Mining Incidents

Acushnet Quarry: 106 MSHA citations Metal/Non-Metal

P J Keating Company · Surface
Controlled by CRH PLC
Fitchburg, Bristol County, MA  ·  Temporarily Idled
MSHA Mine ID: 1900046

Acushnet Quarry has $18K in proposed MSHA penalties and $0 outstanding across 7 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Acushnet Quarry.

Fatalities
0
Total incidents
57
Years on record
1985–2021
Latest incident
Mar 2021
Compliance record
MSHA citations since 2000
106
citations
19
significant & substantial
$18,197
proposed penalties
$17,479
paid to date
96% of proposed penalties paid to date, a $718 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
59
inspections on record
1,223
inspection hours
8.7
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
106 citations across 1,223 inspection hours.
Source: MSHA inspections data, updated weekly.

Acushnet Quarry has $18K in proposed MSHA penalties and $0 outstanding across 7 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$18K
proposed penalties
$17K
current assessed
$17K
paid to date
$0
outstanding
106 assessments are final orders; 7 contested dockets.
Of $2K in penalties contested before the Commission, $805 was upheld in final decisions.
As of the most recent assessment on 2022-01-20.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
17.9%
significant & substantial
1.9%
high negligence or reckless
18.9%
reasonably likely or greater
62.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 21.7% low, 76.4% moderate, 1.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
9 citations taken to the federal commission · 8% of citations on record
  • Settled 7 · 78%
  • Vacated or withdrawn 2 · 22%
33%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 3 decided S&S contests · industry: 79%
52%
Penalty reduction in decided contests
$2K proposed, $750 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2016-03-27.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
YORK 2009-168M Settlement Lesnick 2010 $408 → $200
YORK 2009-100M Settlement Lesnick 2011 $334 → $150
YORK 2010-287M Settlement Lesnick 2011 $308 → $100
YORK 2015-0137 Settlement Moran 2016 $300 → $200
YORK20000080M Settlement Zielinski 2001 $173 → $55
YORK 2011-256M Withdrawal Koutras 2013 $100 → $0
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2020-09-09, 5 years ago
0%
of limit-tested samples over the exposure limit
43
samples
19
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg22
  • Quartz, respirable, >1% Qtz9
  • Arsenic fumes6
  • Beryllium fumes6
Show the individual readings (100)
Date Contaminant Concentration Limit Conc / limit Occupation
2020-09-09 Quartz, respirable, >1% Qtz 0.22 0.52 0.42 Utility Man
2020-09-09 Respirable dust, <.1mg 0 Truck Driver
2020-09-09 Respirable dust, <.1mg 0 Front-end Loader Operator
2019-05-01 Respirable dust, <.1mg 0 Laborer, Bullgang
2019-05-01 Quartz, respirable, >1% Qtz 0.21 Laborer, Bullgang
2019-05-01 Quartz, respirable, >1% Qtz 0.26 Laborer, Bullgang
2019-02-12 Magnesium oxide fumes 0.1 20 0.01 Welder, etc.
2019-02-12 Lead fumes 0 450 0.00 Welder, etc.
2019-02-12 Iron oxide fumes 0.35 20 0.02 Welder, etc.
2019-02-12 Copper fumes 0 300 0.00 Welder, etc.
2019-02-12 Cobalt fumes 0 300 0.00 Welder, etc.
2019-02-12 Chromium, insoluble 0 3 0.00 Welder, etc.
2019-02-12 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2019-02-12 Arsenic fumes 0 1500 0.00 Welder, etc.
2019-02-12 Beryllium fumes 0 6 0.00 Welder, etc.
2019-02-12 Zinc oxide fumes 0.06 10 0.01 Welder, etc.
2019-02-12 Vanadium fumes 0 50 0.00 Welder, etc.
2019-02-12 Nickel fumes 0 3 0.00 Welder, etc.
2019-02-12 Molybdenum fumes 0 20 0.00 Welder, etc.
2019-02-12 Manganese fumes 0.19 5 0.04 Welder, etc.
2016-08-10 Quartz, respirable, >1% Qtz 0.12 1.14 0.11 Laborer, Bullgang
2016-08-10 Respirable dust, <.1mg 0 Laborer, Bullgang
2016-08-10 Respirable dust, <.1mg 0 Backhoe Operator
2015-06-25 Quartz, respirable, >1% Qtz 0.23 0.66 0.35 Drill Operator, Rotary
2015-06-25 Respirable dust, <.1mg 0 Crusher Oper/Worker
2015-06-25 Quartz, respirable, >1% Qtz 0.15 0.31 0.48 Truck Driver
2013-05-08 Respirable dust, <.1mg 0 Front-end Loader Operator
2013-05-08 Respirable dust, <.1mg 0 Truck Driver
