PUEBLO CONCRETE Metal/Non-Metal

EE WAS CHANGING BELTS ON THE CONVEYOR, WHEN HE PICKED UP THE GUARD TO RE-INSTALL IT, HE STRAINED HIS BACK.

EE WAS BENDING A PIECE OF REBAR TO USE AS FILL FOR A WELD. HE STUCK THE BAR IN A HOLE IN THE WELD TRUCK AND WAS PULLING ON IT. THE BAR SLIPPED OUT OF THE HOLE AND HE WAS STRUCK BY THE BAR.

EE WAS REMOVING THE PAN LINERS ON THE CONVEYOR, HE HAD ALL THE LINERS LOOSE BUT TWO WHEN HE STEPPED ON A LOOSE PAN WHICH FELL OUT, HIS OTHER LEG WHICH WAS ON THE LAST PAN THEN BROKE THROUGH TH AT PAN AND EE FELL ABOUT 4' TO THE GROUND.

EE WAS FUELING THE GENERATOR WHICH IS LOCATED IN A SEMI-TRAILER. HE HAD FINISHED FUELING THE GENERATOR AND DECIDED TO JUMP DOWN BETWEEN THE TRAILER AND THE FUEL TRUCK, HIS FOOT CAUGHT ON THE F DOOR SILL AND HE FELL ONTO THE SIDE OF THE FUELTRUCK.

EE WAS GRINDING WITH SAFETY GLASSES NO GOGGLES AND FACE SHIELD. A PARTICLE OF METAL EMBEDDED IN R EYE

EE WAS CLEANING UNDER CONVEYOR #5320. HE ASKED THE SKID STEER OPERATOR TO LIFT THE CONVEYOR SO HE COULD PLACE CRIBBING BLOCKS UNDER THE TAIL PULLY MOUNTS. THE OPERATOR THOUGHT EE SIGNALLED HIM TO LOWER THE CONVCEYOR & LOWER IT WHICH PINCHED EE'S THUMB BETWEEN THE CONVEYOR & A BLOCK.

HE WAS CLEANING THE DECK WITH A HAMMER. HE HIT A ROCK WITH THE HAMMER AND THE ROCK HIT HIM ON THE FOREHEAD.

WHEN GRINDING A WELD, THE BLADE BROKE AND CUT HIS RIGHT INDEX FINGER ON TOP OF THE KNUCKLE.

HE THOUGHT THE SWITCH TO THE FEED CONVEYOR WAS TURNED OFF AND DIDN'T TEST IT. HE TRIED TO REPLACE A FUSE AND THAT CUASED AN EXPLOSION, BURNING HIS RIGHT HAND.

HE STEPPED ON UNEVEN GROUND AND TWISTED HIS RIGHT ANKLE.

EMP WAS CLEANING ROCKS OUT OF THE GRIZZLY AND SMASHED FINGER BETWEEN THE PIPES AND THE ROCKS.

WAS PULLING ROCKS OFF OF A CONVEYOR AND NOTICED PAIN IN LEFT SHOULDER AND BOTH WRISTS.

HE WAS UNLAODING SCREEN FOR GRAVEL PLANT AND FELT A SHARP PAIN INHIS RIGHT SHOULDER.

HE WAS PUTTING OIL IN LOADER. HE WAS GOING UP LADDER AND PULLING 5 GALLON CAN OF OIL UP ON LOADER.

HIS HAND SLIPPED ON BOLT AND CAUSED HIS HAND TO HIT ANGLE ON MOTOR FRAME.

LIFTING VIBRATOR OUT STUMBLED & MASHED FINGER BETWEEN HOPPER & VIBRATOR

HE WAS HOOKING UP WELDER TO MOVE WHEN IT ROLLE DNAD CAUGHT HIS FINGER BETWEEN THE HITCH AND THE BACK OF THE SKIDSTEER.

HE WAS HELPING PUT A VIBRATOR ON A CONVEYOR. HE HAD HIS RIGHT FOOT ON FRONT OF SKID LOADER. HE TOOK HIS LEFT FOOT TO REMOVE BRAKE, BUT HE HIT THE DOWN LEVER AND THE BUCKET FRAME SMASHED HIS RI GHT FOOT.

