Mining Incidents

Amrize Canon City Quarry: 1 recorded fatality Metal/Non-Metal

Controlled by Amrize Ltd
Canon City, Fremont County, CO  ·  Active
MSHA Mine ID: 0500073

Amrize Canon City Quarry has $32K in proposed MSHA penalties and $3K outstanding across 6 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Amrize Canon City Quarry.

Fatalities
1
Total incidents
28
Years on record
1983–2025
Latest incident
Mar 2025
Compliance record
MSHA citations since 2000
163
citations
32
significant & substantial
$31,680
proposed penalties
$25,212
paid to date
80% of proposed penalties paid to date, a $6,468 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
65
inspections on record
1,230
inspection hours
13.2
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
163 citations across 1,230 inspection hours.
Source: MSHA inspections data, updated weekly.

Amrize Canon City Quarry has $32K in proposed MSHA penalties and $3K outstanding across 6 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$32K
proposed penalties
$28K
current assessed
$25K
paid to date
$3K
outstanding
158 assessments are final orders; 6 contested dockets.
Of $10K in penalties contested before the Commission, $6K was upheld in final decisions.
As of the most recent assessment on 2026-01-07.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
19.8%
significant & substantial
9.3%
high negligence or reckless
19.8%
reasonably likely or greater
45.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 6.8% low, 84.0% moderate, 9.3% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
16 citations taken to the federal commission · 10% of citations on record
  • Settled 16 · 100%
70%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 10 decided S&S contests · industry: 79%
37%
Penalty reduction in decided contests
$10K proposed, $6K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2014-10-15.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2014-0552 Settlement Lesnick 2014 $5K → $4K
WEST 2014-1011 Settlement Miller 2015 $2K → $343
WEST 2014-1010 Settlement Miller 2015 $2K → $1K
WEST 2009-760M Settlement Lesnick 2010 $946 → $662
WEST 2015-0057 Settlement Miller 2015 $400 → $400
WEST 2008-264M Settlement Lesnick 2008 $276 → $238
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-01-08
0%
of limit-tested samples over the exposure limit
35
samples
17
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz24
  • Respirable dust, <.1mg9
  • Unlisted Particulate, respirable, <1% Qtz2
Show the individual readings (35)
Date Contaminant Concentration Limit Conc / limit Occupation
2026-01-08 Respirable dust, <.1mg 0 Front-end Loader Operator
2026-01-08 Respirable dust, <.1mg 0 Front-end Loader Operator
2026-01-08 Quartz, respirable, >1% Qtz 0.32 0.61 0.52 Laborer, Bullgang
2026-01-08 Respirable dust, <.1mg 0 Front-end Loader Operator
2023-04-18 Quartz, respirable, >1% Qtz 0.89 1.08 0.82 Crusher Oper/Worker
2023-04-18 Respirable dust, <.1mg 0 Front-end Loader Operator