2013-05-08 Respirable dust, <.1mg 0 Truck Driver
2013-05-08 Respirable dust, <.1mg 0 Truck Driver
2013-05-07 Quartz, respirable, >1% Qtz 0.27 0.85 0.32 Laborer, Bullgang
2013-05-07 Respirable dust, <.1mg 0 Laborer, Bullgang
2013-05-07 Quartz, respirable, >1% Qtz 0.32 0.73 0.44 Laborer, Bullgang
2010-04-06 Respirable dust, <.1mg 0 Front-end Loader Operator
2010-04-06 Respirable dust, <.1mg 0 Crusher Oper/Worker
2010-04-06 Respirable dust, <.1mg 0 Truck Driver
2010-04-06 Respirable dust, <.1mg 0 Truck Driver
2010-04-06 Respirable dust, <.1mg 0 Drill Operator, Rotary
2009-05-14 Respirable dust, <.1mg 0 Laborer, Bullgang
2009-05-14 Quartz, respirable, >1% Qtz 0.22 1.46 0.15 Laborer, Bullgang
2009-05-14 Respirable dust, <.1mg 0 Truck Driver
2009-05-14 Respirable dust, <.1mg 0 Truck Driver
2007-01-18 Molybdenum fumes 0 10 0.00 Welder, etc.
2007-01-18 Arsenic fumes 0 500 0.00 Welder, etc.
2007-01-18 Beryllium fumes 0 2 0.00 Welder, etc.
2007-01-18 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2007-01-18 Chromium, insoluble 0 1 0.00 Welder, etc.
2007-01-18 Cobalt fumes 0 100 0.00 Welder, etc.
2007-01-18 Copper fumes 0.61 100 0.01 Welder, etc.
2007-01-18 Iron oxide fumes 0.11 10 0.01 Welder, etc.
2007-01-18 Lead fumes 0.25 150 0.00 Welder, etc.
2007-01-18 Magnesium oxide fumes 0.01 10 0.00 Welder, etc.
2007-01-18 Manganese fumes 0.02 5 0.00 Welder, etc.
2007-01-18 Molybdenum fumes 0 10 0.00 Welder, etc.
2007-01-18 Nickel fumes 0 1 0.00 Welder, etc.
2007-01-18 Vanadium fumes 0 50 0.00 Welder, etc.
2007-01-18 Zinc oxide fumes 0 5 0.00 Welder, etc.
2007-01-18 Arsenic fumes 0 500 0.00 Welder, etc.
2007-01-18 Beryllium fumes 0 2 0.00 Welder, etc.
2007-01-18 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2007-01-18 Chromium, insoluble 0 1 0.00 Welder, etc.
2007-01-18 Cobalt fumes 0 100 0.00 Welder, etc.
2007-01-18 Copper fumes 0.61 100 0.01 Welder, etc.
2007-01-18 Iron oxide fumes 0.11 10 0.01 Welder, etc.
2007-01-18 Lead fumes 0.25 150 0.00 Welder, etc.
2007-01-18 Magnesium oxide fumes 0 10 0.00 Welder, etc.
2007-01-18 Manganese fumes 0.01 5 0.00 Welder, etc.
2007-01-18 Nickel fumes 0 1 0.00 Welder, etc.
2007-01-18 Vanadium fumes 0 50 0.00 Welder, etc.
2007-01-18 Zinc oxide fumes 0 5 0.00 Welder, etc.
2005-02-25 Copper fumes 0 300 0.00 Welder, etc.
2005-02-25 Chromium, insoluble 0 3 0.00 Welder, etc.
2005-02-25 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2005-02-25 Beryllium fumes 0 6 0.00 Welder, etc.
2005-02-25 Arsenic fumes 0 1500 0.00 Welder, etc.
2005-02-25 Lead fumes 0 450 0.00 Welder, etc.
2005-02-25 Iron oxide fumes 0 20 0.00 Welder, etc.
2005-02-25 Cobalt fumes 0 300 0.00 Welder, etc.
2005-02-25 Aluminum oxide fumes 0 20 0.00 Welder, etc.
2005-02-25 Iron oxide fumes 0 10 0.00 Welder, etc.
2005-02-25 Copper fumes 0 100 0.00 Welder, etc.
2005-02-25 Cobalt fumes 0 100 0.00 Welder, etc.
2005-02-25 Chromium, insoluble 0 1 0.00 Welder, etc.
2005-02-25 Cadmium oxide fumes 0 100 0.00 Welder, etc.
2005-02-25 Beryllium fumes 0 2 0.00 Welder, etc.
2005-02-25 Arsenic fumes 0 500 0.00 Welder, etc.
2005-02-25 Aluminum oxide fumes 0 10 0.00 Welder, etc.
2005-02-25 Zinc oxide fumes 0 10 0.00 Welder, etc.
2005-02-25 Vanadium fumes 0 50 0.00 Welder, etc.
2005-02-25 Titanium dioxide fumes 0 20 0.00 Welder, etc.
2005-02-25 Nickel fumes 0 3 0.00 Welder, etc.
2005-02-25 Molybdenum fumes 0 20 0.00 Welder, etc.
2005-02-25 Manganese fumes 0.01 5 0.00 Welder, etc.
2005-02-25 Magnesium oxide fumes 0 20 0.00 Welder, etc.
2005-02-25 Lead fumes 0 150 0.00 Welder, etc.
2005-02-25 Magnesium oxide fumes 0 10 0.00 Welder, etc.
2005-02-25 Manganese fumes 0 5 0.00 Welder, etc.
2005-02-25 Molybdenum fumes 0 10 0.00 Welder, etc.
2005-02-25 Nickel fumes 0 1 0.00 Welder, etc.
2005-02-25 Titanium dioxide fumes 0 10 0.00 Welder, etc.
Showing 100 of 121 laboratory readings: every over-limit reading, then the most recent. MSHA reads one air sample several times, so readings outnumber the samples counted above. The full set is in MSHA's Personal Health Samples file.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Acushnet Quarry recorded 8.60 reportable injury cases per 100 full-time workers in 2021.

