Mining Incidents

Daniels Branch Coal Company Inc: 1 recorded fatality operator

Controlled by Bruce Burgess
MSHA operator ID: P19241

Watch this operator

Email me when a new MSHA incident is filed at any Daniels Branch Coal Company Inc mine.

Fatalities
1
Total incidents
179
Mines on record
3
Years on record
1988–2002
Compliance record
MSHA citations since 2000
138
citations
48
significant & substantial
$14,733
proposed penalties
$14,733
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
86
inspections on record
2,591
inspection hours
5.3
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
138 citations across 2,591 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$15K
proposed penalties
$15K
current assessed
$15K
paid to date
$0
outstanding
138 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2002-05-06.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
34.8%
significant & substantial
3.6%
high negligence or reckless
34.8%
reasonably likely or greater
34.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 7.2% low, 89.1% moderate, 3.6% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2002
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
65.73
total case rate
65.73
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 6.89 and the all-US-mining average was 5.05 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2002 * 65.73 65.73 0.000
2001 23.02 20.14 0.000
2000 29.11 18.02 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2002-06-13, 24 years ago
96%
within 1.5 mg/m3
392
samples
4.62
dust max (mg/m3)
200 samples taken by MSHA inspectors, 192 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR187
  • MOBILE BRIDGE OPERATOR42
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)26

Silica (quartz)

Last sampled: 2002-06-04, 24 years ago
12.1
silica avg (%)
32
samples
28.1
silica max (%)
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR20
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)5

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2000-01-27, 26 years ago
7%
over PEL
15
samples
Most-sampled occupations
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)4
  • CONTINUOUS MINER OPERATOR3
  • MOBILE BRIDGE OPERATOR3
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Top causes

Incident timeline

2002
20
2001
19
2000
30
1999
18
1998
22
1997
11
1996
6
1995
8 (1f)
1994
4
1993
2
1992
4
1991
10
1990
11
1989
12
1988
2

Mines on record

Fatalities under this operator

1 recorded
April 18, 1995 WV · Coal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech Fatality · MACHINERY
Daniels Branch Coal Company Inc · Caught in, under or between a moving and a stationary object

EMPLOYEE WHILE REPAIRING A CONTINUOUS MINING MACHINE WAS POSITIONED IN THE BOOM OF SAID MACHINE,THE CONVEYOR CHAIN CAME ON DRAGGING HIM INTO THE TOP OR CONVEYOR FLIGHT RESULTING IN A SKULL FRA CTURE.

For insurers, brokers, and safety consultants

Where Daniels Branch Coal Company Inc stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us