2023-04-18 Quartz, respirable, >1% Qtz 0.83 0.86 0.97 Crusher Oper/Worker
2022-09-27 Quartz, respirable, >1% Qtz 0.75 1.08 0.69 Dry Screen Plant Operator
2022-09-27 Quartz, respirable, >1% Qtz 0.48 0.9 0.53 Cleanup Man
2022-09-27 Respirable dust, <.1mg 0 Drill Operator, Rotary
2020-09-22 Quartz, respirable, >1% Qtz 0.55 0.68 0.81 Mechanic
2020-09-22 Quartz, respirable, >1% Qtz 0.18 Laborer, Bullgang
2020-09-22 Quartz, respirable, >1% Qtz 0.33 Welder, etc.
2019-01-30 Respirable dust, <.1mg 0 Drill Operator, Rotary
2019-01-30 Respirable dust, <.1mg 0 Front-end Loader Operator
2019-01-30 Quartz, respirable, >1% Qtz 0.14 Mobile Crane Operator
2019-01-30 Quartz, respirable, >1% Qtz 0.22 Laborer, Bullgang
2017-09-19 Quartz, respirable, >1% Qtz 0.56 1.27 0.44 Laborer, Bullgang
2017-09-19 Quartz, respirable, >1% Qtz 0.24 0.64 0.38 Laborer, Bullgang
2017-09-19 Quartz, respirable, >1% Qtz 0.83 1.02 0.81 Laborer, Bullgang
2017-07-26 Quartz, respirable, >1% Qtz 1.02 Crusher Oper/Worker
2017-07-26 Quartz, respirable, >1% Qtz 0.89 Laborer, Bullgang
2017-07-26 Respirable dust, <.1mg 0.03 Front-end Loader Operator
2017-07-26 Quartz, respirable, >1% Qtz 0.66 Laborer, Bullgang
2014-07-24 Quartz, respirable, >1% Qtz 0.38 1.25 0.30 Crusher Oper/Worker
2014-07-24 Quartz, respirable, >1% Qtz 0.31 0.57 0.54 Supervisor, Co. Official
2010-02-10 Quartz, respirable, >1% Qtz 0.39 1.51 0.26 Mechanic
2010-02-10 Respirable dust, <.1mg 0 Front-end Loader Operator
2010-02-10 Unlisted Particulate, respirable, <1% Qtz 0.38 Front-end Loader Operator
2010-02-10 Quartz, respirable, >1% Qtz 0.63 1.25 0.50 Crusher Oper/Worker
2010-02-10 Unlisted Particulate, respirable, <1% Qtz 0.91 Mechanic
2008-02-06 Quartz, respirable, >1% Qtz 0.62 0.74 0.84 Laborer, Bullgang
2008-02-06 Quartz, respirable, >1% Qtz 0.77 1.3 0.59 Crusher Oper/Worker
2004-06-16 Quartz, respirable, >1% Qtz 0.6 0.75 0.80 Cleanup Man
2004-06-16 Quartz, respirable, >1% Qtz 0.4 0.64 0.63 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Amrize Canon City Quarry recorded 3.69 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
3.69
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Colorado, metal and nonmetal mining averaged 1.64 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 3.69 0.00 0.000
2024 * 0.00 0.00 0.000
2023 * 0.00 0.00 0.000
2022 * 0.00 0.00 0.000
2021 * 0.00 0.00 0.000
2020 * 6.02 0.00 0.000
2019 * 10.06 0.00 0.000
2018 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Sturbaum Construction Company 1950 to 1983
  2. Sniders' Aggregate Inc 1983 to 1993
  3. Tezak Heavy Equipment, LLC 1993 to 2023
  4. Amrize West Central Inc. 2023 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 25
2025 25
2024 23
2023 21
2022 14
2021 16
2020 14
2019 16
2018 16
2017 17
2016 13
2015 12
2014 13
2013 12
2012 8
2011 7
2010 8
2009 8
2008 15
2007 11
2006 11
2005 12
2004 12
2003 9
2002 12
2001 11
2000 12
Source: MSHA quarterly employment and production, updated weekly.

