Scott B Haines; John R Kibblehouse Jr; Harry Christian Budenz; James Ha: 139 MSHA citations controller
MSHA controller ID: 0174800
Watch this controller
Email me when a new MSHA incident is filed at any mine Scott B Haines; John R Kibblehouse Jr; Harry Christian Budenz; James Ha controls.
- Fatalities
- 0
- Total incidents
- 36
- Mines on record
- 12
- Years on record
- 2023–2026
Compliance record
MSHA citations since 2023
139
citations
31
significant & substantial
$23,077
proposed penalties
$23,077
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Labor enforcement (WHD)
US Labor Department wage findings since 2014
1
labor cases
$290
back wages owed
1
employees affected
Violation types
Wage & hour (FLSA) (1)
Source: US DOL Wage and Hour Division enforcement records, matched by employer name and state.
Inspection activity
MSHA inspections since 2023
120
inspections on record
1,820
inspection hours
7.6
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.139 citations across 1,820 inspection hours.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
ⓘ
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.1
Section 107(a) orders
Most recent order: 2024-06-20.
On record since 2024.
Source: MSHA imminent-danger order records, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$23K
proposed penalties
$23K
current assessed
$23K
paid to date
$0
outstanding
132 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-06-24.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.22.5%
significant & substantial
2.9%
high negligence or reckless
22.5%
reasonably likely or greater
35.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 39.1% low, 58.0% moderate, 2.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2025
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.4.65
total case rate
1.16
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2026 | 8.89 | 3.81 | 0.000 |
| 2025 | 4.65 | 1.16 | 0.000 |
| 2024 | 6.39 | 1.74 | 0.000 |
| 2023 | 3.31 | 1.10 | 0.000 |
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2026-06-17
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.6%
of limit-tested samples over the exposure limit
103
samples
34
limit-tested
Most sampled contaminants
- Quartz, respirable, >1% Qtz152 over
- Respirable dust, <.1mg38
- Asbestos 0.1f/cc18
- Fibers, >5um18
Area samples (mill and shop air)
Last sampled: 2026-03-031
samples
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Top causes
- HANDLING OF MATERIALS 17 non-fatal
- HANDTOOLS (NONPOWERED) 6 non-fatal
- SLIP OR FALL OF PERSON 6 non-fatal
- MACHINERY 2 non-fatal
- OTHER 2 non-fatal
- POWERED HAULAGE 2 non-fatal
Incident timeline
2026
8
2025
9
2024
11
2023
8
Operators under this controller
Mines on record
For insurers, brokers, and safety consultants
Where Scott B Haines; John R Kibblehouse Jr; Harry Christian Budenz; James Ha stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.