Injury rate, 2021
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
8.60
total case rate
8.60
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.87 and the all-US-mining average was 2.19 cases per 100 workers.
In Massachusetts, metal and nonmetal mining averaged 1.17 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2021 * 8.60 8.60 0.000
2020 * 10.32 0.00 0.000
2019 * 2.79 0.00 0.000
2018 * 0.00 0.00 0.000
2017 * 3.56 0.00 0.000
2016 * 9.76 0.00 0.000
2015 * 7.96 0.00 0.000
2014 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Warren Brothers Company Inc 1950 to 1979
  2. Tilcon Capaldi Inc 1979 to 1996
  3. P J Keating Company 1996 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 9
2025 3
2024 2
2023 5
2022 9
2021 14
2020 26
2019 32
2018 29
2017 34
2016 33
2015 31
2014 28
2013 26
2012 24
2011 26
2010 24
2009 26
2008 26
2007 30
2006 30
2005 28
2004 25
2003 21
2002 16
2001 25
2000 25
Source: MSHA quarterly employment and production, updated weekly.

Acushnet Quarry sits in Bristol County, Massachusetts, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Bristol County, Massachusetts · Population 578,436
0.0%
Mining share of county employment
$84,198
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 2,706 0 0 0.0
2026 Q1 904 0 0 0.0
2025 Q4 1,844 0 0 0.0
2025 Q3 563 0 0 0.0
2025 Q2 546 0 0 0.0
2025 Q1 632 0 0 0.0
2024 Q4 670 0 0 0.0
2024 Q3 554 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 601 0 0 0.0
2024 Q1 628 0 0 0.0
2023 Q4 784 0 0 0.0
2023 Q3 2,311 0 0 0.0
2023 Q2 1,312 0 0 0.0
2023 Q1 1,617 0 0 0.0
2022 Q4 6,558 0 0 0.0
2022 Q3 6,246 0 0 0.0
2022 Q2 4,589 0 0 0.0
2022 Q1 2,086 1 0 479.4
2021 Q4 5,686 0 0 0.0
2021 Q3 4,336 0 0 0.0
2021 Q2 6,780 0 0 0.0
2021 Q1 6,454 1 0 154.9
2020 Q4 15,329 0 0 0.0
2020 Q3 16,417 2 0 121.8
2020 Q2 15,944 0 0 0.0
2020 Q1 10,423 1 0 95.9
2019 Q4 17,806 0 0 0.0
2019 Q3 23,208 0 0 0.0
2019 Q2 17,076 5 1 292.8
2019 Q1 13,568 3 1 221.1
2018 Q4 15,022 0 0 0.0
2018 Q3 17,007 0 0 0.0
2018 Q2 15,671 2 0 127.6
2018 Q1 8,555 1 0 116.9
2017 Q4 12,796 0 0 0.0
2017 Q3 14,937 4 2 267.8
2017 Q2 17,942 0 0 0.0
2017 Q1 10,442 2 0 191.5
2016 Q4 15,784 0 0 0.0
2016 Q3 17,122 2 0 116.8
2016 Q2 18,613 0 0 0.0
2016 Q1 9,977 1 0 100.2
2015 Q4 10,555 0 0 0.0
2015 Q3 16,816 0 0 0.0
2015 Q2 16,151 3 0 185.7
2015 Q1 6,743 3 1 444.9
2014 Q4 13,206 0 0 0.0
2014 Q3 14,152 0 0 0.0
2014 Q2 13,094 0 0 0.0
2014 Q1 4,312 1 1 231.9
