EMP WAS REPLACING REAR TIRE ON 988A CAT WHEEL LOADER. FENDER WAS HELD IN UPRIGHT POSITION WITH CAHIN COME A LONG. APPARENTLY CONE A LONG BROKE LETTING FENDER FALL AND FENDER STRIKING EMP ON TH E HEAD.
SULLIVAN QUARRY: 1 recorded fatality Metal/Non-Metal
SULLIVAN QUARRY has $4K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at SULLIVAN QUARRY.
- Fatalities
- 1
- Total incidents
- 9
- Years on record
- 1987–1997
- Latest incident
- Jun 1997
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.SULLIVAN QUARRY has $4K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| CENT20020026M | Settlement | Schroeder | 2002 | $2K → $2K |
- Sullivan Quarries Company 1950 to 1979
- Missouri Portable Stone Inc 1979 to 1985
- K R Wilson Contracting Inc 1985 to 1999
- Capital Quarries Company Inc 1999 to present
| Year | Employees |
|---|---|
| 2001 | 0 |
| 2000 | 3 |
SULLIVAN QUARRY sits in Crawford County, Missouri, where the Census mining category is 0.9% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2001 Q1 | 0 | 0 | 0 | |
| 2000 Q4 | 0 | 7 | 3 | |
| 2000 Q3 | 0 | 0 | 0 | |
| 2000 Q2 | 0 | 0 | 0 | |
| 2000 Q1 | 4,296 | 6 | 2 | 1396.6 |
Fatalities at this mine
1 recordedReportable incidents
8 on file (excluding fatalities above)1996 · 1 incident
COOL MORNING, HEAVY DEW. OPERATOR WAS CHECKING HYDRAULIC LEVEL ON LOADER,OPERATOR WAS PUTTING CAP BACK ON WITH BOTH HANDS WHEN HE LOST HIS FOOTING FALLING STRAIGHT BACK OFF THE LOADER LANDING ON HIS BACK.
1993 · 1 incident
GOT OUT OF LOADER TO UNHOOK DOOR OF LOADER AND FELL OFF TIRE AND LANDED ON SIDE AND HURT HIS KNEE. WEATHER CONTITIONS (RAINING).
1992 · 1 incident
REPLACING BOLT IN HOIST TRUCK RUNNING INJ TO LITTLE FINGER ON L HAND
1989 · 1 incident
EMPLOYEE OPENED FUSE BOX TO CHECK FUSES, WHEN FUSE BOX BLEW UP. BURN TO RIGHT ARM FROM WRIST TO ELBOW.
1988 · 3 incidents
GRINDING CLUTCH LEVER TO PUT NOTCH IN SO IT COULD BE WELDED. GRINDING DISK BROKE AS EMPLOYEE WAS COMING TO EDGE TO MATERIAL. DISK CAUGHT ON EDGE OF MATERIAL AND JERKED GRINDER FROM HAND, THEN DISK CAME BACK ON HAND LACARATION OF LEFT HAND AND THUMB GOT 1/4" GAP ON BACK OF LEFT THUMB ALL THE WAY TO BONE AND TOOK PIECE OF BONE. PIECES OF DISK STUCK IN NECK AND STOMACH.
MISSED RAMP AND STRUCK SCALE HOUSE. EMPLOYEE RAILED TO OBSERVE PROPER SPEED LIMIT.
THE EMPLOYEE WAS CHANGIN A HAMMER IN THE HAMMER MILL. THE HAMMER WEIGHT WAS APPROX. 100 POUNDS. THE HAMMER SLIPPED AND CUT THE END OFF OF EMPLOYEES SMALL FINGER ON HIS RIGHT HAND.
1987 · 1 incident
IT WAS A CLEAR3DAY MUD WAS CLOGGIN UP THE TAIL PULLEY EMPLOYEE WAS BETWEEN ROLL MILL FRAME AND BELT HE WAS GOING TO TRY AND CLEAN MUD FROM TAIL PULLEY EMPLOYEE WAS USING A LONG SCREW DRIVER TO SCRAPE OFF 4UD FROM PULLEY HE DOESNT KNOW WHAT HAPPENED ACCIDENT HAPPENED QUICKLY HE CAUGHT EITHER HIS JACKET SLEEVE OF THE SCREW DRIVER IN TAIL PULLEY HIS ARM WAS PULLED UNDER THE TAIL PU