Mining Incidents

WEST FORK QUARRY & PLANT: 28 MSHA citations Metal/Non-Metal

APAC-Central Inc. · Surface
Controlled by CRH PLC
Fayettefville, Washington County, AR  ·  Abandoned
MSHA Mine ID: 0300039

WEST FORK QUARRY & PLANT has $5K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at WEST FORK QUARRY & PLANT.

Fatalities
0
Total incidents
28
Years on record
1983–1997
Latest incident
Jun 1997
Compliance record
MSHA citations since 2000
28
citations
7
significant & substantial
$5,059
proposed penalties
$5,059
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
8
inspections on record
80
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 80 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

WEST FORK QUARRY & PLANT has $5K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$5K
proposed penalties
$5K
current assessed
$5K
paid to date
$0
outstanding
28 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2003-04-28.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
25.0%
significant & substantial
0.0%
high negligence or reckless
25.0%
reasonably likely or greater
89.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 28.6% low, 71.4% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

WEST FORK QUARRY & PLANT recorded 0.00 reportable injury cases per 100 full-time workers in 2001.

Injury rate, 2001
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 4.48 and the all-US-mining average was 5.26 cases per 100 workers.
In Arkansas, metal and nonmetal mining averaged 4.22 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2001 * 0.00 0.00 0.000
2000 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. APAC-Central Inc. 1950 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2004 2
2003 6
2002 10
2001 21
2000 29
Source: MSHA quarterly employment and production, updated weekly.

WEST FORK QUARRY & PLANT sits in Washington County, Arkansas, where the Census mining category is 0.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Washington County, Arkansas · Population 251,863
0.2%
Mining share of county employment
$66,426
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2004 Q1 409 0 0 0.0
2003 Q4 889 0 0 0.0
2003 Q3 769 0 0 0.0
2003 Q2 2,050 1 0 487.8
2003 Q1 2,545 0 0 0.0
2002 Q4 1,298 0 0 0.0
2002 Q3 1,482 0 0 0.0
2002 Q2 2,742 0 0 0.0
Show 9 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2002 Q1 403 0 0 0.0
2001 Q4 1,407 0 0 0.0
2001 Q3 7,668 0 0 0.0
2001 Q2 8,993 0 0 0.0
2001 Q1 6,196 2 0 322.8
2000 Q4 11,877 0 0 0.0
2000 Q3 12,741 0 0 0.0
2000 Q2 13,895 0 0 0.0
2000 Q1 9,401 25 7 2659.3
No fatalities recorded at this mine.

Reportable incidents

28 on file

1997 · 2 incidents

June 20, 1997 AR · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
APAC-Central Inc. · Struck by falling object

EE WAS HELPING CHANGE OUT V-BELT ON VSI. WHILE REMOVING LAST BOLT ON COVER, WHEN IT FELL OFF STRIKING HIM ON SHIN. HE DID NOT WANT TO THE DR. 6-20. HE WENT TO THE CLINIC 7-25.

March 28, 1997 AR · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
APAC-Central Inc. · Struck by... (Not Elsewhere Classified)

EMP WAS WORKING WITH ANOTHER EMP TAKING BOLTS OUT OF CRUSHING UNIT. OTHER EMPS WRENCH SLIPPED OFF BOLT AND HIS FOREARM STRUCK EMP IN MOUTH. EMP DID NOT WASN TO SEE DR 3-28-97. CAME BY OFFICE 4 -11-97 WANTING TO SEE DENTIST. EMP NEEDS BRIDGE WORK REPLACED.

1996 · 4 incidents

August 28, 1996 AR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
APAC-Central Inc. · Struck by... (Not Elsewhere Classified)

EE WAS REMOVING A BROKEN HEADLIGHT FROM LOADER WHEN A PIECE OF GLASS BROKE LOOSE & LODGED IN HIS LEG.

August 8, 1996 AR · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
APAC-Central Inc. · Caught in, under or between (Not Elsewhere Classified)

EE LIFTED TWO WHEEL DOLLY OFF THE BACK OF PICKUP, IT SLIPPED & CAUGHT HIS RIGHT LITTLE FINGER BETWEEN CROSS BAR & TAILGATE.

