Bridgeport Plant Metal/Non-Metal

Employee was performing an inspection on the 90CR001 horizontal shaft impact crusher during a shift change. Upon inspection of the HSI Crusher, the employee found blow bars backed off and was in the process of torquing them when the employee fell approximately 4' onto the underlying 90CV001 belt. Employee received right ankle, shoulder and head injuries.

While collecting material left over from a completed shaker screen change, the employee (EE) was in the process of moving a steel plate to be taken down from the tower. During the movement, the plate shifted unexpectedly and pinched EE's finger between the plate and the catwalk. The employee reported that EE removed EE's glove and noticed bleeding from the tip of EE's finger.

Employee reported on June 28th that sometime during the evening of the 24th EE was bitten by an insect on EE's right forearm, and it progressively swelled up, EE sought medical attention. EE was taken to a clinic and treated for cellulitis. On the 29th the employee requested a hospital evaluation for continued swelling and was treated for inflammation.

The employee was heating a bolt for extraction when a piece of paint flaked off and entered employee's eye. At the time, employee was looking over the top of employee's prescription safety glasses, which were tinted due to their transition lens feature. The piece was removed with a swab and antibiotic drops were prescribed.

Employee was working on the screen at Scrubber Tower 10SC002. After putting all the tools away, the employee went down to the MCC to remove the lock and commented to a coworker EE couldn't find EE's vaping device and rushed up the tower, climbing too quickly into the screen EE's right foot got caught in the screen panel and EE fell twisting and straining it, the ankle and knee.

The employee was walking back to the loader and stepped on the loader's parking mound. EE slipped and lost balance. While falling forward EE hit left knee on the ground and put left arm out onto the loader to stop self from falling forward, hyper-extending the left shoulder and scraping left knee.

Electrician was testing a breaker, the fuse box arc flashed throwing the electrician back causing minor FA treatment burns on R wrist and neck. The employee was taken to the ER for evaluation and was released with no serious injuries or restrictions. Employee was re-evaluated on 1/24/25 for aches and pains to R wrist and R knee and was prescribed sessions of physical Therapy.

Welder was performing work on the head chute 80-CH-002 and had to install temporary steps for access inside the chute by tack welding the steps in place. After complete, steps were being removed by breaking tack welds with hammer. One of the steps rolled over and hit left corner of forehead causing small cut requiring 4 stitches.

EE was riding as a passenger in a fuel truck when the driver over-corrected the vehicle on an uneven surface, causing the vehicle to flip over to the passenger side. The passenger incurred a right shoulder rotator cuff strain.

Employee was moving extra chain out of the way from an air hoist holding a screen up. The airline fitting feeding air to the air hoist had a crimp fail and pulled loose. When the crimp failed the air filter that hangs from the air hoist, that weighs approximately 10LBS, fell approximately 18 feet striking the employee in the right arm just below the elbow.

Employee was attempting to load a return roller training frame into a wheelbarrow by self and it started slipping in EE's hand and EE lunged forward to put it in the wheelbarrow. While doing so, EE lacerated EE's right index finger in between the frame and wheelbarrow.

Employee was attempting to put an impact roller from a conveyor belt back on the frame. The roller got wedged between frame and the roller. Employee was holding the roller with one hand on each end and the roller got unstuck. The roller landed on and pinched EE's pinky finger.

After filling up a loader when employee stopped the nozzle the hose feeding the nozzle from the Mobile Fuel Truck blew out spraying EE in the face with red diesel.

The employee was pulling a 1-½" water hose under 80CV004 conveyor belt and it got stuck so they pulled harder and that's when they felt a sharp pain in their abdomen down to their groin

Employee got debris in their eye while walking around the shop area.

After power washing a piece of mobile equipment, an employee fell approximately 6' to the ground while descending a ladder. The employee suffered a bruised lower back and was given days off of work.

Employee was walking out of the flocculant building and slipped outside of the sliding barn doors. When they fell, their left forearm hit the bottom of the metal door and cut their arm 2" x 2" in the shape of a V.

While removing a shaft from crusher roll 2, a maintenance employee was tapping the shaft with a hammer when a small piece of metal flew off. The injured employee was standing ~10' away, was struck by the metal, and it became embedded on the right side of their neck. The employee was taken to the ER where the metal was removed and the employee received 3 stitches to close the wound.

Main water pump at mine had blockage. Employees of the mine along with one contractor employee were taking the pump apart to remove the blockage. Heat/steam had built up pressure in the pump unknowingly and released when the bolts were removed from the flange on the pump. Result was 2nd degree burn on 25% of body of contractor employee.

As the suction line was being removed at the Primary scrubber 10 PU 1 pump, hot steam and water was released out of the suction line injuring 3 employees and 1 contractor.

As the suction line was being removed at the primary scrubber 10 PU 1 pump, hot steam and water was released out of the suction line injuring 3 employees and 1 contractor.

As the suction line was being removed at the Primary scrubber 10 PU 1 pump, hot steam and water was released out of the suction line injuring 3 employees and 1 contractor.

Employee was cutting and grinding metal with a torch and grinder and began to feel irritation in their eye. After employee flushed out with eye wash, irritation continued and resulted in a visit to the doctor. Nothing was removed from the employee's eye but EE was given a prescription. The employee was wearing safety glasses and a face shield while conducting the work.

Employee was climbing down off a ladder, while in the process they stepped on a rock causing them to roll their right ankle, resulting in a sprain.

