Employee was working on tilt jack on D11N - as he was pushing in the pin - left pinkie finger was caught and cut bad.
Remining No 1: 94 MSHA citations Coal
Remining No 1 has $19K in proposed MSHA penalties and $583 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Remining No 1.
- Fatalities
- 0
- Total incidents
- 35
- Years on record
- 2001–2005
- Latest incident
- Sep 2005
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Remining No 1 has $19K in proposed MSHA penalties and $583 outstanding across 0 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.MSHA sampling at Remining No 1 shows 100% of 45 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2005-11-30, 20 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- HIGHLIFT OPERATOR/FRONT END LOADER14
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE10
- BULLDOZER OPERATOR9
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2005-01-12, 21 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- HIGHLIFT OPERATOR/FRONT END LOADER4
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE4
- BULLDOZER OPERATOR3
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2005 | 100% | 15 |
| 2004 | 100% | 8 |
| 2003 | 100% | 10 |
| 2002 | 100% | 12 |
| Year | over PEL | samples |
|---|---|---|
| 2005 | 0% | 4 |
| 2004 | 0% | 5 |
| 2003 | 0% | 5 |
Remining No 1 recorded 19.80 reportable injury cases per 100 full-time workers in 2005.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2005 * | 19.80 | 4.40 | 0.000 |
| 2004 | 3.71 | 3.71 | 0.000 |
| 2003 | 8.83 | 7.36 | 0.000 |
| 2002 | 18.64 | 10.04 | 0.000 |
- Little Boyd Coal Company Inc 2000 to 2004
- TMP Enterprises, LLC 2004 to 2005
- Eagle Creek Mining LLC 2005 to 2009
- CAM Mining LLC 2009 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2010 | 0 | |
| 2009 | 0 | |
| 2008 | 0 | |
| 2007 | 2 | |
| 2006 | 8 | 21,128 |
| 2005 | 32 | 333,985 |
| 2004 | 44 | 358,731 |
| 2003 | 58 | 512,994 |
| 2002 | 52 | 467,431 |
| 2001 | 44 | 122,069 |
Remining No 1 sits in Mingo County, West Virginia, where the Census mining category is 15.0% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2010 Q3 | 0 | 0 | 0 | |
| 2010 Q2 | 0 | 1 | 0 | |
| 2010 Q1 | 0 | 0 | 0 | |
| 2009 Q4 | 0 | 0 | 0 | |
| 2009 Q3 | 0 | 1 | 1 | |
| 2008 Q2 | 0 | 0 | 0 | |
| 2008 Q1 | 0 | 0 | 0 | |
| 2007 Q4 | 0 | 0 | 0 |
Show 25 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2007 Q3 | 195 | 0 | 0 | 0.0 |
| 2007 Q2 | 455 | 1 | 0 | 2197.8 |
| 2007 Q1 | 743 | 0 | 0 | 0.0 |
| 2006 Q4 | 1,248 | 0 | 0 | 0.0 |
| 2006 Q3 | 2,283 | 0 | 0 | 0.0 |
| 2006 Q2 | 3,571 | 0 | 0 | 0.0 |
| 2006 Q1 | 5,868 | 0 | 0 | 0.0 |
| 2005 Q4 | 20,540 | 5 | 1 | 243.4 |
| 2005 Q3 | 23,746 | 7 | 6 | 294.8 |
| 2005 Q2 | 23,225 | 10 | 8 | 430.6 |
| 2005 Q1 | 23,417 | 16 | 16 | 683.3 |
| 2004 Q4 | 26,171 | 0 | 0 | 0.0 |
| 2004 Q3 | 26,019 | 11 | 11 | 422.8 |
| 2004 Q2 | 20,900 | 0 | 0 | 0.0 |
| 2004 Q1 | 34,604 | 3 | 2 | 86.7 |
| 2003 Q4 | 33,120 | 0 | 0 | 0.0 |
| 2003 Q3 | 33,996 | 18 | 16 | 529.5 |
| 2003 Q2 | 33,473 | 4 | 2 | 119.5 |
| 2003 Q1 | 35,263 | 3 | 3 | 85.1 |
| 2002 Q4 | 38,792 | 0 | 0 | 0.0 |
| 2002 Q3 | 32,234 | 1 | 1 | 31.0 |
| 2002 Q2 | 34,582 | 0 | 0 | 0.0 |
| 2002 Q1 | 33,846 | 0 | 0 | 0.0 |
| 2001 Q4 | 28,294 | 0 | 0 | 0.0 |
| 2001 Q3 | 12,764 | 0 | 0 | 0.0 |
Reportable incidents
35 on file2005 · 10 incidents
EMPLOYEE WAS DRIVING ROCK TRUCK, THE TRUCK WAS BEING LOADED & SHOOK THE DRIVER HARD. EMPLOYEE DID NOT INFORM THE FOREMAN OF THE ACCIDENT UNTIL 9/27/05, THE DAY AFTER HE WENT TO THE DR.
