Mining Incidents

TP CLAIMS 1 & 2 /ROSA BLANCA: 178 MSHA citations Metal/Non-Metal

Controlled by Mohawk Industries Inc
Van Horn, Hudspeth County, TX  ·  Active
MSHA Mine ID: 4100867

TP CLAIMS 1 & 2 /ROSA BLANCA has $111K in proposed MSHA penalties and $0 outstanding across 3 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at TP CLAIMS 1 & 2 /ROSA BLANCA.

Fatalities
0
Total incidents
46
Years on record
1985–2025
Latest incident
May 2025
Compliance record
MSHA citations since 2000
178
citations
45
significant & substantial
$111,042
proposed penalties
$100,458
paid to date
90% of proposed penalties paid to date, a $10,584 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
80
inspections on record
1,003
inspection hours
17.7
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
178 citations across 1,003 inspection hours.
Source: MSHA inspections data, updated weekly.

TP CLAIMS 1 & 2 /ROSA BLANCA has $111K in proposed MSHA penalties and $0 outstanding across 3 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$111K
proposed penalties
$100K
current assessed
$100K
paid to date
$0
outstanding
172 assessments are final orders; 3 contested dockets.
Of $47K in penalties contested before the Commission, $36K was upheld in final decisions.
As of the most recent assessment on 2026-06-03.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
25.3%
significant & substantial
9.0%
high negligence or reckless
25.3%
reasonably likely or greater
40.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 10.7% low, 80.3% moderate, 9.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
27 citations taken to the federal commission · 15% of citations on record
  • Settled 27 · 100%
77%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 13 decided S&S contests · industry: 79%
23%
Penalty reduction in decided contests
$47K proposed, $36K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2017-03-08.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2017-0235 Settlement Miller 2017 $29K → $23K
CENT 2016-0327 Settlement Miller 2016 $11K → $8K
CENT 2011-538M Settlement Lesnick 2011 $7K → $5K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2022-02-10, 4 years ago
0%
of limit-tested samples over the exposure limit
47
samples
20
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz18
  • Unlisted Particulate, respirable, <1% Qtz17
  • Respirable dust, <.1mg7
  • Nuisance dust, respirable, <1% Qtz3
Show the individual readings (47)
Date Contaminant Concentration Limit Conc / limit Occupation
2022-02-10 Quartz, respirable, >1% Qtz 0.63 Bulldozer Operator
2022-02-10 Nuisance dust, respirable, <1% Qtz 5.81 10 0.58 Truck Driver
2022-02-10 Nuisance dust, respirable, <1% Qtz 0.45 10 0.05 Front-end Loader Operator
2022-02-10 Nuisance dust, respirable, <1% Qtz 2.17 10 0.22 Truck Driver
2014-07-09 Unlisted Particulate, respirable, <1% Qtz 0.26 Truck Driver
2014-07-09 Respirable dust, <.1mg 0 Rotary Bucket Ex. Operator
2014-07-09 Unlisted Particulate, respirable, <1% Qtz 0.58 Truck Driver
2012-04-25 Unlisted Particulate, respirable, <1% Qtz 0.89 Front-end Loader Operator
2012-04-25 Unlisted Particulate, respirable, <1% Qtz 2.06 Truck Driver
2012-04-25 Quartz, respirable, >1% Qtz 1.22 2.5 0.49 Front-end Loader Operator
2012-04-25 Quartz, respirable, >1% Qtz 1.68 3.31 0.51 Truck Driver
2011-04-05 Unlisted Particulate, respirable, <1% Qtz 0.96 Front-end Loader Operator
