Mohawk Industries Inc: 79 MSHA citations controller
MSHA controller ID: 0134125
Watch this controller
Email me when a new MSHA incident is filed at any mine Mohawk Industries Inc controls.
- Fatalities
- 0
- Total incidents
- 8
- Mines on record
- 2
- Years on record
- 2017–2025
Public-issuer link
MOHAWK INDUSTRIES INC (MHK) discloses mines under this controller in its SEC Dodd-Frank Section 1503 (EX-95) mine-safety filings.
Compliance record
MSHA citations since 2018
79
citations
12
significant & substantial
$28,256
proposed penalties
$28,256
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2017
46
inspections on record
508
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 508 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$28K
proposed penalties
$28K
current assessed
$28K
paid to date
$0
outstanding
73 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-06-03.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.15.2%
significant & substantial
3.8%
high negligence or reckless
15.2%
reasonably likely or greater
25.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 3.8% low, 92.4% moderate, 3.8% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2025
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.9.15
total case rate
9.15
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2025 * | 9.15 | 9.15 | 0.000 |
| 2024 * | 0.00 | 0.00 | 0.000 |
| 2023 * | 0.00 | 0.00 | 0.000 |
| 2022 * | 0.00 | 0.00 | 0.000 |
| 2021 * | 0.00 | 0.00 | 0.000 |
| 2020 * | 3.19 | 3.19 | 0.000 |
| 2019 * | 5.58 | 0.00 | 0.000 |
| 2018 * | 0.00 | 0.00 | 0.000 |
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2022-02-10, 4 years ago
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.0%
of limit-tested samples over the exposure limit
14
samples
4
limit-tested
Most sampled contaminants
- Unlisted Particulate, respirable, <1% Qtz9
- Nuisance dust, respirable, <1% Qtz3
- Quartz, respirable, >1% Qtz2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Top causes
- OTHER 2 non-fatal
- SLIP OR FALL OF PERSON 2 non-fatal
- HANDLING OF MATERIALS 1 non-fatal
- HANDTOOLS (NONPOWERED) 1 non-fatal
- MACHINERY 1 non-fatal
- POWERED HAULAGE 1 non-fatal
Incident timeline
2025
2
2022
2
2020
1
2019
2
2017
1
Operators under this controller
Mines on record
For insurers, brokers, and safety consultants
Where Mohawk Industries Inc stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.