STRAINED SHOULDER PULLING MINER CABLE.
Rader Run Mine No 1: 51 MSHA citations Coal
Rader Run Mine No 1 has $5K in proposed MSHA penalties and $1K outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Rader Run Mine No 1.
- Fatalities
- 0
- Total incidents
- 22
- Years on record
- 1996–2000
- Latest incident
- Oct 2000
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rader Run Mine No 1 has $5K in proposed MSHA penalties and $1K outstanding across 0 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.MSHA sampling at Rader Run Mine No 1 shows 92% of 38 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2000-09-25, 25 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- CONTINUOUS MINER OPERATOR15
- SHUTTLE CAR OPERATOR (STANDARD SIDE)6
- SCOOP CAR OPERATOR4
Silica (quartz)
Last sampled: 2000-08-23, 26 years ago- CONTINUOUS MINER OPERATOR4
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2000-03-08, 26 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- CONTINUOUS MINER OPERATOR1
- SCOOP CAR OPERATOR1
- SHUTTLE CAR OPERATOR (STANDARD SIDE)1
Rader Run Mine No 1 recorded 22.79 reportable injury cases per 100 full-time workers in 2000.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.- Lady H Coal Company Inc 1991 to 1992
- Lady H Coal Company Inc 1992 to 1993
- Princess Polly Anna Coal Inc 1993 to 2000
- Midland Trail Resources Llc 2000 to 2001
- Raders Run Mining Llc 2001 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2000 | 18 | 227,341 |
Rader Run Mine No 1 sits in Greenbrier County, West Virginia, where the Census mining category is 1.7% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2000 Q4 | 7,161 | 3 | 2 | 418.9 |
| 2000 Q3 | 11,407 | 18 | 4 | 1578.0 |
| 2000 Q2 | 10,485 | 17 | 3 | 1621.4 |
| 2000 Q1 | 14,834 | 13 | 5 | 876.4 |
Reportable incidents
22 on file2000 · 5 incidents
MINER WAS BENT ACROSS MINER WORKING ON THE WATERLINE WHEN HAULER KNOCKED MANTRIP INTO HIS RIGHT LEG.
THE MINE FLOOR WAS MUDDY. EMPLOYEE TWISTED HIS ANKLE TRYING TO FREE FOOT THAT WAS STUCK IN MUD.
HE STATED HE WAS CLEANING #3 HEAD AND TOOK A CATCH IN HIS BACK.
HE WAS CARRYING A 5 GALLON CAN OF FUEL OIL TO PUT IN LOADER.
1999 · 4 incidents
AN UNINTENTIONAL ROOF FALL IN INTERSECTION AT SPAD #90815 RETURN. NO ONE EFFECTED. 20' BY 20' BY 6' HIGH.
A ROOF FALL OCCURRED 3 CROSS CUTS INBY #2 BELT, DRIVE ON 002 SECTION. SPAD #39349, THE FALL WAS 25' FEET LONG 20 FEET WIDE 6 FT THICK. THE AREA WAS BOLTED WITH 4' RESEIN BOLTS.
A ROOF FALL OCCURED IN THE RETURN AIR WAY OF 002, SECTION AT. SPAD 88827. THE FALL WAS 20' WIDE 30' LONG 5 1/2' THICK. THE AREA WAS BOLTED 4 RESIN BOLTS.
A ROOF FALL OCCURRED ONE CROSSCUT OUT BY PILLER LINE ON FIRST RIGHT SECTION 002. SPAD 210-207 AREA WAS BOLTED 4' RESIN BOLTS. FALL WAS 20' WIDE 150'LONG 6' THICK
1998 · 7 incidents
A PORTIN OF ROOF FELL IN AN OUTBY AREA OF THE INTAKE AIRWAY OF THE 1ST RIGHT SECTION. THIS FALL WAS RECENTLY DISCOVERED. 7 BREAKS OUTBY #2 BELT SPAD #88828.
A PORTION OF ROOF FELL DURING VACATION THE WEEK OF THE 4TH OF JULY. THE FALL WAS ON #1 BELT 1ST RIGHT, THE FALL MEASURED APPROX 40FTX20FTX4FT H
EMPLOYEE ROOFED HIS HEAD WHILE OPERATING A UNIHAULER.
EE WAS LOOKING FOR A PROBLEM IN THE HAULER DECK, WHEN HE LEANED OVER INTO THE DECK, HE HIT THE STEERING LEVER AND PINCHED HIMSELF AGAINST THE RIB.
EE AND ANOTHER EE WERE CHANGING BATTERIES. ONE STAND WAS CROOKED AND THEY TRIED TO STRAIGHTEN IT BY HAND. WHILE DOING THIS EE STRAINED HIS BACK BY LIFTING ON THE STAND.
EMPLOYEE TWISTED HIS RIGHT KNEE WHILE PULING MINER CABLE. NOTES: DID NOT FILL OUT ACCIDENT FORM THEM. VICTIM STATED AT TIME HE WAS ALRIGHT.
EMPLOYEE WAS PULLING A PIECE OF ROCK WITH A SLATE BAR WHEN ANOTHER PIECE FELL HITTING HIM ON THE RIGHT KNEE INJURING HIS RIGHT ANKLE.
1997 · 4 incidents
EE WAS SITTING INBY LAST CROSS CUT ON RIGHT RIB. MINER WAS MAKING FIRST LEFT RUN IN 1 RM. WHEN LOOSE RIB ROLLED OFF ON TOP OF A HIM. CAUSING THE INJURY. COAL WAS ABOUT 42" HIGH.
WALKING PAST THE COAL PILE, THE LOADER OPERATOR STEPPED ON A LUMP OF COAL & TWISTED HIS ANKLE.
EE WAS SETTING A BOLT IN THE ROOF. HE LET THE GLUE BOLT SET AND THEN LET THE PRESSURE OFF OF THE HEAD. THIS LET A PIECE OF ROCK LOOSE (APPROX 2' X 2' X 2"), THAT HIT HSI HAND BREAKING HIS MIDD LE FINGER.
EE WAS OPERATING A 810 UNIHAULER. HE WAS GOING AROUND A CORNER WHEN HE CAUGHT MINER CABLE WITH DECK ON HAULER. CABLE PULLED DOWN BENDING HIM OVER IN DECK WHERE HIS CHEST HIT THE STEERING LEVER . 3 FRACTURED RIBS AND BRUISES.
1996 · 2 incidents
EE WAS PLACING THE MINER CABLE AGAINST THE RIB IN THE #7 ENTRY. 3 INTERSECTNS OUTBY THE FACE. A UNIHAULER WAS COMING AT THE ENTRY. SO HE STOPPED AGAINST THE RIB TO WAIT FOR IT TO PASS. A T RAINGULAR PIECE OF DRAW SLATE 65'X53'X5'DX2 12/" X6" THICK FELL AND HIT EE. IT SLID DOWN HIS SIDE PUSHING HIM TO THE MINE FLOOR PINNING HIS LEGS.
STATEMENT FROM EMP - A LUMP OF COAL ROLLED OFF RIB AND STRUCK HIM IN LOWER BACK. LUMP OF COAL WEIGHED APPROX 25 LBS. HEIGHT OF MINES APPROX 42".