Owner of J&P equipment cleaning was working on a steam cleaning engine when one of his employees noticed that he was slumped over the engine. This is still under investgation by MSHA.
Thunder RidgeCoal
- Fatalities
- 1
- Total incidents
- 40
- Years on record
- 2000–2021
- Latest incident
- Sep 2021
Fatalities at this mine
1 recordedReportable incidents
39 on file (excluding fatalities above)2021 · 1 incident
Employee was attempting to install the rear belly pan on a D10T dozer. Employee had the belly pan supported with a chain that was draped over a cross member to hold the belly pan. As employee was lining bolt holes up with a pry bar one corner came unhooked causing the pry bar to hit employee in the left wrist.
2015 · 4 incidents
removing a yoke from the water pump with pry bar, bar slipped off hitting and lacerating lip
Employee got off loader and while climbing back up he pulled on ladder and felt pain in his right shoulder.
Employee was driving a rock truck and lost control and hit a parked employee bus and a track drill. Started missing work 8/17/2015.
Employee told Foreman on 3/17/2015 that he had hit a dip in the road and bounced up in his seat, landing on his left testicle. He went to doctor with swelling and possible rupture. Exact time of incident is unknown. Time is referenced because it is required above.
2014 · 5 incidents
Just had safety meeting with State inspector. Had been raining, walking up ladder and thought someone yelled out his name. Turned, tripped on next to last step falling onto step and platform. Fell on left side and shoulder.
EE was climbing down off a 993K loader when his hand slipped. He stepped down onto a rock causing his right ankle to turn and his knee to twist and pop. Finished shift and was taken on 11/04/2014 to Hazard ARH ER. Diagnosed with a sprained right knee.
Getting on dozer and foot slipped. Caught himself with right arm. Thought he would be ok and finished out the week. On 10/13/2014, he was taken to be examined at Hazard ARH by Safety Director. X-ray showed nothing but doctor thought it could be a possible torn rotator cup. MRI has been requested and victim has been off work since 10/13/2014.
Victim bent over to hook up strap on drill sub and felt stinger in back.
Grabbed hood and put feet on bumper of Kenworth truck by himself to try to lift hood. As he pulled he felt pain in lower to mid left side of stomach. Taken to ER and CT was done. Showed negative and doctor said he had pulled a muscle.
2010 · 3 incidents
Helping mechanic change tilt cylinder. Employee was hitting a collet with a hammer and struck left thumb.
Employee was removing a filter from a 993-K Cat loader. As he put pressure on the wrench, he developed a pain in his right shoulder.
EE was hauling shot rock in a 785B Caterpillar Rock truck and as he was backing up to dump area his right rear tires set down causing the truck to overturn.The truck came to rest approximately 174 feet down in the hollow fill.
2009 · 4 incidents
This accident was reported in Dec.09 as a minor incident.EE was servicing a truck bumped his head he refused medical treatment continued to work and on Feb. 25,2010 we were made aware that the EE had taken off work due to the 2009 incident.EE is now under Dr. care.
Employee was trouble shooting a fault light on a 992-G Caterpillar loader, when the service compartment fell, causing injury to his left hand.
Technician was hammering on E-Bar pin in stall. A piece of the pin broke off and struck leg.
EE stated he was feeling ill and decieded to get some fresh air and when he opened the door on the dozer he passed out and fell off the dozer causing him to recieve several cracked ribs.
2007 · 3 incidents
EE was removing a tooth from the ripper of a D-11 dozer when a piece of metal flew off striking him in his right leg. EE spent one night in hospital while metal was removed.
Employee was using a grinder on a grader blade. Grinder slipped striking him in knee causing a small laceration which required stitches. He returned to work on same shift.
Employee stumbled on a oil hose and struck elbow on a rock.
2006 · 2 incidents
Employee was attempting to close doors on anfo bin. When the door shut it caught his middle finger on left hand. Four stitches were required to close wound.
While installing a fender on a D10 dozer, employee's hand was mashed when fender slipped.
2005 · 3 incidents
While changing out grease pump employee felt pain in left shoulder. X-rays were negative. We are now awaiting approval of an MRI by insurance carrier.
Employee while driving a loaded 777B Cat truck backed over the dumping area and the truck over-turned causing serious injuries (broken ribs, arm, back, fractured sternum, collapsed lungs). Employee was airlifted to medical center.
