Mining Incidents

Romayor Plant: 75 MSHA citations Metal/Non-Metal

Controlled by Summit Materials LLC
Romayor, Liberty County, TX  ·  Abandoned
MSHA Mine ID: 4104893

Romayor Plant has $25K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Romayor Plant.

Fatalities
0
Total incidents
1
Years on record
2024
Latest incident
Apr 2024
Compliance record
MSHA citations since 2011
75
citations
26
significant & substantial
$25,336
proposed penalties
$25,336
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2011
36
inspections on record
394
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 394 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Romayor Plant has $25K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$25K
proposed penalties
$25K
current assessed
$25K
paid to date
$0
outstanding
75 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-01-13.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
34.7%
significant & substantial
13.3%
high negligence or reckless
34.7%
reasonably likely or greater
32.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 4.0% low, 82.7% moderate, 13.3% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2017-04-13, 9 years ago
0%
of limit-tested samples over the exposure limit
6
samples
1
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg3
  • Unlisted Particulate, respirable, <1% Qtz2
  • Quartz, respirable, >1% Qtz1
Show the individual readings (6)
Date Contaminant Concentration Limit Conc / limit Occupation
2017-04-13 Quartz, respirable, >1% Qtz 0.2 0.83 0.24 Mechanic
2017-04-13 Respirable dust, <.1mg 0 Bulldozer Operator
2017-04-13 Respirable dust, <.1mg 0 Rotary Bucket Ex. Operator
2011-08-31 Unlisted Particulate, respirable, <1% Qtz 0.16 Front-end Loader Operator
2011-08-31 Respirable dust, <.1mg 0 Hydrating Plant Operator
2011-08-31 Unlisted Particulate, respirable, <1% Qtz 0.22 Shovel Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Romayor Plant recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 1.17 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 5.75 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
2016 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Multisource Sand & Gravel LTD 2011 to 2020
  2. Alleyton Resource Company, LLC. 2020 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 2
2025 13
2024 17
2023 21
2022 14
2021 7
2020 8
2019 12
2018 11
2017 8
2016 11
2015 11
2014 11
2013 10
2012 9
2011 7
Source: MSHA quarterly employment and production, updated weekly.

Romayor Plant sits in Liberty County, Texas, where the Census mining category is 2.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Liberty County, Texas · Population 97,993
2.0%
Mining share of county employment
$64,773
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 0 0 0
2026 Q1 4,091 1 0 244.4
2025 Q4 8,400 0 0 0.0
2025 Q3 6,230 2 0 321.0
2025 Q2 7,863 0 0 0.0
2025 Q1 7,265 4 1 550.6
2024 Q4 7,893 0 0 0.0
2024 Q3 8,611 0 0 0.0
Show 52 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 8,480 1 0 117.9
2024 Q1 9,812 0 0 0.0
2023 Q4 9,163 1 0 109.1
2023 Q3 9,226 0 0 0.0
2023 Q2 10,503 0 0 0.0
2023 Q1 10,828 3 1 277.1
2022 Q4 12,110 0 0 0.0
2022 Q3 12,940 0 0 0.0
2022 Q2 12,235 0 0 0.0
2022 Q1 6,676 0 0 0.0
2021 Q4 6,200 0 0 0.0
2021 Q3 3,145 0 0 0.0
2021 Q2 4,848 0 0 0.0
2021 Q1 4,375 2 1 457.1
2020 Q4 4,736 0 0 0.0
2020 Q3 4,888 0 0 0.0
2020 Q2 6,755 0 0 0.0
2020 Q1 6,838 0 0 0.0
2019 Q4 5,654 0 0 0.0
2019 Q3 8,899 0 0 0.0
2019 Q2 6,567 3 1 456.8
2019 Q1 6,295 0 0 0.0
2018 Q4 5,693 4 2 702.6
2018 Q3 7,336 4 1 545.3
2018 Q2 5,650 0 0 0.0
2018 Q1 4,765 0 0 0.0
2017 Q4 4,507 3 1 665.6
2017 Q3 3,546 0 0 0.0
2017 Q2 3,490 2 0 573.1
2017 Q1 3,456 0 0 0.0
2016 Q4 3,912 3 2 766.9
2016 Q3 5,820 0 0 0.0
2016 Q2 6,590 3 1 455.2
2016 Q1 8,075 3 1 371.5
2015 Q4 7,582 0 0 0.0
2015 Q3 8,652 0 0 0.0
2015 Q2 6,992 2 1 286.0
2015 Q1 7,623 3 2 393.5
2014 Q4 7,605 0 0 0.0
2014 Q3 7,056 13 4 1842.4
2014 Q2 7,312 0 0 0.0
2014 Q1 6,496 3 2 461.8
2013 Q4 6,226 0 0 0.0
2013 Q3 6,429 1 0 155.5
2013 Q2 6,708 0 0 0.0
2013 Q1 6,258 4 3 639.2
2012 Q4 6,733 0 0 0.0
2012 Q3 5,568 2 0 359.2
2012 Q2 4,511 0 0 0.0
2012 Q1 3,821 0 0 0.0
2011 Q4 2,263 3 1 1325.7
2011 Q3 4,284 3 1 700.3
No fatalities recorded at this mine.

Reportable incidents

1 on file

2024 · 1 incident

April 30, 2024 TX · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Alleyton Resource Company, LLC. · Struck against stationary object

Employees were working on a bearing on a belt scale and noticed a fish had come up through the plant and one of the employees went over to move it. When EE picked the fish up, one of the barbs stabbed EE's hand and when EE went to throw it, the barb broke off and got stuck in EE's hand.