Amrize Canon City Quarry sits in Fremont County, Colorado, where the Census mining category is 0.6% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Fremont County, Colorado · Population 49,394
0.6%
Mining share of county employment
$61,027
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 15,653 0 0 0.0
2026 Q1 14,372 3 0 208.7
2025 Q4 14,806 0 0 0.0
2025 Q3 12,414 0 0 0.0
2025 Q2 12,946 5 0 386.2
2025 Q1 14,030 0 0 0.0
2024 Q4 17,549 7 1 398.9
2024 Q3 13,810 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 14,252 5 0 350.8
2024 Q1 17,200 0 0 0.0
2023 Q4 12,341 4 0 324.1
2023 Q3 11,851 0 0 0.0
2023 Q2 9,457 4 0 423.0
2023 Q1 8,246 0 0 0.0
2022 Q4 9,102 2 0 219.7
2022 Q3 9,750 0 0 0.0
2022 Q2 8,942 2 0 223.7
2022 Q1 8,847 0 0 0.0
2021 Q4 9,896 4 1 404.2
2021 Q3 10,581 0 0 0.0
2021 Q2 9,825 1 0 101.8
2021 Q1 8,740 1 0 114.4
2020 Q4 9,188 0 0 0.0
2020 Q3 10,018 0 0 0.0
2020 Q2 6,806 5 0 734.6
2020 Q1 7,201 4 0 555.5
2019 Q4 8,047 0 0 0.0
2019 Q3 9,459 5 3 528.6
2019 Q2 9,354 0 0 0.0
2019 Q1 12,902 2 0 155.0
2018 Q4 11,368 0 0 0.0
2018 Q3 11,159 0 0 0.0
2018 Q2 9,085 0 0 0.0
2018 Q1 8,483 2 0 235.8
2017 Q4 9,230 0 0 0.0
2017 Q3 11,112 3 1 270.0
2017 Q2 11,052 0 0 0.0
2017 Q1 11,134 1 0 89.8
2016 Q4 8,526 0 0 0.0
2016 Q3 8,313 0 0 0.0
2016 Q2 7,705 1 0 129.8
2016 Q1 6,996 0 0 0.0
2015 Q4 7,028 6 0 853.7
2015 Q3 7,588 0 0 0.0
2015 Q2 7,525 4 0 531.6
2015 Q1 6,876 1 0 145.4
2014 Q4 8,169 0 0 0.0
2014 Q3 8,920 11 3 1233.2
2014 Q2 9,330 0 0 0.0
2014 Q1 7,560 10 6 1322.8
2013 Q4 7,563 0 0 0.0
2013 Q3 9,058 0 0 0.0
2013 Q2 7,474 3 1 401.4
2013 Q1 6,598 3 1 454.7
2012 Q4 5,256 0 0 0.0
2012 Q3 5,818 1 0 171.9
2012 Q2 4,407 0 0 0.0
2012 Q1 5,223 0 0 0.0
2011 Q4 5,094 0 0 0.0
2011 Q3 4,132 0 0 0.0
2011 Q2 4,425 3 2 678.0
2011 Q1 3,964 2 1 504.5
2010 Q4 4,084 0 0 0.0
2010 Q3 4,328 0 0 0.0
2010 Q2 5,005 2 0 399.6
2010 Q1 5,426 1 0 184.3
2009 Q4 4,533 0 0 0.0
2009 Q3 5,473 0 0 0.0
2009 Q2 4,539 6 2 1321.9
2009 Q1 3,968 1 1 252.0
2008 Q4 8,801 0 0 0.0
2008 Q3 9,441 0 0 0.0
2008 Q2 8,912 4 0 448.8
2008 Q1 8,297 3 2 361.6
2007 Q4 6,843 0 0 0.0
2007 Q3 7,217 6 1 831.4
2007 Q2 7,304 0 0 0.0
2007 Q1 5,409 0 0 0.0
2006 Q4 6,456 0 0 0.0
2006 Q3 8,025 0 0 0.0
2006 Q2 6,345 0 0 0.0
2006 Q1 7,122 0 0 0.0
2005 Q4 6,722 4 1 595.1
2005 Q3 6,466 1 0 154.7
2005 Q2 5,701 0 0 0.0
2005 Q1 4,947 0 0 0.0
2004 Q4 6,119 0 0 0.0
2004 Q3 6,011 0 0 0.0
2004 Q2 6,216 8 1 1287.0
2004 Q1 5,021 0 0 0.0
2003 Q4 5,123 0 0 0.0
2003 Q3 6,212 4 0 643.9
2003 Q2 5,623 0 0 0.0
2003 Q1 3,762 0 0 0.0
2002 Q4 5,502 4 0 727.0
2002 Q3 6,337 0 0 0.0
2002 Q2 5,467 1 0 182.9
2002 Q1 5,290 0 0 0.0
2001 Q4 5,903 0 0 0.0
2001 Q3 6,115 4 2 654.1
2001 Q2 6,185 0 0 0.0
2001 Q1 5,445 0 0 0.0
2000 Q4 5,768 0 0 0.0
2000 Q3 6,060 0 0 0.0
2000 Q2 7,208 0 0 0.0
2000 Q1 7,094 6 1 845.8