Employee was cutting a pipe out of an old tank, once the final cut was made the pipe, which was under pressure gave way and struck the employee in the face resulting in a small hairline fracture laceration to the employees nose resulting in 3-4 stitches.

While employee was unloading a bucket of hydraulic fluid from the back of truck, the plastic rim of the bucket broke causing the metal handle that the employee was holding to slip. While in the process of slipping the metal handle (hook on handle) caused laceration to employee's right index finger resulting in stitches.

Employee was inside tank welding a patch over a leak. Night shift control room operator was unaware and started pumps in preparation to start plant, causing water to rush into tank while employee was inside. EE was taken to ER and was given antibiotics and kept overnight for observation. EE was not able to return to next regular scheduled shift, making this a LTI.

Employee was cutting a torch hose when employee slipped off and cut right thigh.

Employee was dismounting from the motor grader while conducting the pre-shift inspection on the equipment. As the employee came down facing forward, EE's left pinky finger caught a tire tread groove and was jammed, causing a possible dislocation and a fracture of 5th digit.

EE was working to shorten a chain on an apron feeder. When attempting to drive a connecting pin back into the chain, the pin fractured causing shrapnel to strike the EE in the forehead causing a small laceration. EE received 3 sutures to close the wound.

EE was installing the shroud on the differential and was checking shroud and gear clearance. EE's finger got caught between the gear and the shroud

On 07/25/2018 at approx. 1430 hrs, a Haul Truck Operator, fell approximately 9' to ground while attempting to dismount the Cat 777D EE was operating. EE sustained lacerations to the head and an open compound fracture of the right forearm that required surgery to repair. EE was not able to report to work on EE's next regularly scheduled shift, making this a Lost Time Injury.

EE was working to clean a section of conveyor ee was to perform maintenance work on. As ee went to pull a water hose out from under a conveyor, ee stepped backward tripping on a section of the water hose that was on the ground behind ee, causing ee to fall onto left wrist, fracturing it.

EE was performing hot work on a crusher roll, as EE stepped back to review the cut EE had made, the limestone fines found in the crevices of the roll burst outward, causing dust to enter the employee's left eye. Employee was seen by Dr. and a corneal abrasion was found and prescribed eye medication.

EE was working on a roll crusher that was being rebuilt, while attempting to free up a bolt that had been cut from a sizing segment, the pry bar ee was using slipped and struck the employee on the lower right side of the jaw, breaking a wisdom tooth. EE had the tooth extracted by an oral surgeon on 1FEB2018, sutures were used to close the incision.

EE was descending cab of Cat 992G Loader when the EE slipped on the last rung of the ladder, falling backwards onto head creating a laceration that required 4 staples to close. EE was released to work without restrictions.

While attempting to mount a Cat 777D, an employee with 2 years of mining experience had the wire rope ladder swing forward towards the vehicle causing the employee to fall downward with right foot still on the rung and landed on ee still extended left leg. As a result the employee suffered a hyperextension of the right knee.

WHILE GRINDING ON CRACK ON DISCHARGE OF DEWATERING SCREEN, GRINDER HUNG ON CRACK AND KICKED BACK; KNOCKING OFF WELDING HELMET AND HITTING EMPLOYEE'S MOUTH, CUTTING LIP.

On 3/23/2017, EE reported minor pain in left knee after stepping down 2.5' onto a conveyor from within the body of a cone crusher. On 3/29/2017 EE asked to see the Dr. prior to going on vacation, diagnosed w/ L knee MCL Sprain. On 04/05/2017, EE had follow up visit w/DR upon return from vacation and was released back to work with restrictions.

While removing the metal skirt board from the conveyor, employee's left pinky finger was caught between the skirt board in hand and chute. Employee was wearing glove for safety. Cut was immediately attended to in Emergency Room and received 4 stitches and antibiotics. No lost time days.

While lowering chain curtain into a feed chute in an aggregate silo, worker reached down to move the curtain into the slot, the curtain shifted and caught the end of his glove pulling his finger under the shaft attached to the curtain, smashing the tip of his finger off.

While removing flywheel for maintenance, a 3/4" bolt broke, hitting worker above the eye and making a minor cut requiring stitches.

While removing a fly wheel for maintenance, a 3/4" bolt broke. Flying debris hit a worker and bruised his left arm and right hand.

Setting screen deck in place, got hung up, employee was looking to see where it was hung up at, deck suddenly slid down frame landing down on his right lower leg between deck and channel iron, was not pinned in due to the back up come-a-long being in place.

The employee was cleaning a chute of consolidated material when a large portion of material came loose and struck him in the chest. He suffered fractures to the ribs (2) and sternum.

Scrubber pump above new screen had dripped oil onto deck. Worker slipped in oil puddle landing on left shoulder.

Employee was using an impact wrench to tighten a J-bolt. His left index finger was struck by the spinning j-bolt resulting in soft tissue damage and a slight fracture. First aid treatment only. X-ray positive for fracture is the reason for reporting.

Employee was replacing an air pump in operators seat. He had the seat blocked up and the block slipped crushing his right arm.

Employee stooped down to pickup a 12 to 18" rock and felt pain in his lower back.

Employee was attempting to turn a valve when his right leg slipped causing the injury to his right knee.

Employee suffers from tendonitis in the left shoulder as a result of repetitious work related activity. Fueling 777 Cat haul trucks.

Employee sprained his ankle when he stepped on to cat walk after releasing his lanyard from a position above his head.