Employee was operating a dozer (11R) - backed over rock - said at quit time his back was hurting him - went to hospital.
EMPLOYEE WAS CUTTING WITH A TORCH. SLAG HIT EYE. EMPLOYEE WAS WEARING SAFETY GLASSES.
EE was pushing dirt on a d9 dozer when dirt built up so high and fell in-busting the window -fell in ee
MECHANIC WAS WORKING ON D11N - HIT HIS FINGER WITH HAMMER. WENT TO ER - HAD STITCHES.
EE WAS DRILLING OUT A TERMINAL (BATTERY) WHEN THE DRILL BIT WENT THROUGH AND CAUGHT HIS FINGER. LACERATION TO LEFT POINTER FINGER.
PIECE OF STEEL FELL OUT OF MASK ON DRILL. EE AND OTHER EE TOOK SERVICE TRUCK AND HOOKED BOOM TO STEEL TRYING TO PUT IT BACK IN ROCK. BOOM STARTED SWINGING AND STEEL STRUCK BOTH EE
PIECE OF STEEL FELL FROM MASK ON DRILL. EE AND OTHER EE HOOKED BOOM ON SERVICE TRACK TO STEEL TRYING TO PUT STEEL BACK IN ROCK. BOOM STARTED SWINGING AND STRUCK BOTH EE
EE WAS OPERATING DOZER AND FAILED TO SEE ROCK IN PARKING LOT, BACKED OVER THE ROCK, PULLED MUSCLES IN BACK.
2004 · 3 incidents
TRUCK WAS BACKING UP DUMP ROAD AND EE DID NOT CHECK OFFSIDE MIRROR, BACKED THROUGH THE BERM AND OVER HILL.
STEPPED OFF TRUCK AND SPRAINED ANKLE.
EE WAS LOADING A DRILL ONTO LOWBOY. DRILL SLIPPED AND FINGER WAS CAUGHT BETWEEN METAL ON DRILL AND LOWBOY.
2003 · 7 incidents
EE WAS OPENING HOOD TO TURN HEATER VALVES WHEN HE EXPERIENCED PAIN IN HIS BACK & LEFT LEG. EE HAS A HISTORY OF BACK PROBLEMS. EE SAID HE GOT HURT IN PREVIOUS JOB.
EMPLOYEE MADE KNOWN OVER THE TWO-WAY RADIO THAT HE WAS GOING TO STEP OUT OF THE CAB OF HIS ROCK TRUCK TO URINATE. HE WAS FOUND MOMENTS LATER SITTING ON THE GROUND COMPLAINING OF BREATHING PROB LEMS. DURING THE PATIENT ASSESSMENT HE SAID HE HD STUMBLED AND FELL OFF THE FRONT OF THE ROCK TRUCK.