2011-04-05 Quartz, respirable, >1% Qtz 2.29 2.62 0.87 Truck Driver
2011-04-05 Quartz, respirable, >1% Qtz 0.19 1.4 0.14 Drill Operator, Rotary
2011-04-05 Unlisted Particulate, respirable, <1% Qtz 0.24 Shovel Operator
2009-12-29 Respirable dust, <.1mg 0 Truck Driver
2009-12-29 Unlisted Particulate, respirable, <1% Qtz 0.2 Truck Driver
2009-12-29 Respirable dust, <.1mg 0 Truck Driver
2009-12-29 Respirable dust, <.1mg 0 Front-end Loader Operator
2008-09-10 Quartz, respirable, >1% Qtz 0.83 2.88 0.29 Crusher Oper/Worker
2008-09-10 Unlisted Particulate, respirable, <1% Qtz 0.34 Truck Driver
2008-02-27 Quartz, respirable, >1% Qtz 0.86 2.19 0.39 Truck Driver
2008-02-27 Quartz, respirable, >1% Qtz 0.52 2.44 0.21 Front-end Loader Operator
2008-02-27 Quartz, respirable, >1% Qtz 0.96 2.84 0.34 Truck Driver
2005-10-05 Quartz, respirable, >1% Qtz 1.18 3.08 0.38 Truck Driver
2005-10-05 Quartz, respirable, >1% Qtz 2.65 3.08 0.86 Truck Driver
2005-10-05 Quartz, respirable, >1% Qtz 1.16 2.79 0.42 Crusher Oper/Worker
2005-10-05 Unlisted Particulate, respirable, <1% Qtz 0.32 Truck Driver
2005-10-05 Unlisted Particulate, respirable, <1% Qtz 0.57 Front-end Loader Operator
2005-05-17 Quartz, respirable, >1% Qtz 1.13 3.24 0.35 Crusher Oper/Worker
2005-05-17 Unlisted Particulate, respirable, <1% Qtz 0.49 Front-end Loader Operator
2005-05-17 Unlisted Particulate, respirable, <1% Qtz 0.76 Truck Driver
2005-05-17 Quartz, respirable, >1% Qtz 0.59 2.89 0.20 Truck Driver
2005-05-17 Unlisted Particulate, respirable, <1% Qtz 0.21 Front-end Loader Operator
2003-11-19 Unlisted Particulate, total, <1% Qtz 5.51 Truck Driver
2003-11-19 Quartz, respirable, >1% Qtz 0.45 2.39 0.19 Front-end Loader Operator
2003-11-19 Quartz, respirable, >1% Qtz 1.74 2.11 0.82 Bulldozer Operator
2003-11-19 Unlisted Particulate, total, <1% Qtz 4.74 Truck Driver
2003-06-12 Unlisted Particulate, respirable, <1% Qtz 0.71 Front-end Loader Operator
2003-06-12 Unlisted Particulate, respirable, <1% Qtz 5.9 Truck Driver
2003-06-12 Quartz, respirable, >1% Qtz 3.16 3.32 0.95 Truck Driver
2003-06-12 Quartz, respirable, >1% Qtz 1.19 3.3 0.36 Front-end Loader Operator
2002-07-31 Unlisted Particulate, respirable, <1% Qtz 0.28 Front-end Loader Operator
2002-07-31 Unlisted Particulate, respirable, <1% Qtz 0.39 Truck Driver
2002-07-31 Respirable dust, <.1mg 0 Mechanic
2002-07-31 Respirable dust, <.1mg 0 Front-end Loader Operator
2002-07-31 Respirable dust, <.1mg 0 Truck Driver
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

TP CLAIMS 1 & 2 /ROSA BLANCA recorded 9.21 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
9.21
total case rate
9.21
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Texas, metal and nonmetal mining averaged 1.17 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 9.21 9.21 0.000
2024 * 0.00 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 8.69 8.69 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Texas Talc Company 1950 to 1990
  2. Dal-Minerals Company 1990 to 2000
  3. American Talc Company 2000 to 2017
  4. Dal-Tile Corporation 2017 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 11
2025 12
2024 12
2023 12
2022 13
2021 15
2020 13
2019 14
2018 15
2017 15
2016 14
2015 14
2014 14
2013 16
2012 16
2011 17
2010 16
2009 17
2008 18
2007 16
2006 15
2005 17
2004 17
2003 16
2002 16
2001 16
2000 15
Source: MSHA quarterly employment and production, updated weekly.