The employee was dragging a tow cable. He dropped the cable and it struck his right thigh causing a laceration. Sutures were required.

Employee was attempting to move around the end of a rail car, when he slipped and fell striking his head on the rail car. Height of fall was approx.3 ft. Sutures required to close wound.

A mechanic suffered a torn meniscus in the left knee when the tailgate on the service truck struck his knee while attempting to climb in the bed. The employee refused medical attention until January 20th, 2014. The employee continued his normal duties until surgery on May 13th 2014. This report is delayed due to delayed diagnosis and no medical treatment for 14 months.

Employee reported left shoulder began hurting while driving truck. Initial diagnosis was strain/sprain. MRI revealed arthritis, bone spurs, and SLAP tear. None of these conditions are a result of employees work activities. Employee was prescribed therapy beginning 11/27/12. Advised by MSHA Denver to report incident anyway.

Employee was lifting a 10 lb ladder out of a rail car and felt a burning in his right shoulder. Acute tendonitis

Employee's left hand was struck by a rock while his hand was resting on a handrail. Broken bones and lacerations.

Retrieved tools from top of pad mount transformer at the end of the day, coming down the ladder fell from bottom step to the ground landing flat of back

Employee was lifting a roll of skirtboard rubber causing strain. This injury became reportable on Jan. 13th 2012, when the employee finally was able to see an orthopedic surgeon. The injury had not been medically treated or immobilized, nor had any prescription been issued and the employee continued to perform his normal duties as a leadman at the loadout.

Employee's left index finger was caught between an electric motor and motor base as the motor was being lifted by a mobile crane. The employee was trying to prevent the motor from swinging.

The employee was grinding inside a shaker when a tiny particle bounced off the side of the shaker and went behind his safety glasses. The particle was removed with a cotton swab but antibiotic drops were administered to prevent infection.

Employee was using a steel bar to clear chute of obstruction. The bar pulled through his hand cutting his glove and his left hand. The injury required sutures.

EE had been working on machine when he felt pain in right forearm. Pain has progressed and treatment was sought one week later.

EE was using a grinder and a piece of metal fell into his right eye. He was wearing required PPE and conditions were windy.

This customer truck driver attempted to exit the cab of his truck and became entangled in the seat belt causing him to fall out of his truck breaking his leg.

Employee was trying to pull a grease gun hose from a grease line hose. He was having difficulty. He exerted more force causing the two hoses to come apart. His right hand flew into a conveyor frame below the hand rail. His right index finger went into the pinch point between the roller and conveyor belt. He suffered a fractured & lacerated finger.

Employee lacerated his right thumb on a razor knife while performing repairs to a R60 Haul truck.

Drill steel fell out of carousel. Driller couldn't get it back in by himself so he had EE come help him. Pipe was stuck so the driller started the rotary head down to unstick it but it hit the pipe smashing EE's hand.

While cutting holes in a piece of belting to be used as a curtain on a dewaterings screen at the sand plant, EE was on the 7th hole and standing while cutting toward his body, the utility knife came off the belt bringing the knife across his right thigh leaving approx a 1.5 cm laceration just above his knee.

Employee was operating a dozer pushing material. As he was backing the dozer, he struck a large rock, jarring and straining his neck.

Employee was in the process of repositioning a grease line, when his left index finger (finger nail) was caught in between belt and roller. The employee received a lacaretion, requiring sutures.

Water discharge hose separated and struck employee.

Employee struck by water discharge hose, 10", 65 psi, when hose seperated from fitting.

Employee stepped backwards and fell to ground. Landing on left wrist and spraining wrist.

Employee was grinding on a weld when he was struck in the left eye by a foreigen object

Employee was climbing in to a chute to do repair work when he slipped and fell and injured his wrist and brusied over back

Employee was climbing down the ladder on a Cat 740 haul truck when the truck was bumped by a Cat D9 dozer. The employee lost his grip on the ladder and fell to the ground injuring his left ankle/foot. Broken bones in the left foot.

Workers were performing conveyor roller replacement, when an 8' long roller slipped and slid on framework, towards worker. Worker put up his right hand and roller pinned worker between roller and column, bending right hand back onto his arm.

Employee was climbing off of a hitachi model 1100 shovel when he slipped and fell spraining his right ankle

Employee was removing a screw from a wiring harness on a sensor when he heard a poping noise from his left wrist as a result of holding the wires down keeping them from moving. Employee was issued a splint from a doctor on 8/29/05.

Employee while lifting sample buckets for Q.C. out of truck turned and felt a pain in middle of back while taking samples to lab. On 8/15 received notice from doctor that employee was diagnosed with back pain and was being treated with Chiropractic care. Employee was released to work on modified duty.

After employee finished cutting pipe he noticed small clump of grass on fire. As employee raked dirt onto fire with foot felt sharp pain in right knee. According to doctor, employee sprained knee and was issued a brace.

Employee while removing broken glass from window pane cut through gloves and lacerated his left thumb. He was taken to the local hospital where he recieved 5 stitches. He returned to work on same shift with no restrictions.

While inspecting a rail car, EE pulled right shoulder. At the time, EE did not feel anything was wrong with shoulder. EE decided to see a doctor on 4/11/05. Doctor released EE to work, no restr. & scheduled MRI. Specialist reviewed MRI, diagnosed a rotary cuff injury on 5/10/05. Employee released back to work, restricted duty, until surgery on 5/26/05.

