Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← All operators

Lily Group Inc: 180 MSHA citations operator

Controlled by Rick Risinger
MSHA operator ID: 0109105

Watch this operator

Email me when a new MSHA incident is filed at any Lily Group Inc mine.

Fatalities
0
Total incidents
2
Mines on record
1
Years on record
2012
Compliance record
MSHA citations since 2010
180
citations
61
significant & substantial
$59,302
proposed penalties
$31,371
paid to date
53% of proposed penalties paid to date, a $27,931 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2010
42
inspections on record
1,571
inspection hours
11.5
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
180 citations across 1,571 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$59K
proposed penalties
$59K
current assessed
$31K
paid to date
$28K
outstanding
177 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2014-10-21.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
34.5%
significant & substantial
11.9%
high negligence or reckless
34.5%
reasonably likely or greater
23.2%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.6% low, 87.6% moderate, 11.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2013
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.94 and the all-US-mining average was 2.99 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2013 * 0.00 0.00 0.000
2012 3.23 3.23 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2013-09-10, 12 years ago
100%
within 1.5 mg/m3
88
samples
1.48
dust max (mg/m3)
62 samples taken by MSHA inspectors, 26 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR24
  • BULLDOZER OPERATOR9
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)7

Silica (quartz)

Last sampled: 2011-10-05, 14 years ago
10.3
silica avg (%)
1
samples
10.3
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR1
See US coal mines ranked by silica in their dust samples.

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2013-09-10, 12 years ago
0%
over PEL
18
samples
Most-sampled occupations
  • BACKHOE OPERATOR2
  • CLEANING PLANT OPERATOR2
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE2
See US mines ranked by noise samples over the legal limit.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Top causes

Incident timeline

2012
2

Mines on record

For insurers, brokers, and safety consultants

Where Lily Group Inc stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us