2013 Q4 8,346 0 0 0.0
2013 Q3 12,667 0 0 0.0
2013 Q2 12,517 4 1 319.6
2013 Q1 2,489 0 0 0.0
2012 Q4 7,624 2 0 262.3
2012 Q3 8,984 3 0 333.9
2012 Q2 10,353 0 0 0.0
2012 Q1 4,290 0 0 0.0
2011 Q4 6,936 0 0 0.0
2011 Q3 10,895 0 0 0.0
2011 Q2 10,579 2 0 189.1
2011 Q1 2,791 1 0 358.3
2010 Q4 9,770 0 0 0.0
2010 Q3 10,763 0 0 0.0
2010 Q2 9,734 0 0 0.0
2010 Q1 2,076 1 0 481.7
2009 Q4 10,320 1 1 96.9
2009 Q3 12,195 0 0 0.0
2009 Q2 11,892 6 0 504.5
2009 Q1 2,048 3 1 1464.8
2008 Q4 10,018 0 0 0.0
2008 Q3 11,697 0 0 0.0
2008 Q2 12,960 0 0 0.0
2008 Q1 3,121 0 0 0.0
2007 Q4 9,022 2 0 221.7
2007 Q3 15,716 0 0 0.0
2007 Q2 14,529 0 0 0.0
2007 Q1 8,600 0 0 0.0
2006 Q4 11,321 0 0 0.0
2006 Q3 14,879 0 0 0.0
2006 Q2 13,137 4 0 304.5
2006 Q1 8,849 4 1 452.0
2005 Q4 13,269 0 0 0.0
2005 Q3 12,898 0 0 0.0
2005 Q2 14,392 0 0 0.0
2005 Q1 4,988 2 0 401.0
2004 Q4 12,498 0 0 0.0
2004 Q3 14,470 2 0 138.2
2004 Q2 12,590 0 0 0.0
2004 Q1 5,622 3 0 533.6
2003 Q4 9,962 0 0 0.0
2003 Q3 9,618 0 0 0.0
2003 Q2 8,687 0 0 0.0
2003 Q1 4,391 0 0 0.0
2002 Q4 8,825 0 0 0.0
2002 Q3 10,285 0 0 0.0
2002 Q2 8,309 0 0 0.0
2002 Q1 4,597 0 0 0.0
2001 Q4 10,903 6 2 550.3
2001 Q3 17,297 0 0 0.0
2001 Q2 11,057 0 0 0.0
2001 Q1 8,168 3 1 367.3
2000 Q4 13,595 0 0 0.0
2000 Q3 16,230 0 0 0.0
2000 Q2 15,287 3 0 196.2
2000 Q1 5,989 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

57 on file

2021 · 1 incident

March 3, 2021 MA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
P J Keating Company · Struck against a moving object

While driving to load out customer at 3" minus, operator struck a frozen wheel tire rut and bounced in seat sharply. This caused a low back injury.

2020 · 3 incidents

November 20, 2020 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman DISORDERS (REPEATED TRAUMA)
P J Keating Company · (Not Elsewhere Classified)

Employee had three hearing tests; original, a re-test to confirm original result, and a follow up. All tests came back differently. The last test did show a 30 dB shift at 3K.

February 3, 2020 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
P J Keating Company · Fall from ladders

The injured employee was working inside the #2 chute replacing liners. Employee was working from a 16' extension ladder and went to reach to the right for a screw driver when the ladder the employee was working from slid to the left. The employee fell approx. 2 feet to a ledge and landed on tail bone.