TP CLAIMS 1 & 2 /ROSA BLANCA sits in Hudspeth County, Texas, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Hudspeth County, Texas · Population 3,331
0.0%
Mining share of county employment
$39,336
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 4,077 5 0 1226.4
2026 Q1 5,356 4 1 746.8
2025 Q4 5,007 0 0 0.0
2025 Q3 6,255 1 0 159.9
2025 Q2 5,064 0 0 0.0
2025 Q1 5,385 5 1 928.5
2024 Q4 5,137 0 0 0.0
2024 Q3 6,192 4 1 646.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 5,347 0 0 0.0
2024 Q1 5,940 0 0 0.0
2023 Q4 5,125 3 0 585.4
2023 Q3 6,079 5 0 822.5
2023 Q2 5,078 0 0 0.0
2023 Q1 6,122 1 0 163.3
2022 Q4 5,363 0 0 0.0
2022 Q3 6,418 0 0 0.0
2022 Q2 5,782 4 0 691.8
2022 Q1 5,748 3 0 521.9
2021 Q4 6,249 0 0 0.0
2021 Q3 7,181 0 0 0.0
2021 Q2 5,826 4 1 686.6
2021 Q1 5,355 0 0 0.0
2020 Q4 5,387 0 0 0.0
2020 Q3 4,764 0 0 0.0
2020 Q2 5,506 1 1 181.6
2020 Q1 7,354 0 0 0.0
2019 Q4 6,849 2 2 292.0
2019 Q3 7,664 0 0 0.0
2019 Q2 8,383 3 0 357.9
2019 Q1 8,054 2 1 248.3
2018 Q4 7,541 0 0 0.0
2018 Q3 7,867 0 0 0.0
2018 Q2 8,808 6 0 681.2
2018 Q1 7,892 3 0 380.1
2017 Q4 7,003 0 0 0.0
2017 Q3 8,087 2 0 247.3
2017 Q2 7,847 0 0 0.0
2017 Q1 8,477 0 0 0.0
2016 Q4 8,004 8 4 999.5
2016 Q3 7,996 0 0 0.0
2016 Q2 7,536 0 0 0.0
2016 Q1 8,230 17 5 2065.6
2015 Q4 7,748 3 2 387.2
2015 Q3 8,374 2 0 238.8
2015 Q2 8,152 4 0 490.7
2015 Q1 7,733 3 2 387.9
2014 Q4 7,712 0 0 0.0
2014 Q3 7,172 2 1 278.9
2014 Q2 7,736 0 0 0.0
2014 Q1 8,378 1 0 119.4
2013 Q4 7,691 0 0 0.0
2013 Q3 7,665 3 3 391.4
2013 Q2 9,300 0 0 0.0
2013 Q1 9,921 0 0 0.0
2012 Q4 8,182 6 3 733.3
2012 Q3 7,932 0 0 0.0
2012 Q2 7,808 5 2 640.4
2012 Q1 7,664 4 0 521.9
2011 Q4 7,673 0 0 0.0
2011 Q3 7,758 0 0 0.0
2011 Q2 8,793 3 1 341.2
2011 Q1 8,684 0 0 0.0
2010 Q4 8,655 6 3 693.2
2010 Q3 7,761 0 0 0.0
2010 Q2 7,356 6 2 815.7
2010 Q1 7,149 1 1 139.9
2009 Q4 9,072 4 3 440.9
2009 Q3 8,244 3 1 363.9
2009 Q2 7,619 0 0 0.0
2009 Q1 6,625 6 0 905.7
2008 Q4 7,843 0 0 0.0
2008 Q3 6,933 3 0 432.7
2008 Q2 9,803 0 0 0.0
2008 Q1 8,102 1 0 123.4
2007 Q4 7,045 0 0 0.0
2007 Q3 7,984 0 0 0.0
2007 Q2 6,963 0 0 0.0
2007 Q1 7,549 0 0 0.0
2006 Q4 7,608 0 0 0.0
2006 Q3 6,474 0 0 0.0
2006 Q2 7,245 0 0 0.0
2006 Q1 8,272 0 0 0.0
2005 Q4 8,428 1 0 118.7
2005 Q3 8,368 0 0 0.0
2005 Q2 8,663 2 0 230.9
2005 Q1 8,504 0 0 0.0
2004 Q4 9,105 4 1 439.3
2004 Q3 9,028 0 0 0.0
2004 Q2 7,230 1 0 138.3
2004 Q1 7,339 0 0 0.0
2003 Q4 9,257 2 0 216.1
2003 Q3 9,041 0 0 0.0
2003 Q2 7,018 1 0 142.5
2003 Q1 7,369 0 0 0.0
2002 Q4 7,631 2 0 262.1
2002 Q3 8,492 6 1 706.5
2002 Q2 9,621 0 0 0.0
2002 Q1 7,894 0 0 0.0
2001 Q4 6,892 2 0 290.2
2001 Q3 7,074 0 0 0.0
2001 Q2 6,371 0 0 0.0
2001 Q1 6,607 0 0 0.0
2000 Q4 6,318 1 0 158.3
2000 Q3 6,657 0 0 0.0
2000 Q2 7,731 0 0 0.0
2000 Q1 7,703 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

