Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← All operators

Regal Rock Inc: 70 MSHA citations operator

Controlled by Richard G Preservati; Nancy K Preservati
MSHA operator ID: L15534

Watch this operator

Email me when a new MSHA incident is filed at any Regal Rock Inc mine.

Fatalities
0
Total incidents
4
Mines on record
1
Years on record
1998–2003
Compliance record
MSHA citations since 2000
70
citations
24
significant & substantial
$9,545
proposed penalties
$9,545
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
19
inspections on record
335
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 335 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$10K
proposed penalties
$10K
current assessed
$10K
paid to date
$0
outstanding
70 assessments are final orders; 1 contested dockets.
Of $835 in penalties contested before the Commission, $346 was upheld in final decisions.
As of the most recent assessment on 2004-11-17.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
34.3%
significant & substantial
8.6%
high negligence or reckless
34.3%
reasonably likely or greater
61.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 8.6% low, 82.9% moderate, 8.6% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2002
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 4.17 and the all-US-mining average was 5.05 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2004-09-23, 21 years ago
100%
within 1.5 mg/m3
4
samples
0.82
dust max (mg/m3)
4 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
  • CAR DROPPER2
  • HIGHLIFT OPERATOR/FRONT END LOADER1
  • PREPARATION PLANT FOREMAN1

Silica (quartz)

Last sampled: 2004-09-29, 21 years ago
1.4
silica avg (%)
1
samples
1.4
silica max (%)
Most-sampled occupations
  • HIGHLIFT OPERATOR/FRONT END LOADER1
See US coal mines ranked by silica in their dust samples.

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2004-09-23, 21 years ago
0%
over PEL
4
samples
Most-sampled occupations
  • CAR DROPPER2
  • ASSIST MINE FOREMAN/ASSIST MINE MANAGER1
  • HIGHLIFT OPERATOR/FRONT END LOADER1
See US mines ranked by noise samples over the legal limit.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2004-04-15, 22 years ago
60%
of limit-tested samples over the exposure limit
7
samples
5
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz53 over
  • Respirable dust, <.1mg2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Contested penalties
ⓘ A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEVA 2004-81-M Withdrawal Lesnick 2004 $835 → $346
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2003
1
1999
1
1998
2

Mines on record

For insurers, brokers, and safety consultants

Where Regal Rock Inc stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us