Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← Back to search

1316: 20 MSHA citations Metal/Non-Metal

APAC-Central, Inc. · Surface
Controlled by CRH PLC
Fayetteville, Washington County, AR  ·  Abandoned
MSHA Mine ID: 0302061

1316 has $5K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at 1316.

Fatalities
0
Total incidents
1
Years on record
2023
Latest incident
Mar 2023
Compliance record
MSHA citations since 2017
20
citations
2
significant & substantial
$5,009
proposed penalties
$5,009
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
See APAC-Central, Inc.'s full MSHA compliance history →
Inspection activity
MSHA inspections since 2017
14
inspections on record
196
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 196 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

1316 has $5K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$5K
proposed penalties
$5K
current assessed
$5K
paid to date
$0
outstanding
20 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2025-06-11.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
10.0%
significant & substantial
30.0%
high negligence or reckless
10.0%
reasonably likely or greater
35.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 25.0% low, 45.0% moderate, 30.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2025-06-11
0%
of limit-tested samples over the exposure limit
4
samples
2
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz2
  • Respirable dust, <.1mg2
Show the individual readings (4)
Date Contaminant Concentration Limit Conc / limit Occupation
2025-06-11 Quartz, respirable, >1% Qtz 0.16 0.28 0.57 Utility Man
2025-06-11 Respirable dust, <.1mg 0 Supervisor, Co. Official
2019-10-09 Respirable dust, <.1mg 0 Crusher Oper/Worker
2019-10-09 Quartz, respirable, >1% Qtz 0.98 1.45 0.68 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

1316 recorded 0.00 reportable injury cases per 100 full-time workers in 2024.

Injury rate, 2024
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.77 and the all-US-mining average was 2.08 cases per 100 workers.
In Arkansas, metal and nonmetal mining averaged 1.29 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2024 * 0.00 0.00 0.000
2023 * 7.56 0.00 0.000
2022 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. APAC-Central, Inc. 2017 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 0
2025 2
2024 14
2023 12
2022 13
2021 15
2020 15
2019 10
2018 8
2017 6
Source: MSHA quarterly employment and production, updated weekly.

1316 sits in Washington County, Arkansas, where the Census mining category is 0.2% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Washington County, Arkansas · Population 251,863
0.2%
Mining share of county employment
$66,426
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q1 0 0 0
2025 Q4 829 0 0 0.0
2025 Q3 1,642 0 0 0.0
2025 Q2 1,711 1 1 584.5
2025 Q1 0 0 0
2024 Q4 2,885 0 0 0.0
2024 Q3 7,718 0 0 0.0
2024 Q2 7,977 0 0 0.0
Show 27 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q1 5,266 0 0 0.0
2023 Q4 7,205 1 0 138.8
2023 Q3 6,565 1 0 152.3
2023 Q2 7,049 0 0 0.0
2023 Q1 5,632 5 0 887.8
2022 Q4 7,290 0 0 0.0
2022 Q3 5,637 1 0 177.4
2022 Q2 7,168 0 0 0.0
2022 Q1 6,088 0 0 0.0
2021 Q4 4,887 2 0 409.2
2021 Q2 4,890 0 0 0.0
2021 Q1 11,764 0 0 0.0
2020 Q4 8,253 0 0 0.0
2020 Q3 5,674 0 0 0.0
2020 Q2 5,221 0 0 0.0
2020 Q1 5,743 0 0 0.0
2019 Q4 4,724 0 0 0.0
2019 Q3 4,243 0 0 0.0
2019 Q2 3,528 0 0 0.0
2019 Q1 3,436 0 0 0.0
2018 Q4 3,316 0 0 0.0
2018 Q3 4,595 0 0 0.0
2018 Q2 3,756 0 0 0.0
2018 Q1 3,244 0 0 0.0
2017 Q4 1,505 0 0 0.0
2017 Q3 4,071 1 0 245.6
2017 Q2 1,152 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

1 on file

2023 · 1 incident

March 7, 2023 AR · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
APAC-Central, Inc. · Struck by flying object

Employee was welding and felt a foreign particle get into right eye from behind welding hood. PPE-welding hood and prescription safety glasses. employee flushed their eyes, Later that afternoon they reported the injury and medical treatment was provided at the clinic.