January 29, 2020 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
P J Keating Company · Struck by falling object

The injured employee was replacing lines on the primary crusher when a come-a-long that was being used to hold the liners in place needed to be relocated. The employee climbed a ladder to unhook the to of the come-a-long and lost grip. This caused the come-a-long to strike the employee in the forehead just above the left eye. The laceration required 5 stitches to close.

2019 · 1 incident

March 27, 2019 MA · Metal/Non-Metal welder (shop) HANDLING OF MATERIALS
P J Keating Company · Over-exertion (Not Elsewhere Classified)

At the end of shift, injured employee was descending the primary crusher stairs when ee felt a pain in lower back. Employee went home and when ee returned for next shift a fellow worker informed the site manager that the injured employee was not doing too well. Employee was taken to an occupational clinic for evaluation and was prescribed medication.

2017 · 1 incident

May 15, 2017 MA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
P J Keating Company · Struck against a moving object

The employee was operating the loader in the plant when the bucket dropped suddenly stopping the loader short, which propelled employee's body forward, causing muscle sprains.

2016 · 3 incidents

December 21, 2016 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
P J Keating Company · Struck by falling object

Employee was looking up towards a conveyor when a small piece of ice fell down, hitting employee in the face, pushing the safety glasses into eyelid, causing an ocular contusion.

June 4, 2016 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
P J Keating Company · Struck by... (Not Elsewhere Classified)

Employee was hammering a roller into place when EE missed target and hit hand.

May 18, 2016 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman DISORDERS (REPEATED TRAUMA)
P J Keating Company · (Not Elsewhere Classified)

Employee experienced a significant change in hearing levels from previous year when hearing testing was performed on May 18, 2016.

2015 · 2 incidents

August 11, 2015 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
P J Keating Company · Fall onto or against objects

Employee was on a catwalk attempting to change a roller on one of the conveyors. As he squatted down and leaned to reach for the roller under the conveyor belt, his back foot slipped and his body dropped. As he fell, his mouth hit a metal railing causing damage to his teeth.

April 23, 2015 MA · Metal/Non-Metal outside foreman, leadman DISORDERS (REPEATED TRAUMA)
P J Keating Company · (Not Elsewhere Classified)

Employee experienced a significant change in hearing levels from previous year when hearing testing was performed on April 15, 2015

2013 · 1 incident

July 1, 2013 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
P J Keating Company · Caught in, under or between a moving and a stationary object

Cleaning up around C7 Tail pulley and caught right hand pinky on guard causing a cut.

2010 · 2 incidents

June 7, 2010 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
P J Keating Company · Struck by... (Not Elsewhere Classified)

Employee repairing C-12 belt which was sowing high amps. Employee used 10' pole to push apron back in place while conveyor was still running. Pole got caught in belting and caused pole to strike employee right side rib causing a contusion

February 25, 2010 MA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
P J Keating Company · Struck by... (Not Elsewhere Classified)

EE fitting 8" steel pipe to 8" plastic/rubber hose for pump. Hammering tapping in 8" steel pipe when hammer slipped causing abrasion and contusion to left hand index finger.

2009 · 1 incident

August 17, 2009 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman OTHER
P J Keating Company · Absorption of radiations, caustics, toxic and noxious substances

Employee while performing his welding task was stung by mosquitos causing swelling to arm/hand dx cellulitus. Treated with antibiotics / medrolcose pak for pain and swelling.

2008 · 2 incidents

June 30, 2008 MA · Metal/Non-Metal quality control technician, laboratory technician, laboratory assistant HANDTOOLS (NONPOWERED)
P J Keating Company · Struck by... (Not Elsewhere Classified)

Employee states he was cutting banding on a bundle of stakes, when the exacto raxor knife slipped, resulting in laceration to left thumb. Six stitches to close. Modified duty til 7/3/08.

April 8, 2008 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman OTHER
P J Keating Company · (Not Elsewhere Classified)

Empl failed annual audiogram test. Audiologist eval 4/8/08. Audiologist required MRI 4/10/08 & reval end of May. Not recommend for hearing aid. Eval to factor was age, genetics vs environmental reason for loss of hearing. No loss time or restricted duty.

2007 · 3 incidents

November 21, 2007 MA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
P J Keating Company · Over-exertion (Not Elsewhere Classified)

Employee states hurt elbow 2 weeks ago and now. wants it. checked out. States injury occurred while washing truck windows.

November 7, 2007 MA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
P J Keating Company · Struck against a moving object

Operation 990 loader machine hit knot operation jarred forward hit elbow right.