Employee was standing on a platform observing the Primary hopper being cleaned out by the backhoe when a hinged catwalk section he had lifted and latched back to the handrails prior to, came down and landed on the employees' foot. The conditions contributing to the accident was due to the latch failing to hold the catwalk.

Employee, while assisting the ground crew get a sump pump out of a muddy area, strained his groin area. The employee was diagnosed on 11/29 as having a hernia and was scheduled to have surgery on 12/13/04. Employee continued to work with no restrictions to his job up until his surgery.

While drilling, employee wiped his (L) eye with his sleeve and got a piece of metal in it.

After exiting his personal vehicle, employee was walking across parking lot and stepped on some clothes hangers. He fell striking his left knee on the ground. This accident was not reported to his supervisor until 11/02/04.

Employee was welding on a 12" pipe in the sand plant and was grinding on root pass when the wind gusted and particles got into his eyes.

Employee was grinding and when he raised his face shield, accumulated metal shavings on the frame went into his eye.

EMPLOYEE WAS WORKING INSIDE THE ELECTRICAL TRANSFORMER AT THE TRUCK LOADOUT PULLING WHEN HE FELT A STING ON HIS WRIST.

employee slipped and fell off of a 275 clark loader while attempting to climb down the loaders ladder. two broken ribs on his lower left side

EMPLOYEE WAS CLIMBING OUT OF RAIL CAR WHEN HE SLIPPED AND FELL TO THE GROUND BREAKING HIS LOWER LEFT LEG.

EE WAS UNLOADING PIPE TRAILER WHEN FLANGES FROM ONE PIPE STRUCK ANOTHER CAUSING LOAD TO MOVE. EE JUMPED APPROX. 4 FEET TO THE GROUND TO AVOID BEING HIT BY A PIPE.

EMPLOYEE WAS WALKING AROUND CHASING IRON AND STEPPED ON GROUND THAT WAS UNEVEN BECAUSE OF RAIN AND TRACKS TWISTING HIS ANKLE.

EE LIFTED THE GANG BOX DOOR UP, PUSHED THE DOOR IN AND THE LID FELL STRIKING HIS CHEEK. CHEEK WAS LACERATED REQUIRING STITCHES.

Shovel struck rear of haul truck waiting to be loaded.

OPERATOR PULLED WRONG LEVEL ON PUMP. PUMP SWUNG AND HIT FACE AND NOSE (9 STITCHES).

EMPLOYEE WAS CLIMBING DOWN OFF HAUL TRUCK WHEN HE SLIPPED AND BUMPED HIS KNEE. EE REFUSED MEDICAL TREATMENT AT THAT TIME. ON 9/13/02 EE ASKED TO SEE THE DR BECAUSE HIS KNEE WAS STILL HURTING. THE DR TOLD THE EE TO TAKE OFF WORK UNTIL HE COULD SEE A SPECIALIST FOR HIS KNEE. THE COMPANY DID NOT RECEIVE THE INFORMATION ON THE EE BEING TOLD TO STAY OFF WORK UNTIL 9/17/02.

EE WAS WORKING ON A WATER PUMP WITH A PIPE WRENCH WHEN THE WRENCH SLIPPED OFF AND SMASHED THE EE MIDDLE FINGER ON HIS RIGHT HAND.

TWO EE WERE REMOVING A GUARD FROM AN A.C. CRUSHER DRIVE. THE GUARD FELL, STRUCK A PIPE, AND THEN STRUCK THE EE LEFT ARM. THE EE RECEIVED A LACERATION REQUIRING 14 SUTURES.

EE WAS WORKING ON C-5 CONVEYOR WHEN A ROCK FELL ON HIS RT. HAND.

EE WAS DRAGGING A LARGE WATER HOSE WHEN HE STRAINED HIS BACK.

EMPLOYEE WAS WALKING IN MECHANIC SHOP AND TRIPPED ON TORCH LEAD, RESULTING IN FRACTURE TO RIGHT HAND.

LOCKING RAIL CAR DOORS WITH 4 LB. HAMMER, CAUSING EMPLOYEE'S HIP TO DISLOCATE.

EE CLAIMS TO HAVE DEVELOPED CARPAL TUNNEL SYNDROME FROM REPETITIVE SHOVELING WHILE CLEANING RAIL CARS.

EE WAS WALKING DOWN WALKWAY OF #6 SHAKER AND SLIPPED. EE REPORTED ACCIDENT ON 3-5-01. NOT REPORTED BY COMPANY DUE TO PENDING DR.'S REPORTS.

WAS ASSEMBLING TIRES 2 WHEELS ON R-50 EUCLID PICKED UP WEDGE BAND TO PUT IN OUTSIDE WHEEL. HAD SEVERE PAIN IN LOWER BACK. MRI SHOWED HERNIATED DISK.

EMPLOYEE WAS TIGHTENING BOLT ON #12 BELT IN PLANT WHEN WRENCH SLIPPED CAUSING HIS ARM TO HIT SHARP PEICE OF METAL.

EMPLOYEE WAS WALKING DOWN RAILROAD TRACKS AND TRIPPED AND FELL ON RAIL OF TRACK CAUSING FRACTURE TO BONE OF LEFT LEG.

EMPLOYEE WAS BENDING OVER WORKING ON A SNAD PUMPAND PULLED HIP OUT OF SOCKET. EMPLYEE CALLED IN REPORT 5-18-00.