August 2, 1996 AR · Metal/Non-Metal welder (shop) STEPPING OR KNEELING ON OBJECT
APAC-Central Inc. · Struck against stationary object

EE & ANOTHER EE WERE MOVING A LARGE STEEL PLATE INTO PLACE TO WELD, HE STEPPED ON WELDING ROD ON FLOOR & SLIPPED STRAINING HIS BACK.

June 5, 1996 AR · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler HANDLING OF MATERIALS
APAC-Central Inc. · Over-exertion in lifting objects

EE WAS POURING 5 GALLONS OF WATER INTO WATER PUMP TO PRIME IT, WHEN HE CLAIMS HE STRAINED HIS BACK. REPORTED TO SUPERVISOR 6-5-96, DID NOT WANT TO SEE DR AT THAT TIME. WENT TO DR 6-12-96.

1994 · 1 incident

October 11, 1994 AR · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
APAC-Central Inc. · Fall from machine

EE SWABBED BELT DRESSING ON HEAD PULLEY OF CONVEYOR WHILE IT WAS RUNNING, HE FELL ON EDGE OF CONVEYOR BELT DISCHARGING HIM WITH MATERIAL LANDING 27' BELOW.

1993 · 2 incidents

October 18, 1993 AR · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver MACHINERY
APAC-Central Inc. · Contact with hot objects or substances

WHILE USING CUTTING TORCH OVERHEAD ON STORAGE BIN HOT SLAG POPPED OFF & LODGED IN RIGHT EAR CANAL.

August 18, 1993 AR · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman DISORDERS (PHYSICAL AGENTS)
APAC-Central Inc. · Contact with heat

EE PASSED OUT IN SEAT OF EUC TRUCK WHEN IT WAS PARKED UNDER MATERIAL BIN BEING LOADED TEMP 102 F.

1992 · 3 incidents

September 28, 1992 AR · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
APAC-Central Inc. · Struck against stationary object

BATCHET COME ALONG SLIPPED A TOOTH WHILE OPENING HAMMERMILL AND EE S HAND SLIPPED OFF HANDLE AND RIGHT FOREARM HIT CHUTE TO HAMMERMILL.

July 29, 1992 AR · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
APAC-Central Inc. · Struck against a moving object

55020EUCLID DUMP TRUCK WAS BACKED INTO BY A 988 CAT LOADER. REAR LOADER WHEEL HIT RIGHT FRONT WHEEL OF EUCLID AND JEREKED STEERING WHEEL BREAKING HIS LEFT THUMB.

May 27, 1992 AR · Metal/Non-Metal welder (shop) MACHINERY
APAC-Central Inc. · Struck by flying object

INJURED WAS USING HAND GRINDER AND A PIECE OF METAL LODGED IN HIS EYE. DID NOT REPORT IT TO SUPERVISOR UNTIL 5-29-92.

1990 · 2 incidents

June 29, 1990 AR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
APAC-Central Inc. · Struck by... (Not Elsewhere Classified)

WHILE REMOVING BROKEN CARRIER BEARING/BEARING CAGE SLIPPED ACROSS FOREARM.

January 8, 1990 AR · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
APAC-Central Inc. · Over-exertion in pulling or pushing objects

PULLING TRIP ROPE UNDER BIN BY HAND AND STRAINED LOWER BACK.

1989 · 2 incidents

November 28, 1989 AR · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
APAC-Central Inc. · Struck by falling object

WHILE HAMMERMILL LID WAS BEING HOISTED,THE LID SUPPORT BAR SLIPPED ALLOWING LID TO FALL BEYOND USUAL TRAVEL DISTANCE.

March 31, 1989 AR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
APAC-Central Inc. · Struck against stationary object

WHILE CUTTING PVC PIPE-EMPLOYEE SLID HIS HAND OVER A PLASTIC SLIVER, RESULTING IN A 7-SUTURE LACERATION TO HIS RIGHT INDEX FINGER.