September 5, 2007 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
P J Keating Company · Struck against stationary object

Removing liner from chute, bolt broke off. Employee hit right elbow on angle rod.

2006 · 1 incident

2004 · 1 incident

June 21, 2004 MA · Metal/Non-Metal welder (shop) SLIP OR FALL OF PERSON
P J Keating Company · Fall from machine

EMPLOYEE HELPING DRIVER TO FIX BACKUP ALARM, MISSED STEP WHEN CLIMBING OUT OF TRUCK. FELL ON TAILBONE LOWER BACK.

2003 · 1 incident

September 25, 2003 MA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator STEPPING OR KNEELING ON OBJECT
P J Keating Company · Struck against stationary object

EE WENT TO SHUT OFF CONVEYOR / STEPPED ON PIECE OF WIRE -PUNCTURE TO LEFT FOOT

2002 · 2 incidents

April 9, 2002 MA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech MACHINERY
P J Keating Company · Struck by... (Not Elsewhere Classified)

EE REMOVING FRONT TIRES TO LOWER TRUCK ONTO LOWBED. REMOVED LAST LUG ON RIGHT SIDE, TIRE SWUNG OUT STRIKING EE IN CHEST AREA.

March 16, 2002 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
P J Keating Company · Fall to the walkway or working surface

EE SLIPPED ON WET GROUND TWISTING LEFT KNEE AT PRIMARY CRUSHER.

2000 · 1 incident

March 23, 2000 MA · Metal/Non-Metal truck driver POWERED HAULAGE
P J Keating Company · Struck against a moving object

THIS ICIDENT OCCURRED WHILE THE EE WAS HAULING SILT. WHILE PROCEEDING UP A RAMP, THE SURFACE OF WHICH IS A 6"STONE SUBASE WITH SILT & FINES, THE LOAD SHIFTED & THE PASSENGER SIDE FRONT TIRE LIFTED. REALIZING THAT HE WOULD NEED A DIFFERENTANGLE TO NEGOTIATE THE TURN AT THE TOP OF THE RAMP, THE DRIVER CHOSE TO BACK THE TRK DOWN THE RAMP WHILE THE TRK WAS BEING BACKED DOWN THE RAMP

1997 · 1 incident

May 21, 1997 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
P J Keating Company · Over-exertion in pulling or pushing objects

THE EMPLOYEE WAS ROLLING AN APPROX 100LB ROCK FROMA PAVED TRAVELWAY TOWARDS THE PRIMARY CRUSHER WERE THE GRAPPLING ARM WARD BE UTILTIZED TO PLACE WITHIN THE CRUSHER. SHORTLY AFTER COMMERCING THIS TASK THE EMPLOYEE FELT A PINCH IN HIS LOWER BACK.

1996 · 5 incidents

October 23, 1996 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman STRIKING OR BUMPING
P J Keating Company · Struck against stationary object

HEAVY RAINS FROM PRECEEDING DAY PLUS POORLY LIT AREA. MUD FELL AND KNOCKED THE GUARD OT OF PLACE ON TOWER #3M, #12 BELT. WHEN HE HIT RIGHT SIDE OF HIS HEAD KNOCKING OFF HARD HAT AND CAUSED A PUNCTURE REQUIRING STITCHES.

August 8, 1996 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
Tilcon Capaldi Inc · Caught in, under or between two or more moving objects

THE EE WAS ATTEMPTING TO FREE ONE OF THE TOP ROLLERS LOCATED ON CONVEYOR 26 WHEN HIS LEFT WRIST GOT PULLED INTO THE MOVING CONVEYOR BELT.

June 17, 1996 MA · Metal/Non-Metal welder (shop) HANDLING OF MATERIALS
Tilcon Capaldi Inc · Struck against a moving object

EMP WAS RIDING IN QUARRY TRUCK. IT WAS HOT INSIDE, WENT TO OPEN VENT WINDOW IN TRUCK WHEN THE WINDOW SHATTERED AND CUT HIS RIGHT INDEX FINGER. HANDLE OF VENT WINDOW BROKE OFF AND HE TRIED PUSH ING WINDOW OPEN WITH HAND AND THAT IS WHEN THE WINDOE BROKE AND CUT HIS FINGER.

March 12, 1996 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Tilcon Capaldi Inc · Fall from machine

EMPLOYEE WHILE WORKING ON HYDRAULIC ARM OF CHERRY PICKER SLIPPED AND WENT TO GRAB ONTO WEDGE. WEDGE LET GO AND HE FLEL TO FLOOR OF PRIMARY STONE CRUSHER.