46 on file

2025 · 2 incidents

May 7, 2025 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech POWERED HAULAGE
Dal-Tile Corporation · Caught in, under or between a moving and a stationary object

2 techs installing rollers with a forklift. Tech1-aligning the roller while communicating to move the forklift. Using forks on the roller and the alignment tool, 1 of the forks slipped out of the roller crushing tech 1's right hand between the fork and the alignment tool. The Tech2 quickly moved the fork and assisted the first tech.

May 7, 2025 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Dal-Tile Corporation · Caught in, under or between a moving and a stationary object

Contract mechanic got a hand injured while replacing the track rollers on a Caterpillar 385c excavator.

2022 · 2 incidents

October 17, 2022 TX · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer OTHER
Dal-Tile Corporation · (Not Elsewhere Classified)

Employee showed a threshold shift during annual audiometric testing.

October 17, 2022 TX · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer OTHER
Dal-Tile Corporation · (Not Elsewhere Classified)

Employee showed a threshold shift during annual audiometric testing.

2020 · 1 incident

February 21, 2020 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Dal-Tile Corporation · Over-exertion (Not Elsewhere Classified)

EE was taking a nut off a bolt on the left guard on Terex 11 with EE's left arm extended when something popped in EE's left shoulder. EE could not raise EE's left arm more than a few inches without pain. EE said the shoulder joint was tender to the touch.

2014 · 1 incident

May 16, 2014 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
American Talc Company · Caught in, under or between a moving and a stationary object

Employee cut his finger while working on loader 10. He was removing a cylinder pin. He got his finger pinched and a cut. He reported the injury. First Aid treatment was given. He refused the ER and went back to work. On May 20 the Mine Manager discussed his finger pain. Employee then went to the ER. X-ray was negative. Antibiotic was prescribed. Employee returned to work.

2002 · 1 incident

May 9, 2002 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
American Talc Company · Struck by... (Not Elsewhere Classified)

NEW BELTS WERE BEING INSTALLED ON ELECTRIC MOTOR AND GEAR REDUCTION BOX, ELECTRIC MOTOR WAS STARTED AND GEARS WERE NOT TURNING IN GEAR REDUCTION BOX.

1999 · 1 incident

August 25, 1999 TX · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Dal-Minerals Company · Over-exertion in lifting objects

WHILE AT THE CRUSHER HE LIFTED A ROCK FROM THE CRUSHER BELT AND TURNED TO PLACE THE ROCK IN THE SHOOT.

