Grabbed a chain to bind a piece of equipment down and felt something pull in his back. did not report accident until 9/28/05
#24: 36 MSHA citations Coal
CAM Mining LLC
· Underground
Controlled by
Rhino Resource Partners LP
Pikeville,
Pike County,
KY
·
Abandoned
MSHA Mine ID: 1518838
#24 has $3K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at #24.
- Fatalities
- 0
- Total incidents
- 5
- Years on record
- 2005
- Latest incident
- Sep 2005
Compliance record
MSHA citations since 2005
36
citations
13
significant & substantial
$2,681
proposed penalties
$2,681
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2005
17
inspections on record
298
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 298 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
#24 has $3K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$3K
proposed penalties
$3K
current assessed
$3K
paid to date
$0
outstanding
35 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2006-01-12.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.37.1%
significant & substantial
0.0%
high negligence or reckless
37.1%
reasonably likely or greater
0.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 100.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
MSHA sampling at #24 shows 96% of 71 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2005-09-17, 20 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.96%
within 1.5 mg/m3
71
samples
3.06
dust max (mg/m3)
39 samples taken by MSHA inspectors, 32 by the operator.
Most-sampled occupations
- CONTINUOUS MINER OPERATOR36
- SHUTTLE CAR OPERATOR (STANDARD SIDE)9
- ROOF BOLTER (TWIN HEAD) (RETURN SIDE)5
Silica (quartz)
Last sampled: 2005-06-22, 21 years ago6.3
silica avg (%)
2
samples
7.0
silica max (%)
Most-sampled occupations
- CONTINUOUS MINER OPERATOR2
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2005-05-24, 21 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.20%
over PEL
10
samples
Most-sampled occupations
- CONTINUOUS MINER OPERATOR2
- ROOF BOLTER (TWIN HEAD) (INTAKE SIDE)2
- ROOF BOLTER (TWIN HEAD) (RETURN SIDE)2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Ownership history
- CAM-Kentucky, LLC 2005 to 2005
- CAM Mining LLC 2006 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2006 | 0 | |
| 2005 | 29 | 177,208 |
Source: MSHA quarterly employment and production, updated weekly.
#24 sits in Pike County, Kentucky, where the Census mining category is 5.1% of county employment.
Local economic context
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.Pike County, Kentucky · Population 57,466
5.1%
Mining share of county employment
$42,179
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.Citations per million employee-hours, as reported to MSHA
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2006 Q2 | 0 | 0 | 0 | |
| 2006 Q1 | 0 | 1 | 0 | |
| 2005 Q4 | 0 | 0 | 0 | |
| 2005 Q3 | 26,969 | 12 | 2 | 445.0 |
| 2005 Q2 | 22,298 | 15 | 7 | 672.7 |
No fatalities recorded at this mine.
Reportable incidents
5 on file2005 · 5 incidents
September 26, 2005
KY · Coal
front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator
HANDLING OF MATERIALS
CAM-Kentucky, LLC · Over-exertion (Not Elsewhere Classified)
CAM-Kentucky, LLC · Accident type, without injuries
A roof fall occurred 8 breaks inside in the belt entry. It measured approx. 30'long, 19'wide and 8'thick.
CAM-Kentucky, LLC · Accident type, without injuries
A roof fall occurred 1 break outby spad 194 and it measured approximately 80' long, 80' wide and 4 to 4.5' thick.
CAM-Kentucky, LLC · Accident type, without injuries
Roof fall 25 feet inby spad 71 - 4 ft thick 18 feet wide and 60 feet long.
CAM-Kentucky, LLC · Accident type, without injuries
Roof fall at spad 58 4 feet thick, 18 feet wide and 60 feet long.