Waukesha Lime & Stone Metal/Non-Metal

Employee was performing equipment setup on water tank. While walking to hook up a hose, EE slipped on limestone slurry and fell down. EE sought medical treatment and was DX with a right shoulder strain. On 11/18/24 we were notified that EE was referred to physical therapy. Reporting within 10 days.

Employee was performing maintenance on a crusher. EE was changing shoes. As it was being lowered, EE's finger got pinched between the shoe and the edge of the crusher. Employee sought medical treatment and was DX with a subungual hematoma. On 9/16/24 we were notified that the hematoma was drained. Reporting within 10 days.

Contractor employee was removing bolts for breaker and the load shifted, pinching EE's right index finger.

Employee was lifting screen to place in screen deck & felt pain in the shoulder. EE eventually sought medical treatment & has now been diagnosed with a tear. Surgery is scheduled for 9/20/2021. The employee continues to work.

Employee removed seatbelt to exit the broom and got tangled in the seatbelt. Employee grabbed the side handle and injured right shoulder. Employee first sought treatment on 7-14-2021. Employee had an MRI on 7-20-2021. We received the MRI report on 7-26-2021 which showed a partial tear.

An employee was repositioning a lime bag and strained EE's right shoulder. EE initially did not seek medical treatment. EE has now sought medical treatment and received a steroid injection and was referred to physical therapy.

EE was pushing a wheelbarrow of mud out of the surge pile tunnel to go dump it. In the process the EE stepped on a piece of dry mud which caused them to lose their footing and strain their back because they continued to hang onto the wheelbarrow. They sought treatment with a chiropractor.

On 7/18/17, EE was setting up a crane with the crew. While pulling the cable thru the block of the crane EE injured EE's shoulder. EE sought medical treatment & was diagnosed with a strain. EE recently went back to the MD & was diagnosed with a rotator cuff tear. EE has continued to work regular job. EE will be having surgery in Nov.

Employee was carrying a screen up to the screen box when ee strained left shoulder. Injury was initially treated with first aid measures. On August 31 ee saw an orthopedic MD & was given a cortisone injection as well as referred to physical therapy.

Employee was welding on 3/15/16 & hot slag fell down sleeve causing a burn. On 3/23/16, our employee notified us of this incident & sought medical treatment. EE was diagnosed with a burn & an infection.

Employee was grinding on a piece of metal flashing that was resting on the metal saw horses. One side of the flashing vibrated off of the saw horse causing the flashing to slide sideways off of the other saw horse. The flashing cut the employees finger as it was falling. The employee sought medical treatment and received stitches.

Employee was walking to personal vehicle at the end of shift & fell on ice in parking lot that had dislodged during work shift. Employee did not seek medical treatment immediately. Employee has now sought medical treatment with chiropractor.

Frost was coming out of haul road truck hit rough spot in road. Operator jammed right hand on steering wheel. Bone fracture above pinky finger on right hand.

Passing motorist intentionally drove thru locked quarry fence & vehicle got stuck. He walked to nearby top edge of high wall. Waukesha County Sheriff responded at 8:03 PM. 2 Sheriff Deputies tried to "talk him down," but he jumped at 8:24 PM landing 80 feet below on quarry floor. We were notified at approx. 10:35 PM & we reported the incident to MSHA at 10:45 PM CST.

Employee was loosening belt on roller for conveyor & had pain in right elbow & shoulder. He did not report incident until 1/3/14. He sought treatment on 1-26-14 & did consider care. He saw MD again on 2-19-14 & was given removable brace & referred to physical therapy. We did not receive these records until 3-6-14 - therefore we did not knew that was reportable until now.

While climbing down equipment, employee caught ring finger on framework. Ring finger was cut and employee received stitches.

Employee was crimping on electrical lug & the crimping slipped & pinched his right pinky finger, cutting it & fracturing it

Employee was taking track off drill & removing small roller. Roller slipped & pinched employee's right ring finger. Employee did not seek treatment until 11-8-12 & was diagnosed with an infection.

EE was changing screens and pinched left ring finger. He received stitches.