EMPLOYEE WAS REMOVING TIN ROOFING FROM A BUILDING WHEN HE FELL.
2004 · 3 incidents
Swivel socket broke while removing a bolt and cut mechanic's left hand.
Rock came off highwal busting window and striking operator over right eye.
EMPLOYEE LIFTED A STARTER TO PUT IT INTO A ROCK TRUCK WHEN HE BEGAN TO FEEL PAIN IN THE JOINT OF HIS LEFT SHOULDER. HE DID NOT BEGIN LOSING TIME UNTIL 1/22/04.
2003 · 2 incidents
EE WAS OPERATING A CAT 980 G LOADER WHEN BUCKET CAME IN CONTACT WITH ROCK CAUSING A SUDDEN JAR RESULTING IN PAIN IN LOWER BACK. EE CONTINUED WORKING UNTIL CONSULTING A DR ON 11-12-03 WHO THE P LACED EE OFF WORK.
LOADER DROPPED ROCK IN BED OF TRUCK CAUSING JAR TO DRIVER EE. EE REFUSE ANY MEDICAL TREATMENT AND CONTINUED WORKING UNTIL 1-10-04 WHEN HE WENT TO DR. AND WAS PUT OFF WORK. THIS WAS NOT A REPOR TABLE ACCIDENT UNTIL THIS DATE.
2002 · 2 incidents
EE WAS OPERATING A 992G CAT LOADER WHEN FRONT TIRE DROPPED IN HOLE CAUSING MACHINE TO SHIFT. EE COMPLAINED OF NECK PAIN TOOK HIM TO HOSPITAL. X-RAYS NEGATIVE. EE WENT ON VACATION AND R.T.W. HIS NEXT SCHEDULED SHIFT. HE CONTINUED TO WORK UNTIL 6-28-02, WHEN HE INFORMED HIS SUPERVISOR HIS DR. HAD TAKEN HIM OFF WORK.
WHILE ATTEMPTING TO DISMOUNT HIS MACK-600 SERVICE TRUCK EE TWISTED HIS LEFT KNEE.
2001 · 3 incidents
OPERATOR WAS LOADING COAL WHEN HIS LOADER DEVELOPED AN ENGINE FIRE. AS HE WAS ATTEMPTING TO DISMOUNT HE SLIPPED & FELL APPROXIMATELY 8' TO 10'.
EE WAS IN THE PROCESS OF WORKING ON THE STEERING OF A ROCK TRUCK. THIS INVOLVED EE CLIMBING DOWN IN THE TOP OF THE ENGINE. EE LOST HIS FOOTING AND FELL DOWN BETWEEN THE ENGINE AND FRAME OF THE TRUCK. PRELIMINARY DIAGNOSIS - TWISTED LEFT KNEE WITH SUSPECTED LIGAMENT DAMAGE.
EE STATED THAT AS HE WAS BEING LOADED BY 992C OPERATOR, OPERATOR DROPPED A ROCK INTO THE BED OF HIS ROCK TRUCK CAUSING A QUICK JERK TO HIS NECK AND RIGHT SHOULDER. EE FIRST DAY WORK WAS 406091 , AN MRI IS PENDING. PRELIMINARY DIAGNOSIS-MUSCLE SPRAIN.
2000 · 4 incidents
EE STATES: CLIMBING ON BIN. TORE LIGAMENT IN SHOULDER.
EE WAS CALLED FROM THE SHOT TO TRAM TO THE FILL WHERE THE TRUCKS WERE DUMPING TO PUSH THE FILL OVER. WHEN HE GOT TO THE FILL HE REPORTED THAT HE HAD RUN OVER A ROCK AND HURT HIS BACK. HE FINIS HED HIS SHIFT BUT DID NOT RETURN THE FOLLOWING DAY. PRELIMINARY DIAGNOSIS - LOWER BACK SPRAIN.
EE IN THE PROCESS OF BEING LOADED WHEN A 30-40 TON SECTION OF HIGHWALL FELL INTO THE BED OF THETRK RESULTING IN A PULLED MUSCLE IN HIS LOWER BACK
EE WAS IN THE PROCESS OF CLIMBING DOWN FROM HIS DOZER WHEN HE LOST HIS FOOTING AND FELL. SPRAINING HIS RIGHT KNEE, EE CONTINUED TO WORK UNTIL 5-1-00.