EE WAS ATTEMPTING TO GREASE A TIW ROD END & HE HAD CO-WORKER TO STEER FRONT WHEELS BACK & FORTH & SOMEHOW HE GOT HIS HEAD PINNED BETWEEN THE TIE ROD & THE LEFT FRONT WHEEL.
COAL TRUCK POPPED OUT OF GEAR, TRUCK STARTED ROLLING BACKWARDS, EMPLOYEE JUMPED OUT OF TRUCK.
DISMOUNTING DOZER AFTER SERVICING IT, HE TRIPPED ON TRACK AND FELL TO THE GROUND LANDING ON HIS HIP.
WENT TO TRIALER TO GET TIME CARDS AND SLIPPED ON SNOW AND ICE. HE FELL ON ICE AND HAD SEVERE PAIN IN BACK.
EMPLOYEE WAS LOADING TIRE IN TRUCK - PULLED BACK.
2002 · 13 incidents
EE LOOKED UP TO SEE ROCK COMING OFF WALL THREW UP HAND AUTOMATICALLY TO PROTECT HIMSELF- ROCK HIT HAND.
GET OUT OF LOADER TO CHECK OIL-FOOT SLIPPED ON OPERATOR FELL ABOUT 6' FROM TOP.
CLIMBING ON BUMPER WITH MUDDY FEET, HE SLID OFF AND FELL TO THE GROUND. HEAD AND SHOULDERS FELL ON TRAILER HITCH - RIGHT SIDE OF RIBS.
THE MECHANIC & OPERATOR OF THE DOZER WAS CHANGING A HOSE. WHEN THEY LOOSENED THE BOLTS, OIL SPRAYED INTO THE OPERATORS EYE.
EE WAS RIDING IN THE PICKUP-IN THE BACK OF TRUCK UP THE HILL. TRUCK STARTED THROUGH CURVE IN ONE LANE, MEET A COAL TRUCK COMING DOWN IN THE CRUVE, DRIVER OF PICKUP SLAMMED ON BRAKES AND THREW EE FORWARD IN BED OF TRUCK.
BURNT EYES WELDING.
WAS LOADING HOLES. AS PRIMER WAS BEING PUT INTO HOLE BOOM ON LOADING TRUCK HAD BOLTS IN SWIVEL GIVE WAY & BREAK. BOOM FELL ON VICTIM WHO WAS LOADING HOLE.
DRIVER OF COAL TRUCK BACKED UP ON BERM AND TURNED TRUCK OVER ON PASSENGER SIDE. DRIVER HAD A CUT OVER LEFT EYE AND SOME NECK PAIN. TOOK EMT TO SITE AND CALLED AMBULANCE.
PULLING A CHAIN AND SLIPPED ON THE LOWBOY, PULLED LOWER BACK.
WAS LOOKING FOR A SERIAL NUMBER ON THE GENERATOR, INSIDE OF THE STEEL BUILDING, DIDN'T HAVE A LIGHT SO EE REMOVED HARD HAT AND BENT OVER WRITING THE NUMBER DOWN THEN I RAISED UP BEFORE PUTTING HARD HAT ON BACK ON MY MEAD AND HIT MY HEAD ON TOP OF THE DOOR FRAME.
IT WAS RAINING VERY HARD AND EE WAS COMING OUT OF DOZER AND FELL FROM STEPS.
EE WAS CUTTING TREES OVER HIGHWALL-LOST FOOTING AND FELL TO ROCKS BELOW.
EE THOUGHT BELT WAS BROKE. WENT TO CHECK BELT AND IT WAS OK. LET EXCAVATOR COOL AND UNSCREWED RADIATOR CAP. EE WAS BURNT WITH STEAM ON RIGHT HAND.
2001 · 2 incidents
PUTTING DUST COLLECTOR HOSE ON DRILL AND REACHED FOR WRENCH, PULLED DUST INTO EYES.
WAS GETTING READY TO MOUNT DOZER WHEN HE STEPPED UP ON PUSH ARM. HIS FOOTING SLIPPED AND HE FELL ACROSS TILT JACK.