Mining Incidents

1013 Coolidge: 48 MSHA citations Metal/Non-Metal

Controlled by Arcosa, Inc
Coolidge, Pinal County, AZ  ·  Active
MSHA Mine ID: 0203338

1013 Coolidge has $10K in proposed MSHA penalties and $125 outstanding across 12 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at 1013 Coolidge.

Fatalities
0
Total incidents
10
Years on record
2016–2024
Latest incident
Feb 2024
Compliance record
MSHA citations since 2015
48
citations
15
significant & substantial
$10,162
proposed penalties
$9,465
paid to date
93% of proposed penalties paid to date, a $697 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2015
37
inspections on record
396
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 396 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

1013 Coolidge has $10K in proposed MSHA penalties and $125 outstanding across 12 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$10K
proposed penalties
$10K
current assessed
$9K
paid to date
$125
outstanding
48 assessments are final orders; 12 contested dockets.
Of $7K in penalties contested before the Commission, $5K was upheld in final decisions.
As of the most recent assessment on 2025-10-29.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
31.2%
significant & substantial
0.0%
high negligence or reckless
31.2%
reasonably likely or greater
47.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 10.4% low, 89.6% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
31 citations taken to the federal commission · 65% of citations on record
  • Settled 20 · 65%
  • Stood as issued 4 · 13%
  • Vacated or withdrawn 7 · 23%
64%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 14 decided S&S contests · industry: 79%
21%
Penalty reduction in decided contests
$7K proposed, $5K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2024-11-17.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2023-0119 Settlement Simonton 2023 $2K → $2K
WEST 2025-0064 Settlement Simonton 2026 $1K → $1K
WEST 2019-0291 Settlement Miller 2019 $679 → $423
WEST 2017-0043 Settlement Miller 2017 $494 → $380
WEST 2020-0187 Settlement 2020 $405 → $205
WEST 2017-0432 Settlement Miller 2017 $348 → $232
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2024-12-06
50%
of limit-tested samples over the exposure limit
8
samples
2
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz21 over
  • Respirable dust, <.1mg6
Show the individual readings (8)
Date Contaminant Concentration Limit Conc / limit Occupation
2021-04-14 Quartz, respirable, >1% Qtz 1.74 0.38 4.58 Crusher Oper/Worker
2024-12-06 Respirable dust, <.1mg 0 Crusher Oper/Worker
2024-12-06 Quartz, respirable, >1% Qtz 0.34 0.45 0.76 Crusher Oper/Worker
2022-09-28 Respirable dust, <.1mg 0 Truck Driver
2021-06-09 Respirable dust, <.1mg 0 Crusher Oper/Worker
2021-04-14 Respirable dust, <.1mg 0 Front-end Loader Operator
2019-02-08 Respirable dust, <.1mg 0 Front-end Loader Operator
2019-02-08 Respirable dust, <.1mg 0 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

1013 Coolidge recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Arizona, metal and nonmetal mining averaged 1.81 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 8.38 8.38 0.000
2022 * 9.54 9.54 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Southwest Rock Products 2014 to 2022
  2. Arcosa Aggregates West, LLC. 2022 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 6
2025 11
2024 11
2023 11
2022 18
2021 9
2020 7
2019 6
2018 10
2017 8
2016 7
2015 6
2014 4
Source: MSHA quarterly employment and production, updated weekly.

1013 Coolidge sits in Pinal County, Arizona, where the Census mining category is 0.8% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Pinal County, Arizona · Population 449,219
0.8%
Mining share of county employment
$77,588
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 2,786 0 0 0.0
2026 Q1 4,660 0 0 0.0
2025 Q4 5,768 5 3 866.9
2025 Q3 7,581 0 0 0.0
2025 Q2 6,376 3 0 470.5
2025 Q1 5,612 0 0 0.0
2024 Q4 7,212 1 0 138.7
2024 Q3 6,150 0 0 0.0
Show 41 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 5,061 4 1 790.4
2024 Q1 5,457 0 0 0.0
2023 Q4 2,456 0 0 0.0
2023 Q3 3,848 0 0 0.0
2023 Q2 3,589 1 0 278.6
2023 Q1 4,705 0 0 0.0
2022 Q4 4,553 8 6 1757.1
2022 Q3 4,414 0 0 0.0
2022 Q2 6,669 0 0 0.0
2022 Q1 5,330 2 0 375.2
2021 Q4 4,586 0 0 0.0
2021 Q3 2,801 0 0 0.0
2021 Q2 3,951 1 0 253.1
2021 Q1 3,441 0 0 0.0
2020 Q4 3,393 0 0 0.0
2020 Q3 3,352 1 1 298.3
2020 Q2 2,742 0 0 0.0
2020 Q1 3,008 0 0 0.0
2019 Q4 2,357 3 1 1272.8
2019 Q3 2,135 0 0 0.0
2019 Q2 2,229 0 0 0.0
2019 Q1 3,022 4 2 1323.6
2018 Q4 4,956 0 0 0.0
2018 Q3 5,374 2 0 372.2
2018 Q2 3,896 0 0 0.0
2018 Q1 3,863 0 0 0.0
2017 Q4 5,807 2 0 344.4
2017 Q3 5,224 0 0 0.0
2017 Q2 2,525 2 0 792.1
2017 Q1 2,835 2 0 705.5
2016 Q4 3,136 0 0 0.0
2016 Q3 4,192 2 1 477.1
2016 Q2 3,340 0 0 0.0
2016 Q1 3,007 4 0 1330.2
2015 Q4 2,715 0 0 0.0
2015 Q3 2,441 1 0 409.7
2015 Q2 2,556 0 0 0.0
2015 Q1 2,508 0 0 0.0
2014 Q4 2,676 0 0 0.0
2014 Q3 2,327 0 0 0.0
2014 Q2 0 0 0
No fatalities recorded at this mine.