EMPLOYEE WAS CHECKING WIRES TO SENDING UNIT ON LOADER WHEN WRENCH SLIPPED CAUSING HAND TO GET IN COOLING FAN. EMPLOYEE VIOLATED COMPANY POLICY BY REMOVING GUARD WHILE ENGINE WAS RUNNING.

EMPLOYEE WAS PICKING UP FUEL HOSE TO FUEL LOADERAND EXPERIENCED A NAVEL HERNIA. HE WENT TO DOCTOR ON 11/11/99 WHICH WAS REPORTED AT THAT TIME.

EE WAS WASHING UNDER #3 BELT WITH HIGH PRESSURE WATER HOSE. NOZZLE ON END OF HOSE DISCONNECTED FROM HOSE CAUSING WATER HOSE TO HIT EMPLOYEE IN FACE AND HEAD.

EE WAS LIFTING OXYGEN BOTTLES FROM WELDING TRUCK.

EE WAS SHOVELING MUD IN FRONT OF #28 TUNNEL IN PLANT AREA. EE DID NOT REPORT AS ON THE JOB INJURY UNTIL 9-22-99.

EE WAS LIFTING HOOD ON #5 SHAKER WHICH RESULTED IN A HERNIA. EE RECEIVED DIAGNOSIS FROM DOCTOR ON 9-2-99.

EE ALLEGES THAT HE DEVELOPED HERNIAS DUE TO THE FACT THAT HIS HAUL UNIT IS DIFFICULT TO TURN. HE GAVE THE ABOVE DATE AS THE DATE OF INJURY BUT DID NOT REPORT IT UNTIL AFTER DR VISIT. IT WAS RE PORTED ON 4-22-99.

WHILE THE MECHANIC WAS ATTEMPTING TO JOIN THE PULL-DOWN CABLE TO THE ROTARY HEAD, A WELDED RESTRAINING NUT ON THE PULL-DOWN CABLE CLEVIS FAILED AND THE ROTARY HEAD FELL APPROX. 10 INCHES BEFOR E BEING STOPPED BY THE HOIST CHAINS. THE ROTARY HEAD STRUCK THE MECHANIC'S HEAD IN THE FALL. THERE IS NO INDICATION YET WHETHER WORKER ERROR PLAYED A ROLE IN THE INJURY.

EMPLOYEE WAS CLEANING RAIL CARS AND WHEN CLIMBING DOWN INTO A CAR, HIS FOOT SLIPPED ON STEP INSIDE CAR AND CAUSING HIM TO BREAK ANKLE.

EE WAS SHOVELING MATERIAL OFF #21 BELT IN PLANT AND STRAINED MUSCLE IN LOWER LEFT ABDOMEN; WHICH RESULTED IN HERNIA. EE RETURNED TO DR. ON 1-14-99 WHERE IT WAS DETERMINED TO BE A HERNBIA INSTE AD OF A STRAINED MUSCLE.

EMPLOYEE WAS SHUTTING RAIL CAR DOOR WITH STEEL BAR, WHEN BAR SLIPPED HITTING HIM ON THE LEFT ELBOW.

EE WAS PLACING HOOD ON LOADER. WHEN HE FINISHED,HIS FOOT SLIPPED OFF TIRE OF LOADER WHEN STEPPING DOWN ON STEPS. HE TRIED TO CATCH HIMSELF AND HIS ARM SLIPPED DOWN BETWEEN THE HOOD AND HAND RAIL ON LOADER CAUSING A BREAK TO HIS RIGHT ARM

EE WAS CLIMBING UP STEPS WHERE FULE HOSES ARE HUNG, HE TURNED QUICLY, CAUSING A FALL OF APPROX. 7 FT.

EE WAS HELPING LACE BELTING AND PUSHED BELTING OVER WITH HIS FOOT CAUSING PAIN IN HIS RIGHT CALF OF LEG.

EMPLOYEE ADDING OIL TO ENGINE OF LOADER WHEN HAND SLIPPED INTO COOLING FAN OF ALTERNATOR FAN LACERATING MIDDLE FINGER OF RIGHT HAND.

EMPLOYEE WAS GETTING OUT OF LOADER AND JUMPED TO GROUND FROM BOTTOM STEP OF LADDER CAUSING HER TO SPRAIN HER LEFT FOOT.

EMP WAS OPERATING LOADER IN SPECIAL PRODUCTS PLANT. HIT A HIDDEN ROCK IN THE GROUND WITH LOADER BUCKET CAUSING A JOLT AND EMPS UPPER STOMACHE HIT THE SAFETY BAR OF THE LOADER.

EE WAS TIGHTENING WHEEL STUDS ON TRUCK WITH RATACHET, WHEN RATCHET SLIPPED, CAUSING EE'S BODY WEIGHT TO SHIFT ON RIGHT ANKLE.

EMPLOYEE WAS WELDING ON IMPACT CRUSHER WHEN PIECE OF HOT FLUX HIT HIM IN THE LEFT EYE.

EMPLOYEE WAS PINNING BED ON EUCLID FOR REPAIR. HE WAS ALIGNING PIN TO HOLD BED OF TRUCK WHEN HE TOLD OPERATOR TO LOWER BED. THE PIN SLIPPED, CATCHING HIS FINGER BETWEEN PIN AND BED.

EMPLOYEE REINJURED NECK FROM A PREVIOUS SURGERY WHEN A LOADER OPERATOR DUMPED A HUGE AMOUNT OF ROCK IN HER TRUCK, CAUSING HER TO HYPER-EXTEND HER NECK, BECAUSE OF JOLTING OF HER TRUCK.