1997 · 1 incident

April 8, 1997 TX · Metal/Non-Metal coal strip operator HANDLING OF MATERIALS
Dal-Minerals Company · Struck by flying object

EE WAS CHECKING THE AIR IN HIS TRUCK TIRES. HE DEPRESSED THE VALVE STEM TO CLEANOUT THE DIRT BEFORE CHECKING THE PRESSURE. THE DIRT BLEW IN HISRIGHT EYE.

1996 · 1 incident

June 4, 1996 TX · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
Dal-Minerals Company · Struck by... (Not Elsewhere Classified)

EE WAS HELPING CHANGE BELTS ON THE CONVEYORS. HE WAS HOLDING A BOLT AND NUT IN PLACE FOR EE OTHER APPLIED THE AIR ON AND THE NUT TWISTED AND CUT EE FINGER.

1995 · 1 incident

July 19, 1995 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Dal-Minerals Company · Over-exertion in wielding or throwing objects

EMPLOYEE REPORTED ACCIDENT ON 9-24-95. HE WAS THROWING A ROCK AND PULLED AN ABDOMINAL MUSCLE. HE MISSED TIME FOR THE FIRST TIME ON 8-1-95. TO GOTO THE DR. FOR THE SECOND TIME, MISSED ON 8-3-95 , THEN A PARTIAL ON 8-8-95, THEN CONSECUTIVE DAYS ON 8-9,10,14-1995.

1994 · 3 incidents

September 22, 1994 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Dal-Minerals Company · Over-exertion in lifting objects

INJUED IS NTO SURE WHEN THE HERNIA OCCURRED. HE HAD NOTICED SOEM NCREASING PAIN IN HIS GROING AND REPORTED IT TO TH ESUPERVISOR ON 9-22-94. HE WAS SENT TO TOWN TO THE DR FOR CHECK UP AND RE TURNE DTO WORK. HE SAW A SPECIALIST ON MONDAY 9-28-94.

March 7, 1994 TX · Metal/Non-Metal superintendent HANDLING OF MATERIALS
Dal-Minerals Company · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS HELPING LOAD RADIATORS INTO A LOADER BUCKET. A SPECK OF METAL LODGED IN HIS RIGHT EYE.

February 21, 1994 TX · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator OTHER
Dal-Minerals Company · Over-exertion (Not Elsewhere Classified)

THIS EMPLOYEE DID NOT REPORT A WORK RELAED INJURY. HE STARTED MISSING TIME ON 2-14-94. HE FIRS SEEN A DR LOCALLY IN 12-93, BUT HAD BEEN SEEING A DR IN EL PASO REGUARDING BACK RPOBLEMS SINCE 1989.

1993 · 5 incidents

December 14, 1993 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Dal-Minerals Company · Over-exertion (Not Elsewhere Classified)

REOCCURRENCE OF AMENDED REPORT ON 3-8-94. EPLOYEE IS NOW STARTING TO LOSE TIME.

July 26, 1993 TX · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Dal-Minerals Company · Rubbed or abraded

EE TURNED ON THE AIR CONDITIONER IN FRONT-END LOADER AND THE AIR CONDITIONER BLEW OUT DUST THAT WAS IN THE VENTS. THE DUST GOT INTO HIS EYES ANDHE WAS RUBBING EYE.

June 2, 1993 TX · Metal/Non-Metal drill operator POWERED HAULAGE
Dal-Minerals Company · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE WAS HELPING TO INSTALL ELEC POLE CAUGHT HIS LITTLE FINGER BETWEEN POLE & LOADER BUCKET

May 20, 1993 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver MACHINERY
Dal-Minerals Company · Contact with hot objects or substances

HE WAS CUTTING REBAR OVERHEAD. THE REBAR FELL AND KNOCKED THE TORCH OUT OF HIS HAND. THE TORCH FELL AND BURNT HIS RIGHT EAR AND CHEEK.

