Mining Incidents

Active Resources, Inc.: 244 MSHA citations operator

Controlled by Jon Nix
MSHA operator ID: 0179133

Watch this operator

Email me when a new MSHA incident is filed at any Active Resources, Inc. mine.

Fatalities
0
Total incidents
6
Mines on record
3
Years on record
2022–2026
Compliance record
MSHA citations since 2022
244
citations
48
significant & substantial
$51,709
proposed penalties
$38,249
paid to date
74% of proposed penalties paid to date, a $13,460 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2021
75
inspections on record
2,079
inspection hours
11.7
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
244 citations across 2,079 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$52K
proposed penalties
$52K
current assessed
$38K
paid to date
$13K
outstanding
202 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-06-24.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
20.1%
significant & substantial
10.9%
high negligence or reckless
20.1%
reasonably likely or greater
28.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 39.3% low, 49.8% moderate, 10.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.19 and the all-US-mining average was 1.97 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2026 * 8.63 8.63 0.000
2025 * 0.00 0.00 0.000
2024 * 4.50 2.25 0.000
2023 * 3.85 3.85 0.000
2022 * 5.05 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2026-08-12
98%
within 1.5 mg/m3
108
samples
2.79
dust max (mg/m3)
2
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
59 samples taken by MSHA inspectors, 49 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR41
  • UTILITY MAN26
  • CLEANING PLANT OPERATOR21

Silica (quartz)

Last sampled: 2025-08-04
0.6
silica avg (%)
13
samples
1.4
silica max (%)
Most-sampled occupations
  • CLEANING PLANT OPERATOR7
  • UTILITY MAN6

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2025-01-27
0%
over PEL
23
samples
Most-sampled occupations
  • BULLDOZER OPERATOR7
  • HIGHLIFT OPERATOR/FRONT END LOADER5
  • UTILITY MAN5
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Top causes

Incident timeline

2026
2
2024
2
2023
1
2022
1

Mines on record

For insurers, brokers, and safety consultants

Where Active Resources, Inc. stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us