EMPLOYEE WAS CLIMBING DOWN OFF LOADER, FOOT SLIPPED AND HE GRABBED RAIL ON LADDER, CAUSING HIM TO PULL MSUCLE IN ARM.

EE WAS DRIVING HAUL UNIT DOWN HILL IN PIT AND SUDDENLY GREW DIZZY, DEVELOPED A SEVERE HEADACHE, AND HAD PAIN IN RIGHT ARM. EE WENT TO DR. ON 9-145-94, TO DISCOVER SHE HAD A RUPTURED DISC IN N ECK.

EE WAS CUTTING WELD ON LOADER WITH CUTTING TORCH AND PIECE OF HOT SLAG HIT EMPLOYEE IN EYE. THIS RESULTED IN SERIOUS BURN OF THE CORNEA IN THE LEFT EYE.

EMPLOYEE WAS HOLDING PIECE OF INSULATION WHILE ANOTHER EMPLOYEE WAS CUTTING IT FOR BUS RAILS EMPLOYEE WITH POCKET KNIFE LET IT SLIP CAUSING IT TO CUT INJURED EMPLOYEE'S HAND BETWEEN THUMB AND INDEX FINGER.

EMPLOYEE WAS ADJUSTING BRAKES ON LOCOMOTIVE WITH PIPE WRENCH AND CHEATER PIPE.HE WAS LYING UNDER LOCOMOTIVE AND WHEN HE TURNED PIPE WRENCH,HE STRAINED MUSCLE IN LOWER ABDOMEN.

EMPLOYEE WAS CUTTING ROPE OFF TOOL BUCKET WITH POCKDETKNIFE. KNIFE SLIPPED AND CUT EMPLOYEE'S WRIST.

WIRE CABLE WAS CONNECTED TO FRONT END LOADER TO ADJUST SHORTHEAD CRUSHER. EMPLOYEE GRABBED THE CABLE TO CROSS UNDER IT AND LOADER PULLED FORWARD, CAUSING CABLE TO STRIKE EMPLOYE EON LEFT SIDE OF FACE AND BROW AREA.

EMPLOYEE HAVING COMPLICATIONS WITH LEG FROM SURGERY DUE TO ORIGINAL ACCIEENT ON 08-02-91 PAIN IN LEG & POSSIBLE CYST ORIGINAL ACCIDENT OCCURRED WHEN ANOTHER TRUCK BACKED OUT OF STARTING LINE & HIT EMPLOYEE CAB OF TRUCK IN THE SIDE OF CAB CAB WAS PUSHED IN ON EMPLOYEE & CAUSED HER RT LEG TO HIT SHIFT COLUMN

EMPLOYEE WAS CLEANING OUT RIAL CAR. WHEN DOOR OPENED, DOOR HIT EMPLOYEE ON HIS KNEE.

WALKED PAST OTHER EMP HITTING BEARING CHIPS OF METAL HIT EMP IN WRIST AND CUT ARTERY

COMING DOWN OFF FRONT END LOADER HIT GROUND WITH FOOT R ANKLE TWISTED

EMPLOYEE WAS DRIVING HER TRUCK OUT OF STARTING LINE AND GOING TO PIT AT THE BEGINNING OF SHIFT,WHEN ANOTHER TRUCK BACKED OUT OF LINE AND HIT EMPLOYEES TRUCK IN THE SIDE OF THE CAB.CAB OF TRUCK WAS PUSHED IN ON EMPLOYEE AND CAUSED HER RIGHT LEG TO HIT SHIFT COLUMN.

PROGRESSIVE PAIN IN LOWER BACK DUE TO PREVIOUS INJURY OF OLD SURGERY SITE.

EMPLOYEE WAS PICKING UP PART AT BUSINESS IN TOWN. OWER SLID THE SLIDING DOOR TO CLOSE AND DOOR HIT EMPLOYEE ON THE ARM.

EMPLOYEE WAS HITTING ON CRANKSHAFT OF AIR COMPRESSOR WITH HAMMER AND PUNCH, CAUSING PIECE OF METAL TO CHIP OFF AND EMBED IN UPPER LEFT ABDOMEN.

EMPLOYEE WAS WORKING ON BRAKE CYLINDER WHEN MASTER CYLINDER CAME LOOSE, CATCHING FINGERS BETWEEN PISTON AND HEAD OF MASTER CYLINDER.

BEING RAISED TO TOP WITH BASKET, BOOM LEVER STUCK ON CHERRYPICKER CAUSING BASKET TO FALL ONTOP OF PILE OF ROCK HE WAS THROWN AGAINST RAIL OF BASKET SEP RIBS ON L SIDE

WALKING UNDER CONV LOOSE ROCK FELL FROM BELT HIT IN BACK HEAD AND R SHOULDER

EMPLOYEE WAS HELPING WELDERS PIPE AT SAND PLANT AND FLASH FROM WELDER FLASH BURNED BOTH EYES.

EE DEVELOPED INFECTION IN MIDDLE FINGER OF RIGHT HAND, CAUSED FROM LACERATION TO FINGER ON 9-18-90.

EMPLOYEE WAS STRAIGHTENING SHAKER SCREENS AND PUT CHAIN ON SCREEN TO PLACE THEM IN SCREEN RACK. THE SHAKER SCREEN SLIPPED AND LACERATED MIDDLE FINGER ON RIGHT HAND.