April 21, 1993 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Dal-Minerals Company · Fall onto or against objects

INJURED WAS CARRYING A FILTER AND STUBBED LEFT FOOT ON METAL GRATE AND STUMBLED. HE FELL AGAINST A WASH TUB.

1992 · 2 incidents

November 23, 1992 TX · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Dal-Minerals Company · Struck against stationary object

EMPLOYEE WAS STANDING NEXT TO LOADER EMPLOYEE HAD HIS RT HAND RESTING ON LOADER BUCKET EMPLOYEE WAS GOING TO SIGNAL TO OTHER EMPLOYEES & WHEN HE MOVED HIS RT HAND HE CUT IT ON A JAGGED EDGE OF METAL ON THE FRON T END LOADER BUCKET

June 15, 1992 TX · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Dal-Minerals Company · Struck against a moving object

LOADING OVERBURDEN BUCKET HIT ROCK SEAT LOOSE FLIPED UP AND FORWARD HIT STEERING WHEEL ABOUT EVEN WITH NAVEL

1991 · 2 incidents

December 10, 1991 TX · Metal/Non-Metal welder (shop) MACHINERY
Dal-Minerals Company · Fall from machine

WELDER CUTTING LOOSE LINERS ON DOZER.THE LINER SPRUNG LOOSE AND HIT WELDER AND KNOCKED HIM OFF LADDER.WELDER FELL BACK AND HIT HEAD ON BACK OF TRUCK.

April 8, 1991 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman STEPPING OR KNEELING ON OBJECT
Dal-Minerals Company · Struck against stationary object

INJURED WAS HELPING SEVERAL OTHER EMPLOYEES COVER A PILE OF DIRT WITH PLASTIC.HE STEPPED ON A ROCK AND TWISTED RIGHT ANKLE.

1990 · 2 incidents

February 26, 1990 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Dal-Minerals Company · Struck by flying object

I.NAME DROPPING CONNECTIONS ON DRILL RIG.PIPE STEM BOUND UP WHICH CAUSED IT TO BOUNCE & HIT I.NAME IN RIB CAGE.

February 6, 1990 TX · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer DUST DISEASE OF LUNGS
Dal-Minerals Company · Inhalation of radiations, caustics, toxic and noxious substances

DIAGNOSED-TALCOSIS.

1989 · 8 incidents

November 7, 1989 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver OTHER
Texas Talc Company · Over-exertion (Not Elsewhere Classified)

T HIS IS A REOCCURANCE OF AN ACCIDENT THAT HAPPENED IN JAN 1989 I NAME RETURNED TO WORK & WORKED35 ACTUAL WORK DAYS ON NOV 7TH HE HAD BACK PROBLEMS & HAD TO RETURN TO THE DOC I NAME HAS NOT RE TURNED

August 29, 1989 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
Texas Talc Company · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE WAS THREADING A BIT ON A CP DRILL RIG WHEN THE PIPE CAME DOWN & MASHED HIS MIDDLE FINGER ON LEFT HAND BETWEEN BIT & COLLAR ABOUT HALF THE FINGER ON THE PALM SIDE WAS CUT OFF

July 20, 1989 TX · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Texas Talc Company · Fall to lower level, (Not Elsewhere Classified)

I NAME WAS STANDING ON RAILS AT CRUSHER. HE TURNED TO QUICKLY WHEN SOMEONE CALLED TO HIM, HE LOST HIS BALANCE AND FELL. HE HURT RIGHT SKIN AND HURT RIGHT KNEE.

