT WITH A BAR.

ROOF FALL 2 X-CUT INBY SPAD #3044.500'FROM FACE. 6'HIGH X 20'WIDE X 20'LONG.IT WILL BE CLEANED UP.

ROOF FALL 2 BREAKS INBY SPAD #3083- 20' WIDE X 50' LONG X 5-7' HIGH.

ROOF FALL #2 ENTRY - WEST MAINS SECTION- 1 BREAK OUTBY SPAD 3086. 80'L X 20'W X7' HIGH.

WHILE LOADING SUPPLIES ON BOLTER, INJURED HURT HIS BACK. HE WAS LIFTING A BOX OF RESIN.

ROOF FALL 55 FT LONG, 20 FT WIDE, 3 TO 4 FT THICK 3 BREAKS OUTBY FACE.

WHILE OPERATING RAM CAR I NAME RAN OVER ROUGH ROAD AND WAS BOUNCED IN CAB

WHILE RUNNING MOTOR EE RAN OVER ROUGH BOTTOM WHICH BOUNCED HIM INTO CANOPY.

HELPING TO INSTALL BELT DRIVE ROLLER ROLLER SLIPPED AND MASHED FINGER ON R HAND AGAINST BELT HEAD FRAME

THE ACCIDENT WAS DUE TO FAULTY ROOF, THE ROOF FELL 10 FEET ABOVE ANCHORAGE IN A AREA WHERE THE MINE WAS BEING DEVOLPED UNDER A WATER HAD CASUED THE DETERIATION OF THE STRATA.

LOOSE COAL FELL FROM THE TOP CATCHING INJUREDS FINGER BETWEEN COAL AND ROOF BOLTING MACHINE FRAME.

RFOOF FALL 18FT.WIDE X20 TO 30FT.LONG X4.5FT.THICK #4 ENTRY NEAR SPAD #5395

5 BREAKS OFF SECTION 11 OUTBY SPAD 812 #2 ENTRY RETURN VENTILATION OF TRAVEL NOT AFFECTED 30 FT LONG X 5 FT HIGH X 14 FT WIDE 48 IN RESIN BOLTS

THE INJURED WAS PULLING THE CABLE OUT OF THE ROOF BOLTING MACHINE IN THE NUMBER 5 ENTRY WHEN A 4 INCH BY 2 INCH PIECE OF TOP FELL,STRIKING HIM ON THE LEFT SHOULDER.

19'WIDE X 30'LO3G X 4'HIGH.350'OUTBY SECTION AT SPAD #349.3'CONV BOLTS.

ROOF FALL #6 EN7RY 800OUTBY SECTION 5FT TO 6FT HIGH 19FT WIDE-60FT LONG 4FT RESDIN BOLTS USED

PULLING PILLARS3ON 1ST RIGHT PANEL OFF MAINS- PILLAR FALL APPROX. 15 FEET HIGH FELL ON MINER.

2 BREAKS INBY S1AD #5778.#7 ENTRY 40'LONG X 17'WIDE X 4-6'HIGH.

1 BREAK INBY #5779.39'LONG X 19'WIDE X 6-8'HIGH.

2 BREAKS INBY S1AD #5777 40'LONG X 19'WIDE X 4-6'HIGH.#6 ENTRY.

ROOF FALL ACCID9NT OCCURRED INVOLVING I.NAME. I.NAME WAS HELPING ON A LEE NORSE 265 MINER WHEN A ROCK APPROX 7'L X 5'W & 11" THICK, FELL OUT BETWEN BOLTS; THUS STRIKING I.NAME. THE ACCIDENT HA PPENED IN #5 EN7RY-APP 38' FROM SPAD #6988

3/X4 1/2 X19 AT 2 BREAKS OUTBY SPAD IN #6 ENTRY OF MAINS SECTIONS

30X4 1/2 X19 AT SPAD 5676

1.X4 1/2 X20 AT 20 BREAKS OUTBY MAINS SECTION IN #6 ENTRY

FALL 6X19X40 IN #1 ENTRY OF SECTION 001 ONE BREAK INBY SPAD 6220

4 1/2 HIGH X 190T WIDE X50 FT LONG IN LOB #8 ROOM ON 001 SECTION

4 1/2X19X20 5 BREAKS OUTBY FACE IN #5 ENTRY IF 001 SECTION

4 1/2X20X180 AT 10 BREAKS OUTBY FACE FROM #3 ENTRY TO #5 ENTRY 003 SECTION

4 1/2 X19X40 IN #3 ENTRY OF 003 SECTION

24X24X4 1/2 AT 3 BREAKS INBY SPAD 6384

65X6X19 WIDE AT SPAD 5892

19X30X4 1/2 ONE BREAK INBY SPAD 5447

4X19X20 3 BREAKS INBY SPAD 5450

CUTTING MACHINE WAS PARKED IN CORSSCUT OF 5 AND 6 ENTRY. OTHER EMPLOYEE, CUTTING MACHINE OPERATOR, DECIDED TO TIGHTEN UP BITS ON CUTTER. WHILE L HIM. OTHER EMPLOYEE WAS HAVING TROUBLE TIGHTENI NG BITS AND I,NAME VOLUNTEERED HELP. AS SOON AS I,NAME GRABBED WRENCH, HE RECEIVED AN ELECTRICAL SHOCK. I,NAME WAS TRANSPORTED TO THE RALEIGH GENERAL HOSPITAL AND WAS OBSERVED AND RELEASED.

19X50?5 #4 ENTRY OF #2 PANEL

#6 INTAKE ENTRY FELL IN INTERSECTION 60 FT INBY SPAD 4353 ABOUT 3 FT HIGH DUE TO UNDETECTED WEAK ROOF STRATA

WAS STEPPING DOWN FROM A BULLDOZER TURNED ANKLE AND INJURY IT