Mining Incidents

1016 Peoria: 53 MSHA citations Metal/Non-Metal

Controlled by Arcosa, Inc
San Tan Valley, Maricopa County, AZ  ·  Active
MSHA Mine ID: 0203359

1016 Peoria has $18K in proposed MSHA penalties and $443 outstanding across 7 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at 1016 Peoria.

Fatalities
0
Total incidents
13
Years on record
2017–2024
Latest incident
Jul 2024
Compliance record
MSHA citations since 2016
53
citations
23
significant & substantial
$18,350
proposed penalties
$17,737
paid to date
97% of proposed penalties paid to date, a $613 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2016
34
inspections on record
449
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 449 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

1016 Peoria has $18K in proposed MSHA penalties and $443 outstanding across 7 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$18K
proposed penalties
$18K
current assessed
$18K
paid to date
$443
outstanding
53 assessments are final orders; 7 contested dockets.
Of $4K in penalties contested before the Commission, $3K was upheld in final decisions.
As of the most recent assessment on 2026-02-26.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
43.4%
significant & substantial
11.3%
high negligence or reckless
43.4%
reasonably likely or greater
43.4%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 13.2% low, 75.5% moderate, 11.3% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
19 citations taken to the federal commission · 36% of citations on record
  • Settled 8 · 42%
  • Stood as issued 6 · 32%
  • Vacated or withdrawn 5 · 26%
67%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 9 decided S&S contests · industry: 79%
20%
Penalty reduction in decided contests
$4K proposed, $3K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2024-11-17.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2021-0219 Default 2021 $2K → $2K
WEST 2017-0433 Settlement Miller 2017 $694 → $348
WEST 2025-0065 Settlement Simonton 2025 $554 → $441
WEST 2019-0351 Settlement McCarthy 2019 $253 → $132
WEST 2018-0450 Withdrawal Manning 2018 $118 → $0
WEST 2017-0639 Settlement Manning 2018 $116 → $116
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2025-09-24
0%
of limit-tested samples over the exposure limit
6
samples
1
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg4
  • Quartz, respirable, >1% Qtz1
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (6)
Date Contaminant Concentration Limit Conc / limit Occupation
2025-09-24 Respirable dust, <.1mg 0 Crusher Oper/Worker
2025-09-24 Respirable dust, <.1mg 0 Front-end Loader Operator
2025-09-24 Respirable dust, <.1mg 0 Utility Man
2017-05-18 Unlisted Particulate, respirable, <1% Qtz 0.16 Welder, etc.
2017-05-18 Respirable dust, <.1mg 0 Truck Driver
2017-05-18 Quartz, respirable, >1% Qtz 0.21 0.9 0.23 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

1016 Peoria recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Arizona, metal and nonmetal mining averaged 1.81 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 * 17.00 11.34 0.000
2023 * 5.41 5.41 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 10.67 10.67 0.000
2019 * 5.94 0.00 0.000
2018 * 17.24 17.24 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Southwest Rock Products 2015 to 2022
  2. Arcosa Aggregates West, LLC. 2022 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 11
2025 11
2024 18
2023 23
2022 16
2021 16
2020 18
2019 15
2018 11
2017 12
2016 8
2015 3
Source: MSHA quarterly employment and production, updated weekly.

1016 Peoria sits in Maricopa County, Arizona, where the Census mining category is 0.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Maricopa County, Arizona · Population 4,491,987
0.2%
Mining share of county employment
$85,518
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 5,433 0 0 0.0
2026 Q1 6,182 6 3 970.6
2025 Q4 6,657 0 0 0.0
2025 Q3 8,785 2 1 227.7
2025 Q2 8,431 0 0 0.0
2025 Q1 8,180 8 4 978.0
2024 Q4 8,087 0 0 0.0
2024 Q3 8,769 3 0 342.1
Show 36 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 8,769 0 0 0.0
2024 Q1 9,659 1 0 103.5
2023 Q4 10,465 0 0 0.0
2023 Q3 9,486 2 1 210.8
2023 Q2 8,926 0 0 0.0
2023 Q1 8,075 2 0 247.7
2022 Q4 6,382 0 0 0.0
2022 Q3 7,043 0 0 0.0
2022 Q2 8,601 0 0 0.0
2022 Q1 8,988 0 0 0.0
2021 Q4 8,954 0 0 0.0
2021 Q3 7,820 0 0 0.0
2021 Q2 8,726 0 0 0.0
2021 Q1 8,484 6 5 707.2
2020 Q4 8,337 0 0 0.0
2020 Q3 8,555 0 0 0.0
2020 Q2 9,979 1 0 100.2
2020 Q1 10,604 0 0 0.0
2019 Q4 10,807 0 0 0.0
2019 Q3 8,647 0 0 0.0
2019 Q2 7,880 0 0 0.0
2019 Q1 6,311 1 1 158.5
2018 Q4 4,983 0 0 0.0
2018 Q3 5,708 0 0 0.0
2018 Q2 6,531 1 0 153.1
2018 Q1 5,980 0 0 0.0
2017 Q4 6,280 3 2 477.7
2017 Q3 6,310 0 0 0.0
2017 Q2 6,262 5 2 798.5
2017 Q1 5,785 3 0 518.6
2016 Q4 5,315 0 0 0.0
2016 Q3 4,451 2 0 449.3
2016 Q2 3,401 0 0 0.0
2016 Q1 2,084 0 0 0.0
2015 Q4 2,336 0 0 0.0
2015 Q3 0 0 0
No fatalities recorded at this mine.