EE was blowing off equipment with air hose. He tried to move the air hose to his other hand and he lost control of it. The air hose struck his safety glasses, knocking them off and then hit his eye. He was given prescription eye drops.

Walking on jobsite slipped on snow and fell on left shoulder. He went to MD and was treated conservatisly-pain persisted. He has now been diagnosed with a torn rotator cuff. He continued to work, but may has surgery in the future.

Employee was shoveling and pushing wet limestone and felt pain in mid back. Went to md was diagnosed with a strain and given light duty restriction we did not have light duty work available with restriction.

Employee cut hand on stationary bag slide plate. He went to walk in clinic and received stitches.

Employee stepped up concrete step to obtain fuel log paperwork. When he stepped down off concrete step he rolled his ankle. Employee is currently not working.

Employee was using pipe wrench to loosen pipe and felt pull in lower back.

Hitting bearing off with hammer and 3 pieces of steel broke off and flew into arm and arm pit.

Employee complained of back pain & instally said it was not work related. Then on 6/12/07 He said this is work related and his back pain in caused by driving the guarry truck over the past year. *We are denying work relatedness of this claim*.

Loading 55 lbs cases of explosives onto truck, employee picked up his 3rd box and felt pull in back.

Employee was cleaning out the hopper and was sliding large frozen chunks of lime. He was bending and turning and felt a pull in his lower back.

Employee was getting out of vehicle & his back popped. He had just arrived at the job site-had not started working yet. We are still investigating whether this is work related.

Employee was grinding on a skid loader bucket that he was repairing. A piece of steel flew into his eyes.

Employee had rock stuck between tires of truck. He parked the truck and used an air chisel to get the rock out. The rock flew out and cut/hit his lip.

Employee was walking down conveyor catwalk and stumbled. When he reached for the handrail he missed and jammed the fingers on his left hand in the catwalk.

EE REPORTED PAIN IN HER HAND FROM DATA ENTRY AND SCALE OPERATIONS. INITIALLY HER CLAIM WAS DENIED AS NOT WORK-RELATED BUT FURTHER INVESTIGATION AND MEDICAL EVALUATION HAS LED TO THIS BEING COV ERED AS WORK-RELATED. SHE IS TO HAVE SURGERY ON FEB 2003. SHE HAS NOT LOST ANY TIME AS OF YET.

WELDING ON PLANT, WELDING ROD BECAME STUCK ON METAL. HIT ROD WITH HAND TO LOSOEN IT AND PUNCTURED HAND.

PULLING PUMP & HOSES @ THE WLS WATER STATION- STRAINED LOWER/LUMBAR BACK MUSCLES. CHIROPRACTICTREATMENT.

SHOVELING GRAVEL ONTO CONVEYOR BELT WHEN BACK GAVE OUT. EE HAD MULTIFUSION TO HIS BACK IN FEBRUARY AND WAS RELEASED W/NO RESTRICTIONS.

LIME BAG PLANT MOISTURE IN AIRLINE OF BAGGING MECHANISM, PULLED OF LINE TO LET MOUSTURE ESCAPE AND ATTEMPTED TO RE-ATTACH LINE CAUSING CAUSING BAG TO ENGAGE AND STRIKE OTHER HARD.

CUTTING STEEL, PIECE OF METAL DEBRIS BECAUSE OF EMBEDDED IN EYE. SAFETY GLASSES WERE ON AT THE TIME.

EE WAS WORKING UNDERNEATH A CONVEYOR AND A ROCK FELL OFF AND HIT HIM IN THE HEAD. HE WAS WEARING A HARD HAT.

APRON WAS LYING ON TRUCK'S CONVEYOR BELT-EE REACHED TO TAKE THE APRON OFF, AND DOWN TO TURN THE LIGHT ON. THE APRON GOT CAUGHT AND HIS HAND WAS PULLED INTO THE CONVEYOR.

EMPLOYEE WAS TRYING TO GET INTO ENGINE COMPARTMENT OF LARGE DRILL, PROPPED ENGINE DOOR OPEN, BARFELL, DOOR HIT EMPLOYEE ON LOWER BACK. HE WENT TO WAUKESHA MEMORIAL ER AND HAD A CAT SCAN, WAS RELEASED IMMEDIATELY. COMPLAINS OF LEG WEAKNESS.HAS POSSIBLE NERVE DAMAGE.