Reportable incidents

10 on file

2024 · 1 incident

February 7, 2024 AZ · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Arcosa Aggregates West, LLC. · Over-exertion (Not Elsewhere Classified)

On 2-7-24 between 5 and 6 am. employee was checking the 57-rock stacker during routine monitoring of plant. EE noticed that belt #1 feeding the 57-rock stacker had stopped. EE started making way to the control panel to shut off belt to prevent overflow. On EE's way to the control panel to shut it off, EE stepped wrong hurting their left foot around the achilleas area.

2023 · 2 incidents

June 6, 2023 AZ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Arcosa Aggregates West, LLC. · Struck against a moving object

The employee was operating a 988 loader when EE's back began to hurt. EE was diagnosed with a back sprain. Lost time as of 6/7/23.

May 4, 2023 AZ · Metal/Non-Metal crusher attendant/operator, pan feeder operator/worker STRIKING OR BUMPING
Arcosa Aggregates West, LLC. · Struck against stationary object

Employee was on EE's knees shoveling. When EE finished, EE put EE's hand down to help self up and contacted a sharp rock with EE's hand, resulting a cut that needed stitches.

2022 · 1 incident

June 27, 2022 AZ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Southwest Rock Products · Over-exertion in pulling or pushing objects

The employee was assisting the crushing and screening plant operator with a screen change. As employee was lifting one of the screens to replace it, employee felt a "pull" in shoulder, causing pain.

2021 · 1 incident

March 18, 2021 AZ · Metal/Non-Metal crusher attendant/operator, pan feeder operator/worker MACHINERY
Southwest Rock Products · Struck by flying object

The employee was shoveling by the chute of a sand and gravel screen when a rock bounced off the chute and hit the employee on the hard hat. The employee complained of neck pain and was seen at an urgent care. Loss of time as of 3/19/21.

2019 · 2 incidents

April 11, 2019 AZ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Southwest Rock Products · Over-exertion in pulling or pushing objects

The injured employee and another employee were pulling wire and dismantling a crushing unit. While pulling wire, the employee felt a jolt of pain in shoulder.

January 8, 2019 AZ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDTOOLS (NONPOWERED)
Southwest Rock Products · Over-exertion in wielding or throwing objects

Employee was removing rocks from the grizzly bars at the feeder with a sledge hammer. While doing this, the employee felt a pain in back. Injury reported 1/9/19 and lost time as of 1/10/19.

2018 · 1 incident

March 8, 2018 AZ · Metal/Non-Metal crusher attendant/operator, pan feeder operator/worker NONPOWERED HAULAGE
Southwest Rock Products · Over-exertion in lifting objects

The employee claims to have been shoveling 3/8 rock into a wheel barrow while cleaning up the plant. Upon lifting the wheel barrow full of 3/8 rock, the employee felt "tearing and pain" in the abdomen. The employee was later diagnosed with two hernias.

2017 · 1 incident

August 11, 2017 AZ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator DISORDERS (PHYSICAL AGENTS)
Southwest Rock Products · Contact with heat

Employee is a loader operator. When the air conditioning in the loader was unable to be repaired, the employee elected to run the loader (unbeknownst to Supervisor). Towards the end of the day, the employee complained of not feeling well, was seen in the emergency room and diagnosed with dehydration. Employee returned to work 8/14/17 (no lost time).

2016 · 1 incident

May 24, 2016 AZ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Southwest Rock Products · Struck by... (Not Elsewhere Classified)

Employee was preparing to top off the radiator of a 980 loader. When the employee unlatched the hood, the latch crushed a rock and the debris flew into the employee's eyes.