1988 · 4 incidents

August 4, 1988 AR · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey HANDLING OF MATERIALS
APAC-Central Inc. · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE WAS TRYING TO PRY APART TWO PIECES OF METAL & THE LITTLE FINGER OF HIS RT.HAND GOT CAUGHT BETWEEN THE TWO PIECES OF METAL & GOT SMASHED

July 7, 1988 AR · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
APAC-Central Inc. · Over-exertion in lifting objects

EMPLOYEE WAS LIFTING SHAKER SCREENS FROM LOADER BUCKET AND SPRAINED HIS LEFT ELBOW

May 27, 1988 AR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
APAC-Central Inc. · Struck against a moving object

EMPLOYEE WAS OPERATING CRANE & MOVING A LOAD OF FLAT METAL LOAD SHIFTED & TURNED THE CRANE OVER EMPLOYEE DID NOT HAVE REAR OUTRIGGER DOWN

May 24, 1988 AR · Metal/Non-Metal weighman, scale person HANDTOOLS (NONPOWERED)
APAC-Central Inc. · Over-exertion (Not Elsewhere Classified)

EMPLOYEE WAS USING PRY BAR TO TURN CLEANOUT PULLEY TO REMOVE ROCKS FROM SAME WITH WRISTS HELD STRAIGHT GRADUALLY INCREASING PRESSURE WAS APPLIED SUDDEN SHARP PAIN OCCURRED IN WRIST

1987 · 5 incidents

August 3, 1987 AR · Metal/Non-Metal HANDLING OF MATERIALS
APAC-Central Inc. · Over-exertion in lifting objects

EMPLOYEE PICKED UP SPEED-REDUCER THAT WAS LAYING ON CROSS BRACING, PLACED ON SHAFT, AND BACK STARTED TO BURN AND BECAME STIFF.

April 22, 1987 AR · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver MACHINERY
APAC-Central Inc. · Struck by falling object

EMPLOYEE WAS SHOVELING EXCESS MATERIAL AND A LARGE ROCK FELL FROM SCREEN STRIKING EMPLOYEE ON RIGHT SIDE OF HARD HAT AND RIGHT SHOULDER, THEN STRUCK RIGHT STEEL TOED BOOT. EMPLOYEE LOST CONSCI OUSNESS FOR ABOUT A MINUTE.

April 12, 1987 AR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
APAC-Central Inc. · Struck against stationary object

EMPLOYEE WAS RE4OVING BOLT FROM UNDER AUTOMOBILE WITH WRENCH WHEN THE WRENCH SLIPPED OFF BOLT CAUGHT EMPLOYEE TO STRIKE CROSSMEMBER OF TRUCK FRAME WITH RIGHT HAND CAUSING LACERATION.

March 16, 1987 AR · Metal/Non-Metal SLIP OR FALL OF PERSON
APAC-Central Inc. · Contact with hot objects or substances

EMPLOYEE WAS REMOVING BOLTS WITH TORCH, LOST HIS BALANCE AND PASSED LEFT HAND UNDER TORCH.

February 11, 1987 AR · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey SLIP OR FALL OF PERSON
APAC-Central Inc. · Fall to the walkway or working surface

EMPLOYEE WAS WALKING ACROSS SHOT, WHEN HE SLIPPED ON A PIECE OF SHALE AND TWISTED HIS RIGHT ANKLE. RX-DARVOCET.

1986 · 1 incident

January 9, 1986 AR · Metal/Non-Metal rock driller MACHINERY
APAC-Central Inc. · Struck by... (Not Elsewhere Classified)

EMPL BREAKING S7EEL LEAVING DRILL IN ROTATION WIHILE UNLOCKING STEEL GUIDE.DRILL STEEL COLLAR BROKE LOOSE FROM DRIFTER STRIKING EMPL ON BACK OF HEAD BELOW HARD HAT.

1985 · 1 incident

September 5, 1985 AR · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
APAC-Central Inc. · Struck by... (Not Elsewhere Classified)

MINER HAD BEEN TALKING TO TRACTOR OPERATOR TRACTOR OPERATOR MADE HARD TURN TO RIGHT UPON PULLING AWAY FROM MINER WHO WAS STANDING ON GROUND BOX BLADE EXTENSION ON TRACTOR STRUCK MINER ON THIGH OF LEFT LEG MINER WAS CHECKED BY MEDICAL PERSONNEL & HE RECEIVED SEVERE BRUISES ON LEFT THIGH

1983 · 1 incident

August 22, 1983 AR · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
APAC-Central Inc. · Struck by... (Not Elsewhere Classified)

CHECKING WATER IN RADIATOR OF R-50 ROCK TRUCK, USING 18" BAR TO REMOVE CAP--BAR SLIPPED HITTING HAND.,