Fatalities at this mine

1 recorded
August 5, 1983 CO · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator Fatality · FALLING/SLIDING/ROLLING MATERIALS
Sniders' Aggregate Inc · Caught in, under or between (Not Elsewhere Classified)

WHILE CHANGING THE POSITION OF THE TIRES ON A STACKING CONVEYOR THE JACK SLIPPED AND THE CONVEYOR TURNED OVER SERIOUSLY INJURING ONE AND RESULTING IN A FATALITY FOR ANOTHER THE CONVEYOR WAS NOT PROPERLY BLOCKED OR CRIBBED

Reportable incidents

27 on file (excluding fatalities above)

2025 · 1 incident

March 25, 2025 CO · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Amrize West Central Inc. · Struck by falling object

The worker was reinstalling a spring onto a tension pulley system. During this process the worker was holding the pulley up with EE's right hand and installing a plate with EE's left hand, when the pulley slipped from EE's right hand and made contact with EE's left thumb.

2020 · 1 incident

2019 · 2 incidents

January 11, 2019 CO · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey SLIP OR FALL OF PERSON
Tezak Heavy Equipment, LLC · Fall from piled material

Employee was in a kneeling position and when they got up they stumbled off of a muck pile and came down on their left leg hurting their left knee.

January 10, 2019 CO · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman POWERED HAULAGE
Tezak Heavy Equipment, LLC · Struck by powered moving object

Employee was cleaning out from under a catwalk and was struck on right shin by an attachment from the skid-steer that was assisting in the cleanup process, and received a contusion to the shin.

2017 · 1 incident

July 26, 2017 CO · Metal/Non-Metal superintendent OTHER
Tezak Heavy Equipment, LLC · (Not Elsewhere Classified)

Employee was directing an asphalt truck back to dump on entrance road into quarry and was overcome with a massive heart attach (cardiac arrest)

2016 · 1 incident

June 25, 2016 CO · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer SLIP OR FALL OF PERSON
Tezak Heavy Equipment, LLC · Over-exertion (Not Elsewhere Classified)

EE was performing maintenance on crusher. Stepped backward and strained left knee. Examined at St. Thomas More, released without restrictions.

2014 · 3 incidents

October 6, 2014 CO · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Tezak Heavy Equipment, LLC · Over-exertion (Not Elsewhere Classified)

States that he was exiting haul truck in a hurry to get to the men's room. His foot slipped and he stopped his fall by grabbing the side rail with his left hand, spraining his left wrist. Steps were clean and dry.

July 21, 2014 CO · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Tezak Heavy Equipment, LLC · Struck by... (Not Elsewhere Classified)

Employee was cutting crown rubber with utility knife. Knife slipped and cut his left thumb. Stitches were required. Able to return to work.

March 12, 2014 CO · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Tezak Heavy Equipment, LLC · Absorption of radiations, caustics, toxic and noxious substances

Employee was cleaning cone for crusher where it is seated with airplane stripper. He was wearing safety glasses and long sleeve gloves at the time. Employee believes that after reaching into the cone with his glove to clear trash that he must have touched his face with his glove.

2009 · 1 incident

August 6, 2009 CO · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer STEPPING OR KNEELING ON OBJECT
Tezak Heavy Equipment, LLC · Struck against stationary object

Was picking some wood out of rock and he twisted his right knee when he stepped wrong on a rock.

2008 · 1 incident

June 23, 2008 CO · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Tezak Heavy Equipment, LLC · Fall onto or against objects

A driver of a leaser's truck caught his sneaker on the truck as he was getting down to get his scale ticket and he fell and hit the side of the scale house. He injured both his right shoulder and his right cheek.

2006 · 2 incidents

February 13, 2006 CO · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor STRIKING OR BUMPING
Tezak Heavy Equipment, LLC · Struck against stationary object

Employee was rushing to help injured employee and hit right shin on handrail.

February 13, 2006 CO · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Tezak Heavy Equipment, LLC · Struck by... (Not Elsewhere Classified)

Employee was tightening bolt on crusher jaw. Bolt broke and wrench and spring hit him in the face. His nose was broken and stitches were required.

2002 · 1 incident

September 17, 2002 CO · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator MACHINERY
Tezak Heavy Equipment, LLC · Struck against a moving object

ROCK WAS PUSHED OFF HIGHWALL & HIT THE EDGE OF HIS MACHINE & JARRED HIM, INJURING HIS SHOULDER. (WC PENDING INVESTIGATION, EE DIDN'T REPORT TILL MUCH LATER.)

2000 · 1 incident

May 23, 2000 CO · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Tezak Heavy Equipment, LLC · Over-exertion in lifting objects

EE STATES THAT INJURY PROBABLY OCCURRED WHEN HE WAS LIFTING SOMETHING.

