Owner of J&P equipment cleaning was working on a steam cleaning engine when one of his employees noticed that he was slumped over the engine. This is still under investgation by MSHA.
ICG Hazard, LLC: 2 recorded fatalities operator
Watch this operator
Email me when a new MSHA incident is filed at any ICG Hazard, LLC mine.
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2014 | 5.11 | 3.40 | 0.000 |
| 2013 | 0.33 | 0.33 | 0.000 |
| 2012 | 1.09 | 0.87 | 0.000 |
| 2011 | 1.44 | 0.57 | 0.000 |
| 2010 | 3.07 | 1.95 | 0.000 |
| 2009 | 3.08 | 2.15 | 0.000 |
| 2008 | 1.88 | 1.00 | 0.125 |
| 2007 | 3.55 | 2.63 | 0.000 |
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2014-03-17, 12 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- CONTINUOUS MINER OPERATOR834
- BULLDOZER OPERATOR383
- HIGHWALL DRILL OPERATOR307
Silica (quartz)
Last sampled: 2012-12-11, 13 years ago- CONTINUOUS MINER OPERATOR97
- BULLDOZER OPERATOR37
- HIGHWALL DRILL OPERATOR17
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2014-03-17, 12 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- BULLDOZER OPERATOR156
- HIGHLIFT OPERATOR/FRONT END LOADER111
- HIGHWALL DRILL OPERATOR111
ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 457 · 97%
- Stood as issued 12 · 3%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| KENT 2008-1295 | Settlement | Feldman | 2010 | $269K → $188K |
| KENT 2008-1447 | Settlement | Melick | 2010 | $217K → $155K |
| KENT 2009-960 | Prevail | 2014 | $138K → $70K | |
| KENT 2009-69 | Settlement | 2011 | $137K → $96K | |
| KENT 2009-951 | Prevail | Miller | 2012 | $132K → $109K |
| KENT 2008-1086 | Settlement | Barbour | 2009 | $127K → $95K |
Top causes
- MACHINERY 1 fatality · 20 non-fatal
- OTHER 1 fatality · 1 non-fatal
- HANDLING OF MATERIALS 42 non-fatal
- FALL OF ROOF OR BACK 41 non-fatal
- HANDTOOLS (NONPOWERED) 32 non-fatal
- SLIP OR FALL OF PERSON 24 non-fatal
Incident timeline
Mines on record
- Thunder Ridge KY
- Kentucky River Loading KY
- East Mac & Nellie KY
- Flint Ridge Mine #2 KY
- Rowdy Gap Mine KY
- Bearville KY
- P-1 Flint Ridge KY
- Tip Top Mine KY
- Middle Fork Surface KY
- Flint Ridge Mine KY
- #1 KY
- Flint Ridge Mine KY
- Vicco Mine KY
- County Line Mine KY
Fatalities under this operator
2 recordedEmployee was pushing material (shot rock) from a break down shot, when his dozer went over edge of highwall. At this time accident is under investigation by MSHA and OMSL.
Where ICG Hazard, LLC stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.