March 11, 1996 MA · Metal/Non-Metal ledgeman/hand, quarry man OTHER
Tilcon Capaldi Inc · (Not Elsewhere Classified)

ON 3-11-96 AT APPROX 7:10 AM TWO QUARRYY LABORERS WERE TRAVELING ON THE MAIN ACCESS ROAD WHEN THEY CAME ACROSS EE PARKED ON THE RIGHT HAND SHOULDER, APPROX 1500' FROM THE MAIN OFFICE. THE LAB ORERES FOUND EE TO BE RESPONSIVE AND ALERT, HOWEVER, THEY WERE ADVISED BY EE THT HE WAS NOT FEELING WELL AND THAT HE NEEDED AN AMBULANCE. AT WHICH TIME EE WALKED TO THE LABOREREES VEHICLE AND

1995 · 1 incident

April 4, 1995 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Tilcon Capaldi Inc · Fall onto or against objects

EE WORKING AT SAND PLANT, SLIPPED ON POLYMAR HIT TOP PART OF LEFT FOOT ON BAR.

1992 · 1 incident

June 22, 1992 MA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Tilcon Capaldi Inc · Struck against a moving object

DRIVING WATER TRUCK MOTION OF TRUCK CREATED PAIN IN LOWER BACK AND LEGS

1991 · 4 incidents

September 23, 1991 MA · Metal/Non-Metal welder (shop) MACHINERY
Tilcon Capaldi Inc · Struck by flying object

WHILE CHIPPING FRAGMENT FLEW UNDER SAFETY GLASSES INTO EYE. DID NOT EFFECT EYE UNTIL LATER WHEN IT STARTED TEARING DURING NIGHT & NEXT MORNING.

September 16, 1991 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Tilcon Capaldi Inc · Fall to the walkway or working surface

EMPL WALKING ON PLATFORM AROUND SECONDARY CRUSHER SLIPPED ON DIRT THAT HAD FALLEN DOWN FROM SHAKERS TWISTED & FELL ON LEFT ANKLE.

September 12, 1991 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Tilcon Capaldi Inc · Fall from machine

UNPLUGING CRUSHER FULL OF STONE STONE BROKE LOST BALANCE JUMPED ON CATWALK SPRAINED L ANKLE

1990 · 3 incidents

August 22, 1990 MA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Tilcon Capaldi Inc · Over-exertion in pulling or pushing objects

EMPLOYEE PULLED ON ROPE TO HOPPER ON BINS, TO PUT STONE ONTO TRUCK, PULLED MUSCLE IN LEFT ARM.

May 21, 1990 MA · Metal/Non-Metal mine manager, mine foreman, mine owner HANDLING OF MATERIALS
Tilcon Capaldi Inc · Struck by falling object

WHILE CLEANING 32 CONVEYOR A BIG GLOB OF MUD FELL ON RIGHT SHOULDER.

January 17, 1990 MA · Metal/Non-Metal welder (shop) HANDLING OF MATERIALS
Tilcon Capaldi Inc · Caught in, under or between a moving and a stationary object

WHILE PLACING STEEL LINER INTO CRUSHER, EMPLOYEE WAS HOLDIGN LINER. A WELD LET GO ON THE OPPOSITE SIDE CAUSIGN THE SIDE THE EMPLOYEE WAS WORKING ON TO CRUSH FINGER.

1989 · 4 incidents

October 10, 1989 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Tilcon Capaldi Inc · Fall to lower level, (Not Elsewhere Classified)

EE SLIPPED DOWN A COUPLE OF SHELVES WHILE WORKING IN SHOOT AT DUST BIN AT TOWER . HE TWISTED HIS RIGHT ANKLE. HE HAS A SLIGHT FRACTURE UP RIGHT ANKLE.

August 19, 1989 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Tilcon Capaldi Inc · Struck against stationary object

EMPLOYEE WAS CHANGING APRON ON BELT#11. HE CLIMBED OUT OF DOOR STOOD UP AND HIT HEAD. EMPLOYEE WAS WEARING HARD HAT.

July 19, 1989 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Tilcon Capaldi Inc · Fall onto or against objects

EMPLOYEE WHILE SETTING INTO HIS GREASE TRUCK SLIPPED ON OIL ON THE RUNNING BOARD & BANGED HIS SHIN ON RT LEG RESULTING IN A BAD BRUISE HE REMAINS WORKING UP UNTIL AUGUST 8 1989

June 28, 1989 MA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Tilcon Capaldi Inc · Fall from machine

EMPLOYEE WAS GETTING OUT OF WATER TRUCK. HE SLIPPED ON WATER THAT WAS ON FLOOR AT DOORWAY OF TRUCK. FELL ON TO GROUND JAMMING HIS BACK AND SCRAPING INSIDE AREA OF RIGHT ARM.

