EE said he strained his back when lifting a shive wheel for a belt take up unit.
Mine No 3: 124 MSHA citations Coal
Mine No 3 has $48K in proposed MSHA penalties and $207 outstanding across 2 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Mine No 3.
- Fatalities
- 0
- Total incidents
- 10
- Years on record
- 2008–2012
- Latest incident
- Apr 2012
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Mine No 3 has $48K in proposed MSHA penalties and $207 outstanding across 2 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 4 · 67%
- Stood as issued 2 · 33%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| WEVA 2009-72 | Settlement | Lesnick | 2010 | $8K → $2K |
| WEVA 2009-216 | Default | Lesnick | 2010 | $4K → $4K |
MSHA sampling at Mine No 3 shows 96% of 169 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2012-03-26, 14 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- CONTINUOUS MINER OPERATOR84
- SHUTTLE CAR OPERATOR (STANDARD SIDE)17
- ROOF BOLTER (SINGLE HEAD)9
Silica (quartz)
Last sampled: 2012-03-09, 14 years ago- CONTINUOUS MINER OPERATOR8
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2011-11-04, 14 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- SHUTTLE CAR OPERATOR (STANDARD SIDE)7
- CONTINUOUS MINER OPERATOR4
- ROOF BOLTER (SINGLE HEAD)4
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2012 | 88% | 17 |
| 2011 | 97% | 71 |
| 2009 | 97% | 33 |
| 2008 | 96% | 48 |
| Year | silica avg (%) | samples |
|---|---|---|
| 2012 | 5.6 | 1 |
| 2011 | 6.2 | 4 |
| 2009 | 8.9 | 2 |
| 2008 | 8.1 | 4 |
| Year | over PEL | samples |
|---|---|---|
| 2011 | 0% | 14 |
| 2008 | 0% | 15 |
Mine No 3 recorded 15.02 reportable injury cases per 100 full-time workers in 2012.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2012 * | 15.02 | 7.51 | 0.000 |
| 2011 * | 0.00 | 0.00 | 0.000 |
| 2008 * | 6.41 | 3.20 | 0.000 |
- C K Coal Corp 2008 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2012 | 18 | 109,127 |
| 2011 | 40 | 342,749 |
| 2010 | 0 | |
| 2009 | 36 | 265,843 |
| 2008 | 32 | 366,909 |
| 2007 | 0 |
Mine No 3 sits in Mingo County, West Virginia, where the Census mining category is 15.0% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2012 Q4 | 0 | 0 | 0 | |
| 2012 Q3 | 0 | 0 | 0 | |
| 2012 Q2 | 3,998 | 2 | 2 | 500.3 |
| 2012 Q1 | 22,634 | 9 | 3 | 397.6 |
| 2011 Q4 | 22,087 | 12 | 5 | 543.3 |
| 2011 Q3 | 22,804 | 12 | 7 | 526.2 |
| 2011 Q2 | 24,275 | 11 | 6 | 453.1 |
| 2011 Q1 | 15,995 | 2 | 0 | 125.0 |
Show 9 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2010 Q4 | 0 | 0 | 0 | |
| 2009 Q3 | 7,283 | 1 | 1 | 137.3 |
| 2009 Q2 | 22,375 | 8 | 3 | 357.5 |
| 2009 Q1 | 21,707 | 5 | 1 | 230.3 |
| 2008 Q4 | 23,033 | 14 | 5 | 607.8 |
| 2008 Q3 | 18,807 | 13 | 2 | 691.2 |
| 2008 Q2 | 17,099 | 13 | 3 | 760.3 |
| 2008 Q1 | 3,474 | 0 | 0 | 0.0 |
| 2007 Q4 | 0 | 0 | 0 |
Reportable incidents
10 on file2012 · 6 incidents
EE said mantrip hit rock or hole and jolted him causing lower pain.
We had a roof fall measuring 4 to 5 feet thick X 19 to 20 feet wide X 70' in distance. This fall is a continuance of a fall reported on 1/5/12 on the 2nd North West Mains @ Spad #1341 in the #4 and #5 entries. This fall does not impede ventilation or travel-The fall will not be cleaned up-There were no injuries.
A roof fall in old works in No 7 Entry 70 ft inby spad No 1130 approx 10 ft wide, 10 ft long, about 5 ft high. the fall will not be cleaned up.
A roof fall occurred on 1-5-12 in 2nd North West Mains at spad #1341. The fall is approx 30 to 35 ft long, 20 ft wide and 4 1/2 to 5 ft thick (no injuries) and the fall occurred in old works and will not be cleaned up (in #5 Entry)
A roof fall occurred in the old works (in rooms) in 5th Right off 2nd North West Mains at spad No. 1364 No. 6 Entry. The fall is approx 30 to 35 ft long, 20 ft wide and 4 1/2 ft to 5 ft thick (Ht). The fall will not be cleaned up.
2011 · 1 incident
Mechanic was performing maintenance on John Deere 850c Dozer when he slipped and fell from the tracks to the ground injuring left leg.
2009 · 1 incident
Employee was removing gob from #4 tailpiece. The gob was coal and rock mixture, a piece of rock fell thru and rolled onto right index finger, smashing the employees finger.
2008 · 2 incidents
He was installing curtain boards and when he was removing drill steel, he rotated the steel and the drill steel hit his forearm.
EE was cutting a zip tie and the blade came out and cut his right hand.