WAS STANDING NEAR QUARRY WALL LOADING SHOT, A 10 POUND ROCK FELL FROM WALL, HITTING EMPLOYEE ON HEAD. HE WAS WEARING A HARDHAT.

BENT OVER TP PICK UP A BOX OF STONE CHIPS, STRAINED LOWER BACK.

WAS GREASING A LOADER, STEPPED WRONG AND LEFT KNEE POPPED.

EE WAS PUTTING A PIN IN A LOADER BUCKET. ANOTHER EE WAS ASSISTING. THE OTHER EE WAS HAMMERING IN A PIN, WHEN A SHIP OFF THE PIN FLEW INTO EE'S LEFT INDEX FINGER. THREE STITCHES REQUIRED.

HE WAS LIFTING 60 LB BAGS OF LIME WHEN HE HYPEREXTENDED HIS RIGHT SHOULDER, CAUSING A STRAIN.

WAS FILLING UP A WHEELBARROW. WENT TO PICK UP THE WHEELBARROW AND SLICED RIGHT HAND ON A PIECE OF SHEET METAL. REQUIRED FIVE STITCHES. RETURNED TO WORK IMMEDIATELY.

WAS MOVING SOME BAGS ON CONVEYOR IN BAG PLANT. CUT HAND ON SHARP EDGE OF CONVEYOR.

EE HAS BEEN HAVING A SKIN REACTION TO THE CHEMICALS IN THE EXPLOSIVES HE USES FOR BLASTING. HE HAS BEEN BLASTING FOR AROUND 14 YRS AND HIS SKIN PROBLEMS STARTED UP THIS SPRING. HIS RIGHT WRIST HAS OPEN SORES & IS SWOLLEN & INFECTED. EE DID NOT REPORT THIS TO ANYONE UNTIL TODAY. HE SAW A DR YESTERDAY WHO PRESCRIBED CREME & ANTIBIOTICS AND WRAPPED HIS WRIST.

TRIED TO CATCH A 66 LB OF LIME AS IT CAME OFF THE CONVEYOR, STRAINED HIS BACK.

EE WAS TRYING TO UNJAM THE BAG FROM THE CONVEYOR: HIS GLOVE GOT CAUGHT BETWEEN THE HEAD PULLEY AND THE BELT. IT TORE THE SKINF OFF OF HIS RIGHTRING FINGER AND DISLOCATED THE RIGHT PINKY FINGE R. THE REST OF HIS RIGHT HAND HAS MINOR CUTS, SCRAPES AND SOME BLISTERING.

EE WAS MOVING A 105' STACKING CONVEYOR WITH 3 OTHER EES IN ORDER TO REPAIR IT. THE CONVEYOR WAS LOWERED FOR MOVING WHICH CAUSED THE BASE PLATE TO TILT BACK & IT BECAME STUCK. THE BACK OF THE C ONVEYOR WAS RAISED BY A LOADER SO THE PLATE COULD BE MOVED BACK INTO POSITION. EE USED HIS HAND TO PUSH THE PLATE, IT SWUNG BACK & CRUSHED HIS RIGHT THUMB. THE THUMB IS FRACTURED & LACERATED.

MAY REQUIRE SURGERY LATER. THE VALIDITY OF THIS CLAIM IS CURRENTLY UNDER INVESTIGATION. EE WAS CLEANING OUT A CHUTE WHEN A CLUMP OF DIRT FELL ONTO THE BACK OF HIS NECK ON SEPT 4, 1997. ON 9-19 -97 EE REPORTED INJURY TO CLAIMS OFFICE HE STATETHAT HE HAD GONE TO THE DR AND IT HAD BEEN DETERMINED THAT HE HAS A TORN ROTATOR CUFF, SUPPOSEDLY CAUSED BY THE DIRT HITTING HIM.

WHILE DRIVING TRUCK THROUGH QUARRY, OBJECT EMBEDDED IN EYE.

