Malloy Bridge Plant 1201 has $6K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Malloy Bridge Plant 1201.
Fatalities
0
Total incidents
51
Years on record
1983–2017
Latest incident
Dec 2017
Compliance record
MSHA citations since 2000
60
citations
6
significant & substantial
$6,451
proposed penalties
$6,451
paid to date
100% of proposed penalties paid to date, a $0 gap.
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 754 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Malloy Bridge Plant 1201 has $6K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$6K
proposed penalties
$6K
current assessed
$6K
paid to date
$0
outstanding
59 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2023-03-29.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2022-08-04, 4 years ago
0%
of limit-tested samples over the exposure limit
12
samples
1
limit-tested
Most sampled contaminants
Respirable dust, <.1mg10
Quartz, respirable, >1% Qtz1
Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (12)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2022-08-04
Respirable dust, <.1mg
0
Washer Operator
2022-08-04
Respirable dust, <.1mg
0
Front-end Loader Operator
2015-09-16
Respirable dust, <.1mg
0
Washer Operator
2015-09-16
Unlisted Particulate, respirable, <1% Qtz
0.12
Front-end Loader Operator
2015-09-16
Respirable dust, <.1mg
0
Utility Man
2012-06-27
Quartz, respirable, >1% Qtz
0.16
1.74
0.09
Laborer, Bullgang
2012-06-27
Respirable dust, <.1mg
0
Front-end Loader Operator
2012-06-27
Respirable dust, <.1mg
0
Crusher Oper/Worker
2009-04-22
Respirable dust, <.1mg
0
Front-end Loader Operator
2006-01-10
Respirable dust, <.1mg
0
Laborer, Bullgang
2006-01-10
Respirable dust, <.1mg
0
Front-end Loader Operator
2006-01-10
Respirable dust, <.1mg
0
Track Man/Gang
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Malloy Bridge Plant 1201 recorded 0.00 reportable injury cases per 100 full-time workers in 2019.
Injury rate, 2019
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.94 and the all-US-mining average was 2.32 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 1.84 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2019 *
0.00
0.00
0.000
2018 *
0.00
0.00
0.000
2014 *
0.00
0.00
0.000
2013 *
0.00
0.00
0.000
2012 *
0.00
0.00
0.000
2004 *
0.00
0.00
0.000
2003 *
0.00
0.00
0.000
2002 *
10.21
0.00
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2024
0
2023
4
2022
9
2021
9
2020
11
2019
16
2018
16
2017
9
2016
6
2015
9
2014
8
2013
8
2012
8
2011
7
2010
6
2009
9
2008
6
2007
8
2006
9
2005
8
2004
10
2003
11
2002
15
2001
13
2000
15
Source: MSHA quarterly employment and production, updated weekly.
Malloy Bridge Plant 1201 sits in Ellis County, Texas, where the Census mining category is 0.7% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Ellis County, Texas · Population 203,927
0.7%
Mining share of county employment
$95,898
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Employee experienced shoulder pain while opening and closing a window in the office. Employee was sitting down while opening the window, overextending shoulders. The pain progressed throughout the week. Employee requested to go to the doctor on 12/18/2017.
While installing tracks on a John Deere 750 Excavator, the 20' chain that was hooked from the bucket to the tracks to pull the track onto the track frame broke, striking the employee that was standing approximately five feet from the left track frame on the left forearm, hand and forehead. Employee was examined by physician and released to restricted duty.
2005 · 3 incidents
October 27, 2005TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
Employee was repairing (pit) water pump, when he stepped away from pump to wave over the trackhoe operator. The employee fell, causing pain and swelling on right knee. He was placed on light duty, will follow-up with Doctor on 11-14-05.
August 16, 2005TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
EE WAS INSTALLING REPAIRED LIFT CYLINDER ON A 750 JOHN DEERE TRACKHOE HE POSITIONED A LADDER AGAINST THE BOOM OF THE EXCAVATOR AS THE CYLINDER WAS LIFTED UP AND CLOSE ENOUGH FOR HIM TO REACH THE LADDER STARTED TO SLIDE ALONG THE BOOM OF THE EXCAVATOR HE THEN LOST HIS BALANCE AND FELL AND STRUCK THE REAR BUMPER OF SERVICE TRK RESULTING IN PAIN TO LEFT SHOULDER
August 16, 2005TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
EE was installing repaired lift cylinder on a 750 John Deere trackhoe he positioned a ladder against the boom of the excavator, as the cylinder was lifted up and close enough for him to reach, the ladder started to slide along the boom of the excavator. He then lost his balance, fell & struck the rear bumper of the service truck resulting in pain to left shoulder & neck.
2002 · 2 incidents
July 8, 2002TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techOTHER
Arcosa Aggregates,Inc · Absorption of radiations, caustics, toxic and noxious substances
PICKING UP PIPE FROM RACK AT PIT 201 WASP NEST INSIDE PIPE.
March 14, 2002TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDLING OF MATERIALS
Arcosa Aggregates,Inc · Absorption of radiations, caustics, toxic and noxious substances
GETTING ANTI-FREEZ FOR HAL TRUCK & TURNED THE MINERAL SPIRIT DEGREASER ON INSTEAD.