EMPLOYEE WAS STEPPING DOWN FROM CONVEYOR FRAME ONTO CATWALK AND SPRAINED RIGHT ANKLE.

EMPLOYEE WAS TRYING TO CLOSE DOOR ON LOCOMOTIVE AND LOST HIS FOOTING CAUSING HIM TO FALL AGAINST HANDRAIL. EMPLOYEE BRUISED HIS LEFT SIDE, SHOULDER AND PELVIS.

EMPLOYEE WAS PLACING BARREL OF GREASE IN GREASE RACK WHICH IS LOCATED INSIDE THE CAB OF DRAGLINE BARREL SLIPPED & EMPLOYES FINGER WAS TRAPPED BETWEEN WALL OF CAB & BARREL

EE WAS WALKING ON DECK OF PUMP BARGE AND STEPPED IN INDENTION IN FLOOR OF DECK, CAUSING HIM TO TWIST LOWER BACK. THIS CAUSED PAIN TO BE MORE SEVERE IN OLD SURGERY SITE.

EMPLOYEE WAS DRIVING TRAIN IN PLANT WITH EMPTY CARS BEHIND, BLOWING HORN AT 1ST AND 2ND CROSSINGS. TRAIN HIT GRAVEL TRUCK, WHICH DID NOT STOP AT BLINKING LIGHTS AT CROSSING. IMPACT THREW EMPLO YEE INTO HAND BRAKE INSIDE ENGINE, CAUSING HIM TO CRACK RIB.

EMPLOYEE WAS CHANGING BOTTOM DECK SCREEN ON REWASH SHAKER HOOD OF CHUTE WAS PULLED BACK LEAVING CHUTE OPEN WHEN EMPLOYEE STEPPED ACROSS TO SHAKER HE SLIPPED & FELL DOWN CHUTE CAUSING HIM TO HI T LEFT SIDE OF FOREHEAD & PULLING MUSCLES IN LEFT ARM & LEFT UPPER CHEST AREA

EE WAS CLEANING ROCK FROM RAIL CARS WITH HAND HOE AND PULLED RIGHT LOWER SIDE IN GROIN AREA. CAUSING INGUINAL HERNIA.

EMPL WAS SETTING HAND BRAKE ON RAIL CAR WITH PULLING MOTION & PULLED MUSCLE IN LOWER BACK.

EMPLOYEE WAS OPERATING DRAGLINE AND PIECE OF STEEL FROM FRICTION BAND, FLEW IN EMPLOYEE S EYE.

BACK SURGERY DUE TO ORIGINAL INJURY WHEN EMPLOYEE STEPPED DOWN TO THE GROUND FROM DRAGLINE HE WAS OPERATING CAUSING HIM TO HURT HIS LOWER BACK

EMPLOYEE WAS PICKING UP BOULDERS WITH FRONT END LOADER IN PIT AND FIRE ERUPTED FROM UNDERNEATH THE CAB OF THE LOADER.

EMPL SETTING BRAKE ON RAIL CAR AND MISSED STEP WHILE DESCENDING FROM RAIL CAR.EMPL FELL IN DITCH CAUSING HIM TO PULL MUSCLES IN LOWER BACK AND RIGHT HIP.

ORIGINAL INJURY ON 04-04-88 WHEN EMPLOYEE HAD BEEN OPERATING A DRAGLINE WHEN HE STEPPED DOWN TO THE GROUND,HE STRAINED HIS LOWER BACK,CAUSING HIM TO PULL A MUSCLE.

EMPLOYEE HAD BEEN OPERATING DRAGLINE & WHEN HE STGEPPED DOWN TO THE GROUND APPROX.18IN HYE STRAINED HIS BACK

EMPLOYEE WAS COMING DOWN LADDER OF TRUCK AND WHEN SHE STEPPED ON BOTTOM TEP, SHE SLIPPED IN MUD AND FELL LANDING ON HER LEFT HAND CAUSING HER TO CHIP BONE AND TEAR TENDON IN LEFT INDEX FINGER.

EMPLOYEE WAS WATCHING OTHER EMPLOYEE LIFT SCREEN WITH HAND PULLEY UP TO SHAKER WHEN HANDLE ON HAND PULLEY SLIPPED AND HIT HER IN CHIN

EMPLOYEE WAS GRINDING ON HEAD PULLEY WITH DISC GRINDER AND METAL SLAG FLEW FROM DISC AND EMBEDDED IN EMPLOYEES LEFT EYE.

ORIGINAL ACCIDENT 8-29-83.EMPL PULLED SUPPORT STAND FROM UNDER HAUL UNIT.IT HIT MECHANIC SHOP BFFLOOR AND BOUNCED AND FELL ON EMPL.

EMPLOYEE WAS CL9ANING RAIL CARS AND THE INSIDE OF RAIL CAR WAS WET AND EMPLOYEE SLIPPED AND FELL CAUSING HIM TO HURT HIS RIBS

EMPLOYEE WAS DR3LLING HOLES IN METAL PLATE AND WAS WIPING AWAY METAL SHAVINGS FROM DRILL PRESS,WHEN DRILL BIT CAUGHT EMPLOYEE'S GLOVE AND PULLED HIS FINGER UNDER DRILL BIT.