May 11, 1989 TX · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
Texas Talc Company · Struck against a moving object

I.NAME WAS OPERATING A D9 DOZER IN AN AREA WITH SEVERAL LARGE ROCKS. THE DOZER TEETERED OVER A ROCK AND JARRED I.NAME. HE DID NOT START LOSING TIME UNTIL MAY 18TH WHEN HE FELT HE SHOULD SEE A DOCTOR. DOCTOR DIAGNOSIS WAS STRAINED MUSCLES.

February 24, 1989 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Texas Talc Company · Fall from machine

THE INJURED WAS REMOVING A BARREL FROM THE BACKLON A PICKUP .HE WAS SITTING ON THE EDGE AND WAS PULLING THE BARREL TOWARDS HIMSELF,HIS FINGERS SLIPPED OFF THE BARREL AND HE FELL BACKWARDS OUT OF THE PICKUP.HE HIT THE GROUND WITH HIS SHOULDERS AND THE BACK OF HIS HEAD.HE DID NOT START LOSING TIME UNTIL 02-28-89.

January 25, 1989 TX · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Texas Talc Company · Over-exertion (Not Elsewhere Classified)

HIS FOOT SLIPPED OFF THE STEP ON LOADER HE FELL BUT MANAGED TO CATCH HIMSEL THE STRAIN AND TWISTING MOTION PULLED THE STOMACH MUSCLES WHICH WAS LATTER DIAGNOSED AS A HERNIA THIS EMPL DID NOT S TART OSING TIME UNTIL 2-10-89 WHEN WHEN HE WENT INTO THE HOPITAL FOR SURGERY

January 16, 1989 TX · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Texas Talc Company · Over-exertion in lifting objects

EMPL WAS PICKING ROCK AND STRAINED HIS BACK THISCONDITION IS A RECURRENCE OF PREVIOUS UNREPOTABLE ACCIDENT THE EMP RECEIVED FIRST AID ONLY AND XRAYS WERE NEGATIVE ON FIRST OCCURRANCE

January 10, 1989 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver OTHER
Texas Talc Company · Unclassified, insufficient data

I NAME EMPLOYED BY TEXAS TALC COMPLAINED OF NUBNESS IN HIS LEGS ON 1-10-89 I NAME WENT TO A DR ON 1-12-89 BECAUSE THENUMBNESS PERSISTED AND THERE WAS GRADULE INCREASE OF PAIN IN HIS LEGS THE EMPL DID NOT RETURN TO WORK THE DR STATED THAT I NAME HAS A DAMAGED DISK IN HIS LOWER BACK THERE WAS NO ACCIDENT OR INCIDENT TO DETERMINE WHEN THIS CONDITION HAPPENED OR WHAT MIGHT HAVE CAUSED

1988 · 7 incidents

September 13, 1988 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Texas Talc Company · Fall from machine

EMP WS PUTTING OIL IN DOZR WITH 5 GAL BUCKET WHILE STANDING ON ARMO F THE DOZER. HE LOST BALANCE AND FELL. DIAGNOSIS IS LOWER BACK STRAIN.

May 12, 1988 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Texas Talc Company · Struck against a moving object

THE EUCLID TRUCK THE EMPLOYEE WAS DRIVING UPSHIFTED VIOLENTLY. THE EMPLOYEE CLAIMS TO HAVE PAIN IN LOWER ABDOMEN WHERE THE SEAT BELT TIGHTENED.

May 10, 1988 TX · Metal/Non-Metal driller, highwall operator, highwall drill operator MACHINERY
Texas Talc Company · Struck by... (Not Elsewhere Classified)

EMPLOYEE CLAIMS FOREIGN OBJECT ENTERED CHEST FROM DRILL HE WAS OPERATING NOTHING CAN BE FOUND ON DRILL BE MISSING OR METAL FLAKING OFF.

May 6, 1988 TX · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Texas Talc Company · Caught in, under or between a moving and a stationary object

3/4 INCH DRIVE WRENCH BROKE WHILE TIGHTENING BOLTS ON DOZER BLADE CAUSING PINCHING OF RIGHT THUMB BETWEEN SAME AND BLADE.