EE MISSED THE LAST STEP OF LADDER WHILE GETTING OFF A LOADER AND FELL ONTO HIS LEFT HIP AND AGGRAVATED A PREEXISTING BACK CONDITION.

WHILE LIFTING BAGS, PULLED BACK MUSCLES.

EE INJURED NECK & BACK WHILE STACKING BAGS. CONSTANT LIFTING & BENDING CAUSED SEVERE NECK AND BACK PAIN.

EMPLOYEE INJURED EYE WHILE DRILLING AND BLASTING.A FOREIGN OBJECT FLEW INTO LEFT EYE WHILE WORKING.

WHILE SHOVELING, EMPLOYEE STUBBED HAND ON THE SHOVEL AND INJURED HIS LEFT HAND AND UPPER BACK.

WHILE CLEANING OUT A CHUTE THE EMPLOYEE SLIPPED AND BUMPED HIS SHOULDER.

WHILE LIFTING UP 5 GALLON PAILS OF STONE AND DUMPING THEM, EE STRAINED HIS BACK.

EMPLOYEE WAS STARTING A BULLDOZER WHEN HE WENT TO GET OUT OF THE BULLDOZER, THE DOOR BLEW SHUT ON HIS HAND.

EMPLOYEE MADE A SHARP NECK TURN WHILE DRIVING A LOADER. IT IS NOW CAUSING A SHARP PAIN IN HIS NECK.

EE GOT AIRBORNE FOREIGN BODY IN EYE WHILE LOADING PIPES.

WHILE STACKING BAGS EE EXPERIENCED SHOULDER PAIN.

EE WAS TIGHTENING A BOLT WITH A RATCHET WRENCH, FINGER FOT PINCHED.

WHILE COMING OUT FROM THE DISCHARGE BELT THE DOOR WAS OPEN AND THE EE GOT HIS SLEEVE CAUGHT ON THE DOOR AND THE DOOR CAME DOWN ON HIS THUMB.

WHILE DRILLING A ROCK FELL ON EMPLOYEE HEAD

EMPLOYEE WAS CUTTING APART A HOPPER OFF OF A CONVEYOR. WHEN HE ATTEMPTED TO PULL APART THE STEEL HE HAD CUT, IT FELL OVER ON HIM, STRIKING HIS HAND.

EMPLOYEE SLIPPED WITH A PIPE WRENCH, HIT HIMSELFAND CAUSED NECK PAIN.

WHILE WORKIGN WITH IMPACT WRENCH ABOVE HI HEAD, SOCKET FELL OFF AND HIT EMPLOYEE IN THE FACE.

WHILE OPERATING GRADER, EMPLOYEE BURIED DRAINAGE PIPE CAUSING MACHINE TO STOP SUDDENLY. EMPLOYEE HIT HIS HEAD ON REAR VIEW MIRROR.

WHILE CLOSING THE LID DOOR ON THE CRUSHER, THE BAR ON THE DOOR POPPED UP HITTING THE CLAIMANT IN THE NOSE AND LIP.

WHILE GRINDING RUST AND DIRT OFF OF CUTTING EDGES, SOMETHING GOT INTO HIS EYE. EMPLOYEE WAS WEARING SAFETY GLASSES AND GOGGLES.

CLAIMANT FELL ON STEPS GETTING OUT OF HIS TRUCK

EMPLOYEE WAS FREEING A ROLELR ON A CONVEYOR AND HIS GLOVE GOT CAUGHT INJURING HIS HAND.

EMPLOYEE WAS LIFTING BATTERIES OUT OF A BATTERY BOX ON A PIECE OF EQUIPMENT.

WHILE WORKING, CLAIMANT GOT HIS HAND CAUGHT IN THE MACHINE. [BAGGER MACHINE]

EMPLOYEE PINCHED FINGER WHILE WORKING.

WHILE CLAIMANT WAS WALKING ALONG THE CATWALK, HE SLIPPED AND FELL APPROXIMATELY 10' TO THE GROUND.

