Mining Incidents

American Mining & Manufacturing Corp: 1 recorded fatality operator

Controlled by Timothy P Smith
MSHA operator ID: P24548

Watch this operator

Email me when a new MSHA incident is filed at any American Mining & Manufacturing Corp mine.

Fatalities
1
Total incidents
52
Mines on record
4
Years on record
2001–2006
Compliance record
MSHA citations since 2001
1,070
citations
296
significant & substantial
$151,071
proposed penalties
$73,617
paid to date
49% of proposed penalties paid to date, a $77,454 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
126
inspections on record
7,672
inspection hours
13.9
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
1,070 citations across 7,672 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$151K
proposed penalties
$128K
current assessed
$74K
paid to date
$54K
outstanding
1,033 assessments are final orders; 21 contested dockets.
Of $69K in penalties contested before the Commission, $45K was upheld in final decisions.
As of the most recent assessment on 2006-05-08.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
28.3%
significant & substantial
7.4%
high negligence or reckless
29.8%
reasonably likely or greater
11.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.1% none, 2.5% low, 90.0% moderate, 7.4% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2006
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
23.99
total case rate
23.99
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 4.87 and the all-US-mining average was 3.91 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2006 * 23.99 23.99 0.000
2005 14.75 13.41 0.000
2004 8.95 7.16 0.000
2003 11.49 6.38 0.000
2002 * 13.62 11.35 2.270
2001 * 11.84 11.84 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2006-05-09, 20 years ago
87%
within 1.5 mg/m3
431
samples
9.28
dust max (mg/m3)
244 samples taken by MSHA inspectors, 187 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR166
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)58
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)24

Silica (quartz)

Last sampled: 2006-05-17, 20 years ago
4.7
silica avg (%)
33
samples
13.6
silica max (%)
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR13
  • CUTTING MACHINE OPERATOR3

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2005-08-16, 21 years ago
19%
over PEL
70
samples
Most-sampled occupations
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)18
  • CONTINUOUS MINER OPERATOR11
  • ROOF BOLTER (TWIN HEAD) (INTAKE SIDE)6
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
40 citations taken to the federal commission · 4% of citations on record
  • Settled 23 · 57%
  • Stood as issued 17 · 43%
95%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 39 decided S&S contests · industry: 79%
43%
Penalty reduction in decided contests
$48K proposed, $27K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2005-07-22. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
KENT 2005-56 Settlement Feldman 2005 $34K → $17K
KENT 2004-86 Settlement Bulluck 2004 $8K → $6K
KENT 2005-358 Default Lesnick 2006 $8K → $8K
KENT 2005-78 Settlement Bulluck 2005 $4K → $3K
KENT 2005-32 Settlement Zielinski 2005 $4K → $2K
KENT 2005-119 Settlement Zielinski 2005 $2K → $2K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2006
9
2005
11
2004
10
2003
12
2002
7 (1f)
2001
3

Mines on record

Fatalities under this operator

1 recorded
December 13, 2002 KY · Coal roof bolter, rock bolter, pinner, mobile roof support operator (mrs) Fatality · MACHINERY
American Mining & Manufacturing Corporation · Caught in, under or between a moving and a stationary object

WHILE ATTEMPTING TO INSTALL BOLTS IN THE ROOF, EMPLOYER HIT THE UP LEVER ON THE BOLT MACHINE. HIS HEAD WAS OVER TOP OF THE POT & IT CRUSHED HIS HEAD AGAINST THE CANOPY.

For insurers, brokers, and safety consultants

Where American Mining & Manufacturing Corp stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us