EMPLOYEE WAS CARRYING 5 GALLON CANS OF OIL TO CHANGE OIL IN SHAKER

EMPLOYEE WAS HI7TING CHAIN WITH HAMMER & PIECE OF METAL FLEW OFF & EMBEDDED IN EMPLOYEES LEFT ARM

EMPLOYEE WAS CARRYING 5 GAL CANS OF OIL TO CHANGE OIL IN SHAKER

EMP WAS U SING 7UTTING TORCH AND TORCH WENT OUT. THE ACETYLENE OF THE TORCH AXXUMULATED IN EMP GLOVE AND WHEN HE LIT THE TORCH, THE GLOVE IGNITED CAUSING SECOND DEGREE BURNS TO PALM OF EMPLOY LEFT HAND 3

EMPLOYEE WAS PU7TING IN HEAD PULLEY ON CONVEYOR AND WAS PUSHING THE GEAR BOX TO ALIGN IT AND STRAINED LOWER BACK.

EE WAS CARRYING35 GAL CANS OF OIL TOCHANGE OIL IN SHAKER.

EMPLOYEE WAS CU7TING METAL LINE TO SAND PLANT AND PIECE OF HOT METAL FLEW UNDER LENSE OF SAFTEY GLASSES AND BURNED LEFT EYEBALL.

EMPL HITTING ID5ER PULLEY ON DRILL WITH SLEDGE HAMMER.EMPL STANDING 6' AWAY FROM DRILL AND PULLEY CHIPPED OFF AND EMBEDDED IN RIGHT LEG ABOVE KNEE.

EMP WAS GREASIN1 LOADER AND STEPPED DOWN FROM BUCKET AND TWISTED LOWER BACK

EMP WAS ON TOP 2F DRILL AFTER FUEL TRUCK HAD FUELED DRILL AND WAS LEAVING. FUEL TRUCK HIT HIGH SPORT ON GROUND, CAUSING RAIL AROUND TRUCK TO HIT EMPLOYEES RIGHT KNEE

EMPL WALKING AC9OSS SHOP YARD WIND BLEW SOMETHING IN EYE.

EMPL COMING DOW3 FROM CATWALK AND SLIPPED ON PIECE OF BELTING COVERED WITH MUD AND WATER.EMPL TRIED TO CATCH HIMSELF WITH HAND AND BROKE LEFT WRIST.

EMPL COMING DOW3 STAIRS AT SCREENING PLANT STEPPED ON LOOSE ROCK ON STAIRS CAUSING EMPL TO FALL AND PULL LIGAMENTS IN LOWER BACK.

EMP WAS SHOVELI3G MATERIAL FROM AROUND #21 CONVEYOR BELT CAUSING SHOVEL TO BOUNCE BACK AND HIT EMPLOYEE ACROSS THE NOSE

EMPLOYEE WAS G9TTING OUT OF EU LID WHILE HOLDING ONTO HANDRAIL.EMPLOYEE'S FOOT SLIPPED CAUSING EMPLOYEE TO LOSE HER FOOTING AND SWING AROUND AND TWIST HER BACK.

EE WAS CUTTING 5 BOLT WITH CUTTING TORCH & HOT METAL FLEW IN EES RIGHT EAR.

EMPLOYEE WAS HA4MERING ON BEARING OF 3RD MEMBER SHAFT OF EUCLID AND PIECE OF METAL HIT EMPLOYEE ABOVE UPPER LIP CAUSING PIECE OF METAL TO EMBED IN UPPER LIP

EMPLOYEE WAS CL2SING HEAVY DOOR OF IMPACT CRUSHER & U PULLED MUSCLES IN BACK

EMPLOYEE WAS CO4ING DOWN STEEL LADDER OF RAIL LOADOUT, FOOT SLIPPED ON BOTTOM ROUND OF LADDER, CAUSING EMPLOYEE TO TURN RIGHT ANKLE.

EMP WAS PULLING3UP ON HOSES WHILE REPAIRING EUCLID, CAUSING EMPLOYEE TO STRAIN CARTILAGE BETWEEN RIBS ON LEFT SIDE

EMPLOYEE WAS CL3MBING DOWN LADDER IN SHOP, FOOT SLIPPED AND EMPLOYEE GRABBED PIECE OF ANGLE IRON BESIDE LADDER, CUTTING FINGER ON LEFT HAND.

EMPLOYEE WAS USING LOADER TO CLEAN MATERIAL FROM UNDER BELTS AT IMPACT CRUSHER. HE WAS DUMPING MATERIAL OFFA RAMP OVER CONVEYOR BELT. WHEN HE STOPPED THE LOADER AT END OF THE RAMP. LOADER TIPP ED OVER EMPLOYEE FELL FORWARD OUT OF LOADER, PINNING HIS LEFT LEG BETWEEN LOADER BUCKET AND QUARD AT END OF RAMP.

EMPLOYEE WAS STANDING BEHIND CAB OF MARION SHOVEL & METAL DOOR SLAMMED SHUT ON EMPLOYEES LEFT HAND

EMPLOYEE WAS INSIDE TRUCK AND PULLING UNDER BUCKET OF LOADER.THE HYDRAULIC HOSE OF THE LOADER BLEW OUT,CAUSING BUCKET TO FALL ON BED OF TRUCK,CAUSING EMPLOYEE TO BOUNCE BACK AGAINST WINDOW OF HER TRUCK.THIS DISLOCATED VERTEBRA IN HER NECK.CAUSING HER TO HAVE HEADACHE.

EMPLOYEE WAS HAMMERING ON SKIRTBOARD WITH HAMMER AND THE HAMMER DEFLECTED OFF METAL AND HIT EMPLOYEE ON BACK OF HAND.