WHILE CAIMANT WAS STEAM CLEANING EQUIPMENT, HE SLIPPED & FELL INJURING HIS ELBOW.

WHILE WORKING AROUND OTHERS THAT WERE WELDING CLAIMANT GOT GLASHBURNS TO EYES.

CLAIMANT WAS WELDING AND A PIECE OF FOREIGN BODY FLEW INTO HIS EYE.

AFTER EMPLOYEE FINISHED WELDING, HE PULLED OFF THE HELMET AND A PIECE OF SLAG POPPED OFF AND WENT INTO HIS EYE.

WHILE CLAIMENT WAS DISASSEMBLING TURBO, HIS MIDDLE FINGER ON THE RIGHT HAND WAS CUT IN THE FINS.

WHILE CLAIMANT WAS GREASING THE DRIVE SHAFT ON HIS LOADER, A ROCK FELL FROM THE LOADER AND STRUCK HIM IN HIS RIGHT EYE.

EMPLOYEE WAS CUTTING ELECTRICAL TAPE OFF OF A PUMP WHEN HE SLIPPED AND CUT HIS FINGER.

WHILE EMPLOYEE WAS CLEANING EQUIPMENT,FOREIGN BODY GOT INTO HIS EYE.

EMPLOYEE WAS WORKING UNDER A MACHINE AND FOREIGN BODY GOT INTO HIS EYE.

EMPLOYEE SLIPPED ON ROCK WHILE WORKING AROUND THE FEEDER.

54736YEE GOT A PIECE OF GLASS IN HIS EYE WHEN A ROCK BROKE THE WINDOW IN THE TRUCK HE WAS OEPRATING.

54736YEE WAS ATTEMPTING TO MOVE A ROCK THAT HAD ROLLED OFF A QUARRY TRUCK AND INTO A CONVEYOR.

WHILE EMPLOYEE WAS WORKING OUTSIDE ON A PIECE OF EQUIPMENT, WIND BLEW SOME DUST IN HIS EYE.

EMPLOYEE WAS CUTTING & GRINDING IN A CHUTE ON THE SCREENING TOWER WHILE WORKING IN A CONFINED AREA HE GOT A PIECE OF DIRT RUST IN HIS EYE HE WAS WEARING SAFETY GLASSES

TIGHTENING BOLTS ON BELL HOUSING IT SLIPPED OFF STRAINED ELBOW

EMPL WAS TIGHTENING SPEED REDUCER TAKEUP WITH A LARGE WRENCH.PULLED UP ON WRENCH STRAINED HIS BACK.

EMPLOYEE SLIPPED WHILE GRABBING TOOL BOX FROM TRUCK.

WHILE SHOVELING UNDER THE JAW CRUSHER EMPLOYEE STRAINED MUSCLES IN HIS NECK AND UPPER BACK.

CHANGING SCREENS EMP CUT HAND

EMPLOYEE WAS GETTING PARTS OUT OF A STEEL CABINET AND CAUGHT HIS FINGER CAUSING A LACERATION REQUIRING STITCHES.

IT WAS RAINING SO EMPLOYEE WAS GOING TO TARP HIS LOAD OF BAGGED LIME TO PROTECT IT FORM MOISTURE. WHEN HE THREW THE TAR UP ONT HE LOAD HE FELT PAIN IN HIS BACK.

EMPLOYEE WAS DRIVING STOCK PILE TRUCK DURING A LIGHT SNOW STORM. THE TRUCK LOST CONTROL ON THE SLIPPERY SNOW CAUSING DRIVER TO HIT FOREHEAD. SUTURES WERE NECESSARY TO CLOSE THE LACERATION.

EMPLOYEE WAS GRINDING THE WELD OFF UNDER A TRUCK BOX AND SOME OF THE GRINDING DEBRIS BOUNCED BACK AROUND HIS SAFETY GLASSES AND GOT IN HIS LEFT EYE.

EMPLOYEE WAS WORKING UNDER DIRTY EQUIPMENT AND GOT DIRT IN HIS EYES.

DISLODGING ROCK FROM JAW CRUSHER.STEEL WEDGES KICKED UP HITTING THE GUARD WHICH BROKE STRIKING EMPL ON THE LEG AND CUTTING HIM.

