Mining Incidents

Naruna Quarry: 67 MSHA citations Metal/Non-Metal

APAC Texas, Inc. · Surface
Controlled by CRH PLC
Naruna, Burnet County, TX  ·  Abandoned
MSHA Mine ID: 4104468

Naruna Quarry has $17K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Naruna Quarry.

Fatalities
0
Total incidents
7
Years on record
2007–2011
Latest incident
Oct 2011
Compliance record
MSHA citations since 2005
67
citations
18
significant & substantial
$17,318
proposed penalties
$16,318
paid to date
94% of proposed penalties paid to date, a $1,000 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2004
33
inspections on record
385
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 385 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Naruna Quarry has $17K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$17K
proposed penalties
$16K
current assessed
$16K
paid to date
$0
outstanding
66 assessments are final orders; 1 contested dockets.
Of $12K in penalties contested before the Commission, $5K was upheld in final decisions.
As of the most recent assessment on 2014-05-06.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
27.3%
significant & substantial
3.0%
high negligence or reckless
27.3%
reasonably likely or greater
53.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 16.7% low, 80.3% moderate, 3.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2 citations taken to the federal commission · 3% of citations on record
  • Settled 1 · 50%
  • Vacated or withdrawn 1 · 50%
50%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 2 decided S&S contests · industry: 79%
58%
Penalty reduction in decided contests
$12K proposed, $5K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2007-03-20.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2007-158M Settlement Zielinski 2007 $12K → $5K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2013-04-16, 13 years ago
0%
of limit-tested samples over the exposure limit
12
samples
7
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz6
  • Respirable dust, <.1mg4
  • Nuisance dust, respirable, <1% Qtz1
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (12)
Date Contaminant Concentration Limit Conc / limit Occupation
2013-04-16 Respirable dust, <.1mg 0 Complete Load-Haul-Dump
2013-04-16 Quartz, respirable, >1% Qtz 0.14 1.25 0.11 Crusher Oper/Worker
2013-04-16 Respirable dust, <.1mg 0 Complete Load-Haul-Dump
2010-07-13 Unlisted Particulate, respirable, <1% Qtz 0.26 Crusher Oper/Worker
2010-07-13 Quartz, respirable, >1% Qtz 0.26 1.77 0.15 Laborer, Bullgang
2010-07-13 Respirable dust, <.1mg 0 Truck Driver
2008-01-17 Quartz, respirable, >1% Qtz 0.53 1.64 0.32 Utility Man
2008-01-17 Nuisance dust, respirable, <1% Qtz 0.28 10 0.03 Truck Driver
2008-01-17 Respirable dust, <.1mg 0 Front-end Loader Operator
2007-06-05 Quartz, respirable, >1% Qtz 1.08 1.18 0.92 Crusher Oper/Worker
2007-06-05 Quartz, respirable, >1% Qtz 0.25 1.28 0.20 Crusher Oper/Worker
2007-06-05 Quartz, respirable, >1% Qtz 0.36 1.25 0.29 Laborer, Bullgang
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Naruna Quarry recorded 7.33 reportable injury cases per 100 full-time workers in 2011.

Injury rate, 2011
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
7.33
total case rate
7.33
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 2.56 and the all-US-mining average was 3.08 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 2.67 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2011 * 7.33 7.33 0.000
2010 * 0.00 0.00 0.000
2009 * 4.90 0.00 0.000
2008 * 7.54 0.00 0.000
2007 * 8.49 0.00 0.000
2006 * 0.00 0.00 0.000
2005 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Lindsey Materials 2004 to 2010
  2. Lindsey Contractors, Inc. 2010 to 2011
  3. APAC Texas, Inc. 2011 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2014 8
2013 6
2012 7
2011 14
2010 16
2009 17
2008 27
2007 22
2006 18
2005 18
2004 10
Source: MSHA quarterly employment and production, updated weekly.

Naruna Quarry sits in Burnet County, Texas, where the Census mining category is 1.5% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Burnet County, Texas · Population 51,064
1.5%
Mining share of county employment
$77,158
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2014 Q2 3,712 1 0 269.4
2014 Q1 4,718 0 0 0.0
2013 Q4 4,066 4 0 983.8
2013 Q3 4,739 0 0 0.0
2013 Q2 4,815 2 1 415.4
2013 Q1 1,889 0 0 0.0
2012 Q4 1,641 0 0 0.0
2012 Q3 7,602 0 0 0.0
Show 32 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2012 Q2 4,779 1 0 209.2
2012 Q1 4,314 0 0 0.0
2011 Q4 2,643 2 0 756.7
2011 Q3 9,213 1 0 108.5
2011 Q2 6,593 0 0 0.0
2011 Q1 8,849 4 2 452.0
2010 Q4 10,615 0 0 0.0
2010 Q3 9,626 4 2 415.5
2010 Q2 9,662 0 0 0.0
2010 Q1 7,447 4 2 537.1
2009 Q4 9,025 0 0 0.0
2009 Q3 8,340 1 0 119.9
2009 Q2 11,732 0 0 0.0
2009 Q1 11,732 0 0 0.0
2008 Q4 11,375 0 0 0.0
2008 Q3 13,846 4 0 288.9
2008 Q2 16,525 0 0 0.0
2008 Q1 11,310 0 0 0.0
2007 Q4 13,311 0 0 0.0
2007 Q3 12,313 0 0 0.0
2007 Q2 11,883 6 1 504.9
2007 Q1 9,626 0 0 0.0
2006 Q4 10,707 2 0 186.8
2006 Q3 17,457 5 2 286.4
2006 Q2 10,904 0 0 0.0
2006 Q1 11,237 21 8 1868.8
2005 Q4 11,926 0 0 0.0
2005 Q3 7,888 0 0 0.0
2005 Q2 8,102 0 0 0.0
2005 Q1 6,666 4 0 600.1
2004 Q4 4,290 0 0 0.0
2004 Q3 4,530 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

7 on file

2011 · 2 incidents

October 18, 2011 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Lindsey Contractors, Inc. · Fall from machine

Employee lost grip with hands and fell from operators platform outside of cab fell approx. 8ft,injury to ankle and back

June 29, 2011 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman OTHER
Lindsey Contractors, Inc. · (Not Elsewhere Classified)

Employee became ill complaining of chest pain and dizziness. 911 was called, he was transported to Lampasas Hospital. He was diagnosed with ruptured ulcer on colon.

2009 · 1 incident

March 18, 2009 TX · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Lindsey Materials · Fall to lower level, (Not Elsewhere Classified)

Employee was standing on wet rock, slipped down, right arm stopped fall.

2008 · 2 incidents

August 22, 2008 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Lindsey Materials · Fall from machine

Wet, muddy ground, employee was stepping up on to the crusher to work on the crusher, his foot slipped and he hit the left side of his head causing injury to left side of face and left eye. He did refuse medical care, but changed his mind, and was taken to dr around 9:10 am.

February 28, 2008 TX · Metal/Non-Metal outside foreman, leadman MACHINERY
Lindsey Materials · Struck by... (Not Elsewhere Classified)

Employee was using 4" grinder on Excavator EX-3 in a tight area when he slipped and the grinder cut his forehead requiring six stiches.

2007 · 2 incidents

July 23, 2007 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman OTHER
Lindsey Materials · Struck by flying object

A gust of wind blew dust in his eye.

May 23, 2007 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Lindsey Materials · Caught in, under or between a moving and a stationary object

Employee was assisting three co-workers change a bearing on the primary shaker. As they installed the counter weight, which was being held in place by a come-along, which in turned slipped causing employee to get his hand caught. Injury turned out to be minor contusion.