Big Creek Mining Inc · Struck by concussion
A NEIGHBOR AND ADJOINING LANDOWNER/LEASOR MADE AN UNAUTHORIZED ENTRY ON THE MINE SITE AND DID NOT RESPOND TO AUDIBLE BLASTING WARNINGS.
Big Creek Mining Inc: 1 recorded fatality operator
Controlled by
Terry Charles Marshall
MSHA operator ID: P22692
Watch this operator
Email me when a new MSHA incident is filed at any Big Creek Mining Inc mine.
Compliance record
MSHA citations since 2000
24
citations
18
significant & substantial
$3,935
proposed penalties
$3,826
paid to date
97% of proposed penalties paid to date, a $109 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
22
inspections on record
375
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 375 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$4K
proposed penalties
$4K
current assessed
$4K
paid to date
$0
outstanding
24 assessments are final orders; 2 contested dockets.
Of $90K in penalties contested before the Commission, $30K was upheld in final decisions.
As of the most recent assessment on 2000-08-10.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.75.0%
significant & substantial
0.0%
high negligence or reckless
79.2%
reasonably likely or greater
29.2%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 20.8% low, 79.2% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2000
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.1.12
total case rate
1.12
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 7.74 and the all-US-mining average was 5.64 cases per 100 workers.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2000-07-31, 26 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.97%
within 1.5 mg/m3
91
samples
1.77
dust max (mg/m3)
57 samples taken by MSHA inspectors, 34 by the operator.
Most-sampled occupations
- BLASTER/SHOOTER/SHOTFIRER31
- BULLDOZER OPERATOR19
- HIGHWALL DRILL OPERATOR16
Silica (quartz)
Last sampled: 2000-07-03, 26 years ago14.7
silica avg (%)
5
samples
16.4
silica max (%)
Most-sampled occupations
- BLASTER/SHOOTER/SHOTFIRER4
- BULLDOZER OPERATOR1
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2000-06-14, 26 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.7%
over PEL
28
samples
Most-sampled occupations
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE11
- BULLDOZER OPERATOR9
- HIGHLIFT OPERATOR/FRONT END LOADER5
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Contested penalties
ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| KENT20000163 | Settlement | Melick | 2000 | $90K → $30K |
| KENT20000208 | Settlement | Barbour | 2000 | $259 → $150 |
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Top causes
- EXPLOSIVES AND BREAKING AGENTS 1 fatality · 1 non-fatal
- SLIP OR FALL OF PERSON 8 non-fatal
- POWERED HAULAGE 4 non-fatal
- HANDLING OF MATERIALS 3 non-fatal
- MACHINERY 2 non-fatal
- FALL OF FACE/RIB/PILLAR/SIDE/HIGHWALL 1 non-fatal
Incident timeline
2000
1
1999
5 (1f)
1998
8
1997
3
1996
1
1995
3
Mines on record
Fatalities under this operator
1 recordedFor insurers, brokers, and safety consultants
Where Big Creek Mining Inc stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.