EMPLOYEE WAS TAKING TIRES OFF QUARRY TRUCK. HE PUT THE TIRE ALONG SIDE THE TRUCK AND WHEN IT ROLLED BACK IT CAUGHT HIS ARM BETWEEN TE LADDER OF THE TRUCK AND THE TIRE BRUISING HIS ARM.

EMPLOYEE WAS EXITING SHOP DOOR WHEN HE SAW A TUCK WHICH HAD LOST ITS BRAKE SYSTEM HEADING FOR HIM-HE JUMPED TO GET OUT OF THE WAY AND RECEIVED CONTUSIONS AND ABRASIONS TO LEFT HIP, LEG AND RIG HT ARM.

EMPLOYEE STRUCK HIS HEAD ON DRILL STEEL STICKING OUT OF A PICKUP TRUCK AND BROKE A TOOTH.

EMPLOEYE TRIED TO DISLODGE A ROCK FROM A CONVEYOR TAIL PULLEY BY REACHING IN WITH HIS HAND AND ATTEMPTING TO PULL IT OUT.

EMPLOYEE WAS CUTTING A PIECE OF RUBBER WITH A UTILITY KNIFE AND WHEN HE CAME TO THE END OF THE CUT THE KNIFE SLIPPED CUTTING HIS LEG REQUIRING STITCHES.

EMPLOYEE WAS IN VEHICLE WHICH LOST CONTROL AND WENT OVER A LEDGE. HE RECEIVED A LACERATION TO HS HEAD AND RIGHT LEG.

EMPLOYEE EWAS PRYING ON A GUARD TO BEND IT OUT WHENT HE PRY BAR SLIPPED AND HE FELL STRAIGHT DOWN ON HIS BACK ON THE FLOOR CAUSING BACK AND SHOULDERS TO BE SORE.

EMPLOYEE STEPPED ON A PIECE OF RUBBER BELTING WITH A NAIL IN IT CAUSING A PUNCTURE WOUND TO RT FOOT WHICH REQUIRED A TETANUS SHOT

EMPLOYEE WAS WELDING & A PIECE OF SLAG WENT INTO HIS EYE

WELDING BEING DONE IN CLOSE PROXIMITY TO WHERE EMPLOYEE WAS WORKING AND HE RECEIVED A WELDING FLASH TO EYE AND FOREIN OBJECT.

EMPLOYEE WAS WORKING INSIDE OF A CRUSHER CLEANING FROZEN MATERIAL AND RUST OFF OF METAL AND A CHIP STUCK HIM IN THE RIGHT EYE.

EMPLOYEE GOT A SMALL PIECE OF STEEL IN HIS RIGHT EYE.

EMPLOYEE WAS HELPING LINE UP A MOTOR AND GEAR BOX. WHEN IT WAS A FEW INCHES FROM THE FLOOR IT CAUGHT HIS FINGER.

CUTTING DOWN DEAD TREE & WHEN TREE FELL SMALL BRANCH BROKE OFF & HIT EMPLOYEE IN LEFT ELBOW

EMPL WAS TIGHTENING BOLTS ON MOTOR WHEN WRENCH SLIPPED & HIT LEFT ELBOW.

EMPLOYEE WAS DRILLING HOLES AND A ROCK FELL STRICKING HIM ON THE RIGHT FOOT.

WHILE CHANGING A BEARING ON A BELT PULLEY ONE GUY WAS HITTING THE OLD BEARING OFF WITH A HAMMER AND PUNCH WHEN A PIECE OF THE OLD BEARING BROKE OFF HITTING ANOTHER EMPLOYEE IN THE EYE.HE WAS S TANDING 10-12 FEET AWAY.

SHOVELED SOME STONE HURT HIS BACK

EMPLOYEE WAS HELPING CHANGE TIRE ON LARGE QUARRY TRUCK.THE TIRE FELL OFF BALANCE HITTING HIM IN THE BACK PINNING HIM BETWEEN THE IRE AND HUB ON THE QUARRY TRUCK.