HE WAS WARMING HIS HANDS BY THE FIRE IN A BARRELAND SOMETHING EXPLODED, AN OBJECT HIT AND CUT HIS FOREHEAD.

HE WENT TO REMOVE A ROCK FROM CONVEYOR AND HE SMASHED HIS RIGHT INDEX FINGER BETWEEN THE ROCK AND CONVEYOR FRAME.

HE WAS PULLING A BIG ROCK OFF THE CONVEYOR BELT. HE SMASHED HIS RIGHT THUMB BETWEEN THE ROCK ROLLER.

HE WAS PICKING ROCKS OFF THE BVELT WHEN TWO BIG ROCKS CAME DOWN I PULLED ONE OFF THE BELT BUT IT WAS STILL ON THE EDGE I PULLED THE SECOND ONE & MY FINGERS WERE CAUGHT BETWEEN THE TWO ROCKS I CUT MY LEFT RING FINGER

HE WAS ON THE PICKING BELT TRYING TO THROW A ROCK OFF, THE BELT WAS TURNED ON AND HE FELL OFF THE BELT AND LANDED ON HIS BACK.

HE STEPPED THROUGH A HOLE WHERE A PREVIOUS SUCTION HOSE EXISTED. HE WAS INSTALLING A NEW PUMP, HE HIT HIS ELBOW ON A BARDGE.

HE WAS ROLLING A BIG ROCK OVER BY THE CONVEYOR. THE ROCK SLIPPED OFF HIS LEFT HAND AND STRAINED RT ARM.

HE WAS PUTTING A ROLLER BACK IN ITS BRACKET & IT SMASHED HIS FINGERS BETWEEN THE ROLLER AND FRAME WITH THE EDGE.

HE WAS PULLING THE CONVEYOR BELT TOGETHER THE BELT BROKE & THE BELT CLAMP CAME OFF & HIT HIS LFT HIP & LEG

HE WAS PRYING A PLATE ON THE CRUSHER AND STRAINED HIS RIGHT SHOULDER.

HE WAS WORKING ON A GEAR BOX. HE PULLED BAR TO WORK THE COM-ALONG WHICH RESULTED IN A DOUBLE HERNIA.

85061S CUTTING A PLASTIC TIE THAT HOLDS THE ELECTRICAL LINE, HE CUT THROUGH THE PLASTIC AND CUT HIS FOREARM.

HE WAS DIGGING AR OUND CONVEYOR & HE SLIPPED & FELL ON THE ICE

TIGHTENING A BOLT ON THE DRY PLATN SHAKER, WHILE DOING THIS THE BOLT BROKE AND HE FELL BACKWARDS OFF OF THE WORK DECK. HE FELL ON HIS BACK HURTING HIS LEFT SIDE AND SHOULDER.

HE WAS CRAWLING UP INSIDE A SHOOT TO PATCH A HOLE,IT WAS A TIGHT FIT AND HIS ARM WAS CUT ON A SHARP PIECE OF METAL.

HE WAS TAKING OFF BELT CLAMPS FROM THE CONVEYOR, A CLAMP POPPED OFF AND CAUGHT HIS FINGER.

HE WAS PICKING BIG ROCKS AND MUD OFF FIELD BELT,A ROCK STUCK IN HOPPER WHEN IT CAME LOOSE IT CARRIED HAND INTO ROLLER.

SHOVELING MATERIAL OUT FROM UNDER CRUSHER,WENT TO THROW IT OUT AND KNEE TWISTED.

PICKING ROCKS OFF BELT AND WRIST POPPED.

HE WAS PICKING A ROCK OFF A BELT AND HIS FINGER GOT CAUGHT BETWEEN THE ROCK AND A ROLLER AND BROKE HIS FINGER.

ON 10-3-90 HE WENT TO DR. BECAUSE HIS SHOULDER WAS HURTING HIM. HE HAS TO RETURN TO DR. SO THEY CAN SHOOT DYE INTO SHOULDER TO FIND EXTENT OF INJURY. HE WAS WORKING ON THE CRUSHER, HE SAW TH E PIT BELT PILING UP, HE RAN TO SHUT OFF THE BELT AND HE CUAGHT HIS SHOULDER ON A BEAM, IT FLIPPED HIM ON HIS BACK.

