EE was riding on the cx2 scoop being operated by other ee was cleaning #1 entry when he backed op and swivled the scoop. His foot got caught in the operators side of the center section. Crushing his foot causing a possible break to the bones in his foot.
Stockton No. 2: 148 MSHA citations Coal
Stockton No. 2 has $18K in proposed MSHA penalties and $322 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Stockton No. 2.
- Fatalities
- 0
- Total incidents
- 20
- Years on record
- 2004–2005
- Latest incident
- Oct 2005
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Stockton No. 2 has $18K in proposed MSHA penalties and $322 outstanding across 0 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 6 · 100%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.MSHA sampling at Stockton No. 2 shows 89% of 132 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2005-12-30, 20 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- CONTINUOUS MINER OPERATOR66
- ROOF BOLTER (SINGLE HEAD)21
- SCOOP CAR OPERATOR11
Silica (quartz)
Last sampled: 2005-10-18, 20 years ago- CONTINUOUS MINER OPERATOR13
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2005-10-18, 20 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- ROOF BOLTER (SINGLE HEAD)5
- SHUTTLE CAR OPERATOR (STANDARD SIDE)4
- CONTINUOUS MINER OPERATOR3
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2005 | 94% | 68 |
| 2004 | 84% | 64 |
| Year | silica avg (%) | samples |
|---|---|---|
| 2005 | 4.7 | 6 |
| 2004 | 5.2 | 7 |
| Year | over PEL | samples |
|---|---|---|
| 2005 | 7% | 15 |
| 2004 | 40% | 5 |
Stockton No. 2 recorded 5.42 reportable injury cases per 100 full-time workers in 2005.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2005 * | 5.42 | 5.42 | 0.000 |
| 2004 * | 34.19 | 31.35 | 0.000 |
- Colony Bay Coal Company 2003 to 2004
- 3-D Management Services, Inc. 2004 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2006 | 9 | 34,639 |
| 2005 | 33 | 250,488 |
| 2004 | 32 | 352,297 |
Stockton No. 2 sits in Boone County, West Virginia, where the Census mining category is 10.1% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2006 Q2 | 0 | 0 | 0 | |
| 2006 Q1 | 8,961 | 0 | 0 | 0.0 |
| 2005 Q4 | 17,406 | 12 | 1 | 689.4 |
| 2005 Q3 | 16,510 | 28 | 10 | 1695.9 |
| 2005 Q2 | 19,188 | 24 | 3 | 1250.8 |
| 2005 Q1 | 20,735 | 15 | 4 | 723.4 |
| 2004 Q4 | 20,127 | 9 | 4 | 447.2 |
| 2004 Q3 | 19,736 | 8 | 3 | 405.4 |
Show 2 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2004 Q2 | 19,288 | 10 | 8 | 518.5 |
| 2004 Q1 | 11,035 | 19 | 8 | 1721.8 |
Reportable incidents
20 on file2005 · 3 incidents
WHILE INSTALLING STRAP WAITING FOR OTHER MAN TO SWING HIS BOOM, AS HE WAS HOLDING THE STRAP A PIECE OF SLICK SLATE FELL THROUGH OPENING IN HALO RING, HITTING EE ON THE RT. HAND. ROCK WAS 2'X 2' & 1 1/2"THICK. EE HAD A SMALL CUT & SWELLING ON LEFT SIDE OF HAND BEHIND THUMB.
Roof condition occurred in an area where several cracks were present. When a cut was taken out of the crosscut to the right it tied the cracks together in a triangle. The top started working in this area. A crib was built in the intersection. In time the laminated roof broke out around the crib.
2004 · 17 incidents
EE BENT DOWN TO PICK UP A CRIB BLOCK AND PULLED A MUSCLE IN LOWER BACK
EE was tramming the miner across the section. He had stopped to hook a pull rope on boom of miner, when he accidently pinned himself between boom of miner & rib.
While tramming the miner, ee was struck in top of the head by a piece of draw rock. Rock measured approx. 10'L by 12" thick.
EMPLOYEE WAS BOLTING TOP. THE WRENCH SLIPPED OFF THE DRILL STEEL STRIKING HIM ON THE HAND.
Employee was bolting top when a loose piece of coal struck him in the eye.
EE WAS BOLTING TOP, DRILL POT WAS STOPPED UP. EE BENT DOWN TO UNSTOP DRILL POT WITH A PIECE OF WIRE WHEN A PIECE OF ROCK STRUCK HIM ON THE SIDE OF THE HEAD, CUTTING HIS HEAD.
EMPLOYEE HAD FINISHED BOLTING #7 ENTRY ON MAINS. AFTER BOLTING FACE HE BACKED OUT OF FACE ABOUT 30' FOR THE BOLTMAN ON OFF-SIDE TO SPOT A BOLT. EMPLOYEE WALKED AROUND TO OFF-SIDE OF BOLTER TO HELP OFF-SIDE BOLTMAN WHEN A LOOSE PIECE OF ROCK FELL FROM A SURFACE CRACK, STRIKING HIM ON THE LEG.
EMPLOYEE STRAINED HIS BACK LIFTING ON GEARS AT #2 BELT HEAD.
EMPLOYEE CUT HIS LEG WHILE USING A UTILITY KNIFE.
Area was on a point, roomed on 50' x 50' centers several cracks present. area bolted with 4' fully grouted bolts on 4' carters with straps. a wedge shaped piece of sandstone 16' long x 14' wide x 7' thick fell out on miner. fall will not be cleaned up except to move miner. section will be moved 700' outby.
EE had been making a belt splice. After completing splice and putting up his tools, ee slipped on slick mine bottom catching himself with his hands, stoving his pointer finger on left hand.
Fall is 20' x 20' x 5' thick, bolted with 4' & 6' fully grouted resin & roof straps. Area was cracked up bad on development and upon completion of mining the area was breakered off. Developed May 10th, 04. Fall is 800' from active section near spad 152. All areas are breakered off. Fall will not be moved.
Fall is 8' wide, 65' long, 5' thick, bolted with 4' resin and roof straps. Area cracked in several places on development 5-20-04. Fall near spad 174. Fall is breakered off and will not be moved.
EMPLOYEE WAS PREPARING TO INSTALL A ROOF STRAP WHEN A PIECE OF ROOF 25"X 25"X 3"THICK, FELL OUT BETWEEN BOLTS, STRIKING HIM ON THE HEAD.
EE WAS SHOVELING AROUND STACKER TAIL ROLLER, WHEN A LOOSE PIECE OF ROCK BOUNCED OFF BELT STRIKING EE ON THE LEFT SIDE OF THE FACE AND FOREHEAD.
INTERSECTION IN #4 ENTRY L.O.B.- THE FALL STARTED ON OUTBY CORNER AND FELL FOR ABOUT 35' INBY TOWARDS FACE AND BROKE OFF. TOP WAS SOLID WHEN BOLTED ON 2-14-04. NO WATER. FALL SHOWS SIGNS "NOW" OF WATER AND CRACKS WHERE FALL OCCURRED.
EE WAS SETTING UP SURVEY EQUIPMENT WHEN SLATE FELL FROM THE ROOF OF THE MINE.