1988 · 5 incidents

November 25, 1988 MA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Tilcon Capaldi Inc · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS WALKING HOLDING PROPANE TANK WHEN BOTH FEET SLIPPED ON DARK ICE PATCH AND HE FELL LANDING ON TANK.

November 18, 1988 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Tilcon Capaldi Inc · Struck against stationary object

SCREEN WAS ON BACK OF TRUCK WHEN GETTING ONTO TRUCK STEPPED INTO IT. DUE TO TIME, WAS DARK DID NOT SEE SCREEN.

August 17, 1988 MA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Tilcon Capaldi Inc · Fall from machine

WORKER WAS OPERATING WATER TRUCK HE JUMPED OFF WATER TRUCK INJURING BACK

August 12, 1988 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Tilcon Capaldi Inc · Fall to the walkway or working surface

EMP WAS SITTING ON A PC. OF STEEL THAT WAS RESTING ON A TRIPOD TO HOLD IT DOWN WHILE WELDER WAS WORKING ON STEEL PC. TRIPOD HGAVE OUT AND EMP FELL ONTO GROUND HURTING HIS BACK. STEEL PC. H IT HIM IN THE LEG CAUSING LEG TO GET BRUISED.

May 4, 1988 MA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Tilcon Capaldi Inc · Struck by... (Not Elsewhere Classified)

WHILE WORKING ON WATER TRUCK HE HAD LONG PIECE OF HOSE IN HAND, HE DID NOT RELIZE THAT ANOTHER EMPLOYEE WAS BEHIND HIM, HE TURNED AND HIT EMPLOYEE IN THE EYE WITH THE HOSE.

1987 · 2 incidents

October 29, 1987 MA · Metal/Non-Metal welder (shop) HANDTOOLS (NONPOWERED)
Tilcon Capaldi Inc · Struck by... (Not Elsewhere Classified)

I NAME WAS SWIN1ING THE SLEDGE HAMMR WHILE I NAME WAS TACKING THE BUCKET FOR I NAME. I NAME WAS S TANDING RIGHT IN F RONT AND GOT HIT IN THE STOMACH AREA WITH THE SLEDGE HAMMER

August 14, 1987 MA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Tilcon Capaldi Inc · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS GE7TING INTO THE VEHICLE (EUCLID) AND THE DOOR CLOSED ON HIS LEFT WRIST.

1986 · 3 incidents

July 25, 1986 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Tilcon Capaldi Inc · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS BA3GING ON WHEEL WITH SLEDGE HAMMER WHEN HAMMER BOUNCED OFF THE WRENCH AND HAMMER HANDLE STRUCK EMPLOYEE ON RIGHT THIGH.

June 19, 1986 MA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver OTHER
Tilcon Capaldi Inc · (Not Elsewhere Classified)

EMPLOYEE HAD D6MPED LOAD & STOPPED TRUCK-EMPLOYEE FELT AS IF LEFT LEG HAD FALLEN ASLEEP & STARTED TO GET OUT OF TRUCK EMPLOYEE FELT SOMETHING WAS WRONG & HELP ARRIVED AT THE SAME TIME EMPLOY EE TOOK HIM TO 2OSPITAL

February 6, 1986 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Tilcon Capaldi Inc · Over-exertion (Not Elsewhere Classified)

EE WAS USING A 6AR FROM MORE LEVERAGE WHEN BAR SLIPPED FROM HOLD & CAUSED EE TO JERK HIS BODY & SUFFER IN BACK AREA.

1985 · 2 incidents

August 8, 1985 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Tilcon Capaldi Inc · Fall to the walkway or working surface

EMPLOYEE CLEANING DEBRIS FROM AROUND CRUSHER SO PEOPLE COULD WORK THERE. EMPLOYEE APPARENTY SLIPPED ON DEVRIS AND FELL DOWN IN BETWEEN CRUSHER AND CAUSING INJURY.

July 10, 1985 MA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Tilcon Capaldi Inc · Over-exertion (Not Elsewhere Classified)

WALKING BACKWARDS CARRYING SCREEN CLOTH WITH AID OF OTHER EMPLOYEE