LACING CONVEYOR BELT ONE CLAMP CAME UNDONE,HIT LEFT ARM & WRIST.

JUMPED DOWN FROM CONVEYOR AND STEPPED ON ROCK AND SPRAINED LEFT ANKLE.

LIFTING METAL PLATE OVER HEAD BY HAND.

A ROCK PASSED BY HIM ON THE CONVEYOR AND HE LEANED OVER TO CATCH IT AND THIS IS WHEN HE HURT HIS CHEST.

WENT TO GRAB ROCK OFF CONVEYOR AND GOT FINGER SMASHED BETWEEN TWO ROCKS.

WAS PULLING ROCK OFF CONVEYOR, ANOTHER ROCK HIT A ROLLER AND FELL OFF CONVEYOR HITTING HIS RIGHT ANKLE.

HE WAS HOLDING DOWN ON A PIECE OF METAL WHILE OTHER EMPLOYEE WAS DRILLING FROM BOTTOM UP. THE BIT WENT THROUGH AND DRILLED HOLE IN RIGHT HAND.

HE WAS ON BOOM TRUCK UNLOADING ROLL OF BELTING. THE BELTING STARTED ROLLING TOWARD HIM. HE JUMPED OFF TRUCK JARRING HIS RIGHT RIBS. RESTRICTED WORK DUTY.

CUTTING METAL WITH TORCH HE TOUCHED A PIECE OF HOT SLAG AND IT BURNED HIS RIGHT PALM IT LATER GOT INFECTED.

SHOVELING AND LIFTING FOR WEEKS CAUSED LOWER ABCK STRAIN.

LIFTED ROCK BY HAND OUT OF CONE AND HE PULLED GROIN MUSCLE.

PR YING BOULDER OUT OF HOPPER IT BOUNCED OFF BELT & FELL ON HIS LEFT FOOT HE HAS A BRUISED LEFT FOOT

HE WAS WELDING A RUSTY CHUTE TOGETHER & A HOT SLUG BLEW UP UNDER HIS HELMET INTO HIS LEFT EYE

WHEN LIFTING A PIECE OF ANGLE BY HAND, HE OVERSTREATCHED AND FELT SOMETHING PULL IN LOWER BACK.

WALKING ACROSS YARD EMPL STEPPED ON LARGE ROCK WITH FRONT PART OF FOOT CAUSING BACK PART TO STRETCH AND TEAR LIGAMENTS.

TAKING ROLLER OFF BRACKET ON CONVEYOR WRENCH HE WAS USING SLIPPED OFF CAUSING ARM TO HIT ROLLER.RIGHT FOREARM BADLY BRUISED.SHORT ARM SPLINT.

TIGHTENING BOLT WITH RATCHET BOLT BROKE I.NAME FELL ON PIECE OF STEEL LEFT INSIDE THUMB HAD DEEP CUT.

CRUSHER WAS SHU7 DOWN & OPERATOR & OILER WAS BOTH ON GROUND I.NAME STARTED GREASING HEAD PULLEYS I.NAME THE OPERATOR WAS TOLT TO GO BACK UP IN TOWER SO HE COULD START & STOP FIELD CONVEYOR WHI CH WE WERE WORK3NG ON HE WENT UP TO START FIELD CONVEYOR & THEN HE WAS TOLD THAT WHILE HE WAS UP THERE HE SHOULD CALIBRATE SCALE ON 3/4ROCK BELT & #2 FEED BELT IN ORDER TO START 3/4 BELT HE H

HAD BEEN CUTTING HOLES WITH TORCH IN SUPER SCRUBBER-PIECE OF SLAG POPPED OFF AND WENT IN BEHIND GOGGLES ON LEFT EYE. BILL THOUGHT IT JUST BURNED HIS EYE LID. AFTER A COUPLE OF DAYS HIS EYES WA WAS HURTING AND HE WENT TO DOCTOR AND FOUND A PIECE OF METAL IN EYE. HE WENT HOME FOR A DAY WENT BACK TO DOCTOR NEXT DAY AT 1020DOCTOR SAID HIS EYE WAS OK.