1991 · 1 incident

June 9, 1991 CO · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Sniders' Aggregate Inc · Struck against stationary object

I NAME WAS USING A SLEDGE HAMMER TO POUND SOMETHING WHEN HE STRUCK WITH THE HAMMER HIS HAND MOVED DOWN THE HANDLE & STRUCK AGAINST THE OBJECT ALSO HE WAS WEARING GLOVES HE RECEIVED A SMALL CUT TO HIS RT INDEX FINGER I NAME SAW DR BECAUSE HETHOUGHT HE MIGHT NEED STITCHES DR ADVISED CLEANING TWICE DAILY APPLYING A SILVABENE CREAM & A REGULAR BANDAIDE

1989 · 1 incident

April 6, 1989 CO · Metal/Non-Metal drill operator SLIP OR FALL OF PERSON
Sniders' Aggregate Inc · Caught in, under or between a moving and a stationary object

HE WAS BACKING THE AIR TRACK UP HE WAS STANDING AT THE SIDE WHEN HE STEPPED BACK HE TRIPPED ON A ROCK AND FELL HOLDING ONTO THE CONTROLS AND THE MACHINE RAN OVER HIS FOOT HE THEN REACHED UP TO THE CONTROLS AND MOVED THE MACHINE CRUSHED HIS R FOOT HE DIDNT HAVE ANY BROKEN BONES SINCE HE HAD ON SAFETY BOOTS BUT THE MUSCLE AND ARTERIES WERE CRUSHED

1988 · 3 incidents

December 22, 1988 CO · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Sniders' Aggregate Inc · Caught in, under or between two or more moving objects

EMPLOYEE WAS HITTING TWO PIECES OF STEEL TOGETHER, AGAINST EACH OTHER AND SMASHED HIS THUMB BETWEEN THE TWO PIECES.

December 12, 1988 CO · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Sniders' Aggregate Inc · Struck by flying object

HE WAS HELPING TO GET SOME MATERIAL THAT WAS STUCK IN THE PRIMARY TO GO ON THROUGH,ANOTHER EMPLOYEE WAS USING A STEEL BAR TO SHOVE ON THE MATEIRAL WHEN A ROCK CAME FLYING OUT.

November 5, 1988 CO · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Sniders' Aggregate Inc · Struck by flying object

EMPLOYEE WAS CUTTING NUTS OFF OFF BELT FASTENERS WITH A WELDING TORCH AND WAS NOT WEARING THE CUSTOMARY EYE PROTECTION AND A PICE OF METAL GOT INTO HIS EYE.

1987 · 1 incident

September 3, 1987 CO · Metal/Non-Metal drill operator MACHINERY
Sniders' Aggregate Inc · Struck by falling object

HE WAS SET UP T2 START DRILLING WITH AN AIR TRAC DRILL WHEN HE DECIDED TO CLEAN SOME ROCK FROM UNDERNEATH THE STEEL, THE ROCK WAS LOOSENED AND THE STEEL CAME DOWN ON HIS FINGERS.

1985 · 1 incident

May 15, 1985 CO · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Sniders' Aggregate Inc · Struck against stationary object

WHILE CLEANING ROCK OUT OF THE JAW, I NAME PUSHED ONE ROCK WITH ONE HAND ON TOP OF HIS OTHER HAND. WHICH CUT HIS FINGER.

1983 · 5 incidents

September 16, 1983 CO · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Sniders' Aggregate Inc · Struck by flying object

WHILE EMPLOYEE WAS HELPING TO OTHER EMPLOYEES CHANGE SCREENS ON THE CRUSHER HE GOT DIRT IN HIS EYE THE DIRT WAS THOUGH TO BE WASHED OUT BUT A SMALL AMOUNT REMAINED AND THE EMPLOYEE KEPT RUBBI ING HIS EYE THEREFORE HE WENT TO THE DR AT THE END OF THE DAY TO THE REST OF THE DIRT OUT.

August 5, 1983 CO · Metal/Non-Metal electrician, lineman OTHER
Sniders' Aggregate Inc · Bodily reaction, (Not Elsewhere Classified)

AT TIME OF ACCID HAD JUST HAD SERIOUS ACCID INVOLVING CONVEYOR TURNING OVER AND SERIOUSLY INJURING ONE AND RESULTING IN FATALITY TO ANOTHER- THIS EMPL WAS RUNNING TO HELP WHEN INJURED KNEE.

August 5, 1983 CO · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Sniders' Aggregate Inc · Struck by falling object

WHILE CHANGNG THE POSITION OF THE TIRES ON A STACKING CONVEYOR THE JACK SLIPPED AND THE CONVEYOR TURNED OVER SERIOUSLY INDURING ONE AND RESULTING IN A FATALITY FOR ANOTHER THE CONVEYOR WAS NOT PROPERLY BLOCKED OR CRIBBED