Reportable incidents

13 on file

2024 · 3 incidents

July 3, 2024 AZ · Metal/Non-Metal dry screening plant operator, screen house operator POWERED HAULAGE
Arcosa Aggregates West, LLC. · Struck against a moving object

On 7-3-24, employee woke up with a sore back. During the shift, they operated a 980m Front End loader. About halfway through the shift, they got off the loader to work on the wash plant. They got back in the loader and around 10:00 a.m., they informed the Plant Manager of a minor pain in their back.

April 23, 2024 AZ · Metal/Non-Metal water truck operator EXPLODING VESSELS UNDER PRESSURE
Arcosa Aggregates West, LLC. · Struck by flying object

The employee was airing up/checking the pressures of the tires of the water truck. After checking the pressure of one of the tires, the employee went to grab the air chuck to add air to the tire. As EE approached, the tire blew out. The employee was about 4 feet away from the tire, but the air pressure blew EE's safety glasses against EE's eyes and debris into EE's eyes.

February 26, 2024 AZ · Metal/Non-Metal mine manager, mine foreman, mine owner MACHINERY
Arcosa Aggregates West, LLC. · Caught in, under or between running or meshing objects

On 2-26-24 EE was using a MAG drill to drill holes on the inside frame of a stacker. In operation EE attempted to clean the metal that was stuck to the drill bit. The drill bit caught EE's glove entangling EE's hand into the drill bit. An employee that was assisting hit the emergency stop on the drill. The entanglement resulted in a laceration to right hand.

2023 · 1 incident

October 5, 2023 AZ · Metal/Non-Metal welder (shop) SLIP OR FALL OF PERSON
Arcosa Aggregates West, LLC. · Fall from machine

EE was on top of a conveyor hooking up chains to the lifting eyes to lift the conveyor with the 988k Loader. EE signaled to the loader to put pressure on the chains and then unhooked the fall protection to be able to climb down. The chains that were attached then slipped causing the employee to fall off the side of the conveyor 10 feet to the ground.

2020 · 2 incidents

July 14, 2020 AZ · Metal/Non-Metal washer operator, sizing operator POWERED HAULAGE
Southwest Rock Products · Caught in, under or between running or meshing objects

The employee was checking the tightness of the belts when the machine activated, pinching employee's fingers between the belt and the pulley.

July 11, 2020 AZ · Metal/Non-Metal washer operator, sizing operator HANDLING OF MATERIALS
Southwest Rock Products · Over-exertion in wielding or throwing objects

Employee claims to have been shoveling dirt and rock the previous day. The following day, back was sore. Lost time accident as of 7/13/20.

2019 · 1 incident

May 20, 2019 AZ · Metal/Non-Metal weighman, scale person SLIP OR FALL OF PERSON
Southwest Rock Products · Fall to the walkway or working surface

The employee was walking to the port-a-john when plastic (trash) wrapped around their leg and tripped them. They hit the gravel causing cuts to their hand and forehead. No lost time, but sought treatment on 5-20-19.

2018 · 2 incidents

November 12, 2018 AZ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Southwest Rock Products · Struck by falling object

The injured employee and another employee were moving a large piece of plate steel. The injured employee dropped their end and the plate steel struck their leg and landed on their foot.

April 18, 2018 AZ · Metal/Non-Metal crusher attendant/operator, pan feeder operator/worker SLIP OR FALL OF PERSON
Southwest Rock Products · Fall from machine

The employee had just gotten finished changing screens on the JCI screen. As ee was rushing to get back to the MCC to get the plant started back up, ee missed the second from the top step and fell approximately 10' to the ground, landing on left foot. The employee complained of pain in ankle. No fracture or deformity observed. Became a loss work injury on 4/19/2018.

2017 · 4 incidents

August 29, 2017 AZ · Metal/Non-Metal welder (shop) STEPPING OR KNEELING ON OBJECT
Southwest Rock Products · Struck against stationary object

The employee was moving a metal beam from one area to another. There were lifting chains on the ground nearby that the employee didn't see. While carrying the beam, the employee stepped on the chains, the chains and the employees foot slid out from under EE, and EE's knee twisted. Employee referred to doctor for evaluation.

July 19, 2017 AZ · Metal/Non-Metal welder (non-shop) SLIP OR FALL OF PERSON
Southwest Rock Products · Over-exertion (Not Elsewhere Classified)

The miner was walking from EE's welding truck to the parts room when EE's foot slid in mud on concrete. When EE's foot slid, EE's knee twisted. The miner continued to work until 7/24/2017, when EE was sent to the doctor. EE received PT and medication. Injury became reportable on 7/24/2017.

July 14, 2017 AZ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator MACHINERY
Southwest Rock Products · Contact with hot objects or substances

The miner was assisting a welder with fabrication activities when slag entered glove cuff and burned three fingers. The miner declined treatment at the time. The following Monday (7-17-2017), the miner complained of pain and swelling and was sent to an urgent care for treatment. Did not become a lost time accident until 7-18-2017.

January 20, 2017 AZ · Metal/Non-Metal crusher attendant/operator, pan feeder operator/worker HANDLING OF MATERIALS
Southwest Rock Products · Over-exertion in lifting objects

The employee was doing excessive shoveling the previous Wednesday, woke up Thursday with back a little sore, worked Thursday, woke up Friday with intense back pain, but still came to work. Injury reported 1/20/2017 and became a lost time accident 1/23/2017.