April 14, 1988 TX · Metal/Non-Metal drill helper MACHINERY
Texas Talc Company · Struck by flying object

EMPLOYEE WAS HELPING ON OFFICE EXPANSION AND WHILE DRILLING HOLES IN STEEL TO BOLT BOARDS TO FOT GOT STEEL IN EYE AS REPORTED BY HIM BY PHONE ON 4-15-88 EMPLOYEE WAS NOT WEARING SAFETY GOGGLES

March 28, 1988 TX · Metal/Non-Metal mine manager, mine foreman, mine owner HANDLING OF MATERIALS
Texas Talc Company · Fall onto or against objects

EMPLOYEE WAS WORKING ON OFFICE EXPANSION AND WAS STANDING ONE FOOT ON STEP LADDER AND ONE FOOT ON DRAFTING TABLE AND COLLAPSEABLE TOP CAME DOWN DROPPING EMPLOYEE-BACK FIRST-ACROSS EDGE OF TABL E.BACK WAS SKINNED AND BRUISED BADLY.

February 12, 1988 TX · Metal/Non-Metal HANDLING OF MATERIALS
Texas Talc Company · Struck by flying object

MAN THROWING ROCK FROM TALE DID NOT LOOK WHERE HE WAS TGHROWING & HIT I.NAME WHO WAS ALSO PICKING ROCK ON LEFT SIDE OF HEAD NEAR EYE CAUSING A CUT TO SAME WITH SWELLING & BLACK & BLUE BRUISE

1987 · 4 incidents

October 31, 1987 TX · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Texas Talc Company · Struck by... (Not Elsewhere Classified)

MAN WAS LIFTING3SPRING ONTO TRUCK IT SLIPPED CATCHING RING ON LEFT RING FINGER CUTTING SAME NO TIME LOST BUT IS GETTING TETNAS SHOT

October 30, 1987 TX · Metal/Non-Metal ledgeman/hand, quarry man DUST DISEASE OF LUNGS
Texas Talc Company · Inhalation of radiations, caustics, toxic and noxious substances

CALLED IN FRIDA2 MORNING SAYING HE HAD CHEST PAINS AND WENT TO DR. AND DR REPORT SAYS THIS MAN HAS EARLY TALCOSIS IN HIS LUNGS AND SHOULD NOT BE WORKING IN A DUSTY ATMOSPHERE

October 22, 1987 TX · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Texas Talc Company · Over-exertion in wielding or throwing objects

MAN WAS THROWIN1 ROCK OUT OF TALC AND TWISTED BACK ON RT SIDE HE DID NOT REPORT IT TO ME UNTIL 5:30 PM

July 13, 1987 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Texas Talc Company · Fall from machine

EMPLOYEE WAS DE8ENDING FROM TRUCK WITH LUNCH PAIL IN HAND -LOST BALANCE AND FELL FROM EUCLID ABOUT 4FEET TO GROUND LANDING FLAT ON HIS BACK.

1985 · 2 incidents

December 16, 1985 TX · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Texas Talc Company · Fall to the walkway or working surface

EMP WENT IN TO 7OOL ROOM TO GET A KEY TO HIS TRUCK. WHILE REACHING FOR THE KEY HE GOT OFF-BALANCCE AND SLIPPED AND FELL. HE DIDNT NOTIFY FOREMAN AT TIME OF ACCIDENT. 12-26-85 HE WENT TO DR FOR LEG PAINS. HE W9NT TO A DR ON APPROX 1-3-86 IN EL PASO, FOREMAN WAS NOTIFIED OF ACCIDENT ON 1-7-86

June 20, 1985 TX · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Texas Talc Company · Struck by... (Not Elsewhere Classified)

I NAME WAS HOLDING PUNCH FOR MACK MINEYARD TO HIT WITH SLEDGE HAMMER AND HAD ONE GLANCING BLOW THAT GRAZED FINGER.