Mining Incidents

John S Lane & Son Incorporated: 329 MSHA citations operator

Controlled by Peckham Industries Inc
MSHA operator ID: L00387

Watch this operator

Email me when a new MSHA incident is filed at any John S Lane & Son Incorporated mine.

Fatalities
0
Total incidents
135
Mines on record
5
Years on record
1984–2020
Compliance record
MSHA citations since 2000
329
citations
42
significant & substantial
$39,090
proposed penalties
$37,662
paid to date
96% of proposed penalties paid to date, a $1,428 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
181
inspections on record
3,315
inspection hours
9.9
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
329 citations across 3,315 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$39K
proposed penalties
$38K
current assessed
$38K
paid to date
$0
outstanding
328 assessments are final orders; 7 contested dockets.
Of $2K in penalties contested before the Commission, $821 was upheld in final decisions.
As of the most recent assessment on 2021-01-28.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
12.8%
significant & substantial
2.1%
high negligence or reckless
12.8%
reasonably likely or greater
45.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 39.3% low, 58.5% moderate, 2.1% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2021
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.87 and the all-US-mining average was 2.19 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2021 * 0.00 0.00 0.000
2020 3.66 3.66 0.000
2019 3.20 0.00 0.000
2018 3.17 3.17 0.000
2017 9.48 4.74 0.000
2016 3.18 1.59 0.000
2015 0.00 0.00 0.000
2014 7.50 6.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2020-01-14, 6 years ago
14%
of limit-tested samples over the exposure limit
66
samples
36
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz265 over
  • Respirable dust, <.1mg26
  • Arsenic fumes5
  • Beryllium fumes5
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
10 citations taken to the federal commission · 3% of citations on record
  • Settled 9 · 90%
  • Stood as issued 1 · 10%
20%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 5 decided S&S contests · industry: 79%
63%
Penalty reduction in decided contests
$2K proposed, $821 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2019-09-22. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
YORK 2011-303M Settlement Moran 2012 $1K → $100
YORK 2011-21M Settlement Lesnick 2011 $425 → $100
YORK 2007-58M Settlement Lesnick 2007 $240 → $240
YORK 2010-86M Settlement Gill 2011 $200 → $200
YORK 2019-0086 Dismissal Moran 2019 $121 → $121
YORK 2008-230M Dismissal Lesnick 2009 $100 → $0
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2020
2
2019
2
2018
2
2017
6
2016
2
2014
5
2013
1
2010
2
2008
3
2007
10
2006
6
2005
3
2004
6
2003
4
2002
8
2001
1
2000
3
1999
3
1998
2
1997
4
1996
4
1995
5
1994
5
1993
7
1992
9
1991
6
1990
5
1989
2
1988
2
1987
3
1986
7
1985
3
1984
2

Mines on record

For insurers, brokers, and safety consultants

Where John S Lane & Son Incorporated stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us