EMPLOYEE WAS CLIMBING TO TOP OF SCREEN TOWER AND GOT A SMALL PIECE OF DIRT IN HIS EYE.

EMPLOYEE WAS GRINDING HOLES AND A PIECE OF GRINDING CHIP GOT INTO HIS EYE.

I-BEAM WAS PLACED ABOVE BREAKER BAR ON IMPACTOR AND A COME-A-LONG WAS HOOKED TO THE I-BEAM.WHOILE LOWERING BAR TO THE GROUND THE I-BEAM SLID CATCHING EMPLOYEE ON SIDE OF FACE.

EMPLOYEE WAS POUNDING ON A PIECE OF HARD STEEL WITH A STEEL HAMMER AND A PIECE OF STEEL CHIPPED OFF AND FLEW AND HIT HIM ON THE FOREHEAD.

A CAN OF SOLVENT TIPPED OVER AND SPILLED ON EMPLOYEES HEAD CAUSING IRRITATION TO EYES AND EARS.

EMPLOYEE WAS FUELING A PICE OF EQUIPMENT AND SLIPPED AND FELL.

WHILE HOLDING PARTS FOR MAN WELDING EMPLOYEE GOT FLASH BURNS TO BOTH EYES

EMPLOYEE WAS MAKING A ROUTINE VOLTAGE CHECK ON A REVERSING MAGNETIC STARTER WHICH WAS N OT WORKING BUT APPEARED TO BE OK. WHEN HE TOUCHED THE STARTER WITH THE TEST METER LEADS SOMETHING INSIDE SHORTED OUT CAUSING A WIRE TO BURN OFF AND CROSS PHASEING SHORTING OUT TO ANOTHER OF THE 3 PHASES WHICH STARTED A CHAIN REACTION CAUSING A VERY BRIGHT LIGHT WHICH BURNED HIS EYES.

EMPL WAS SHOVELING NEAR CRUSHER TURNED TO WALK TO TRAILER AND STRUCK HIS NONE ON CONVEYOR

EMPL GOING TO SHUT OFF PLANT AND HIT LEG ON FRONT OF CRUSHER.

OPERATOR WAS DRILLING FOR BLASTINE WHEN A DRILL STEEL SLIPPED OUT OF THE RACK FALLING ON HIS RIGHT FOOT BEHIND STEEL TOED SHOES.

EMPLOYEE WAS ADJUSTING THE TRACK CYLINDER WHEN A GREASE FITTING UNDER PRESSURE CAME LOOSE AND HIT HIM ON THE FOREHEAD.

EMPLOYEE WAS WORKING IN SCREEN AND DIRT FELL ON HIM AND INTO HIS LEFT EYE.

EMPLOYEE WAS WELDING ON SCREEN AND PUSHED HIMSELF TO A BETTER POSITION CAUSING HIS FOOT TO SLIP.

EMPLOYEE WAS REMOVING OIL FILTER ON COMPRESSOR WHEN HIS HAND SLIPPED AND HE CUT HIS FINGER ON THE FILTER

EMPLOYEE WAS CHANGING SCREENS IN THE WEST CRUSHING PLANT AND SMASHED THE UPPER KNUCKLE OF HIS INDEX FINGER-LEFT AHND.

EMPLOYEE WAS WA5KING TO HIS PIECE OF EQUIPMENT TO GO TO WORK AND SLIPPED ON THE ICE AND FELL.

EMPLOYEE WAS TR2ING TO PUT OUT FIRE OF ANOTHER EMPLOYEES CLOTHING

EMPLOYEE WAS CU7TING WITH A TORCH & HIS CLOTH GOVES STARTED TO BURN

EMPLOYEE WAS GO3NG TO CRAWL INTO CHUTES TO CLEAN OUT FOR THE FOLLOWING DAY HE STPPED THROUGH THE DOOR ONTO THE CHUTE & SLIPPED & STARTED TO FALL HE GRABBED FOR DOOR HITTING HIS ELBOW ON SIDE O F DOOR 3

EMP WAS PUTTING3BELT DRESSING ON BELT WHE HIS SLEEVE GOT CAUGHT