2000 · 1 incident
August 14, 2000TX · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerPOWERED HAULAGE
WHILE RETREIVING A DROPPED CLIPBOARD EE LOOKED DOWN AND STRUCK THE SIDE OF A LUFKIN END DUMP WAS TAKEN FOR A DRUG SCREEN AND HE STATED HE WASNOT HURT. WAS DISCHARGED FOR THIS INCIDENT. 8 DA YS LATER HE WET TO DR FOR BACK PAIN. IS OFF FOR BACK STRAIN
April 14, 1998TX · Metal/Non-Metalcrane operator, mobile equipment operator (meo), dragline operator, dropball operator, riggerSTRIKING OR BUMPING
WAS TARPING TRAILER, WENT UNDER TRAILER TO GET TO OTHER SIDE OF TRAILER AND GOT POKED BY ROLLOVER TARP HANDLE IN NECK AREA, CAUSING PAIN.
1997 · 1 incident
October 10, 1997TX · Metal/Non-Metalcrane operator, mobile equipment operator (meo), dragline operator, dropball operator, riggerSLIP OR FALL OF PERSON
EE WAS WALKING BESIDE DRAGLINE & STEPPED INTO A DRILL HOLE WITH HIS RT LEG & HIS LEFT KNEE BUCKLED
March 30, 1995TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
DUE TO HORSEPLAY, WAS TALKING TO ANOTHER EMPLOYEE WHILE GETTING READY TO CALL OUT. ANOTHER EMPLOYEE WAS IN HIS CAR GOING HOME AND HE WAS BUMPED ON THE KNEE BY THE CAR.
August 6, 1994TX · Metal/Non-Metalhaul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driverSLIP OR FALL OF PERSON
DRIVER WAS CLEANING BED OF DUMP TRUCK WITH SHOVEL & WATER HOSE. LOWER BACK STARTED HURTING SOME TIME LATER.
January 20, 1994TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
EMPLOYEE WAS OILING 190-D DRAGLINE, WAS TURNING FAIR LEAD AND GOT PINKIE FINGER HUNG WHEN HE TRUNED IT AND IT CUT ABOUT ONE THIRD OF HIS PINKIE OFF. AMPUTATION TO FIRST JOINT PER CALL.
March 19, 1990TX · Metal/Non-Metalhaul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driverHANDLING OF MATERIALS
EMPLOYEE WAS STEPPING OUT OF TRUCK HE STEPPED DOWN AND MISSED ON THE TRUCK AND HE TWISTED HIS LOWER BACK.
November 15, 1989TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
LIFTING ASSEMBLY FELT SHARP PAIN IN BACK.THAT NIGHT BACK BECAME TIGHT WITH PAIN.SAW DR NEXT DAY AND WAS PUT TO BED REST.PAIN CONTINUED TO INCREASE,SAW DR AND NO IMPROVEMTN WAS MADE.
January 26, 1989TX · Metal/Non-Metalfront-end loader, scraper-loader operator, pan operator, payloader, scraper rig operatorSLIP OR FALL OF PERSON
EMPLOYEE WAS LOADING HOUSE ROLLER SHAFT INTO THE TRUCK WITH ANOTHER EMPLOYEE THE OTHER EMPLOYEE DROPPED HIS END THE SHAFT AND IT FELL ON I NAME S HAND.
EMP WA LOADING HOUSE ROLLER SHAFT INTO TRUCCK WIHT ANOTHER EMP OTHER EMP DROPED HIS END OF SHAFT AND IT FELL ON INJ HAND.
October 20, 1988TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
EMP WAS ADDING OIL TO GEAR DRIVE ON DRABGLINE HE WAS WALKING ON CATWALK OF MACHINE AND SLIPPED AN HIT KNEE ON HAND RAIL UPRIGHT.
August 8, 1988TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
EMPLOYEE WAS HE5PING MECHANIC WORK ON A TRUCK. THEY WERE TRYING TO REPLACE A BUSHING AT THE TIME OF THE ACCIDENT. I,NAME WAS WORKING TO LOOSEN THE BUSHING, HE PINCHED HIS HAND BETWEEN THE BALL OF THE TRUCK A3D THE REAR AXLE. THE TRUCK SHIFTED AND HIS HAND WAS CAUGHT, CRUSHING HIS THE LITTLE FINGER ON RT HAND.
April 10, 1987TX · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
EMPLOYEE WAS UN5OADING PEAT MOSS OFF TRUCK, THE BAGS WERE FROZEN TOGETHER, HE PULLED ON ONE TO RELEASE IT FROM ANOTHER BAG, HE THEN FELL OUT OF THE VAN & FELL ON HIS BACK.
EMPL PUTTING FU9L IN EQUIPMENT STEPPED DOWN SLIPPED AND SLID DOWN HITTING RIGHT KNEE AND LANDING ON GROUND.
November 19, 1986TX · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
EMPLOYEE WAS WORKIN GON AN AMERICAN DRAGLINE WHEN A BRACKET FELL ON HIS LEFT HAND HE PULLED HAND BACK IT CAUGHT ONLY HIS LEFT INDEX FINGER AND CUT IT PARTIALLY OFF
Related mines
Other mines operated by Arcosa Aggregates Texas, LLC